My old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
View 3 RepliesA few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
All the folders on my computer are now opening into a new window with the Search function. I have to right-click and choose open to get into my folders. Does anyone have any ideas on how I can fix this?
View 4 Replies View RelatedAny strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies View RelatedIt's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition.
b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
View 11 Replies View RelatedHope I'm in the right category. I'm using an Acer Intel Celeron D, Win XP (Home Edition) and my file system is FAT 32. I've heard that NTFS is superior and I am thinking of converting it. I understand that once converted, it is irrevisible. Should I convert it to NTFS and in what way is it better than FAT 32.
View 5 Replies View RelatedHow to convert a NTFS file system to FAT32
View 14 Replies View RelatedTo convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
View 9 Replies View RelatedJust bought a maxter 300 gb usb high speed 16mb cache.It would work when i pluged it in..So i formated it. and it works fine now.But i noticed it says it is on 279.47 gb in free space after formating.Is this normal? over 20 gb lost seems high to meMy 160 gb USB 2.0 xternial is 152.66 gb.I formated like my other USB hD and my 2 internial ones both 120 GB, they have 111.78 in them.Layout Partition Type Basic File system NTFS
View 4 Replies View RelatedSo what's my question - how can I convert my file system from FAT32 to NTFS and re-install my XP using the recovery disks?
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
View 14 Replies View RelatedLast access time stampsXP automatically updates the date and time stamp with information about the last time you accessed a file. Not only does it mark the file, but it also updates the directory the file is located in as well as any directories above it. If you have a large hard drive with many subdirectories on it, this updating can slow down your system.To disable the updating, start the Registry Editor by selecting Run from the Start menu, typing regedit in the Open text box, and clicking OK.
When the Registry Editor window opens, navigate through the left pane until you get to HKEY_LOCAL_MACHINESYSTEMCurrentControl SetControlFilesystemIn the right pane, look for the value named NtfsDisableLastAccessUpdate. If the value exists, it's probably set to 0. To change the value, double-click it. You'll then see the Edit DWORD Value screen. Enter 1 in the Value Data field and click OK.If the value doesn't exist, you'll need to add it. Select New | DWORD Value from the Edit menu.
How do change the file system from FAT32 to NTFS without using the command menu?
View 1 Replies View RelatedA week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
View 8 Replies View Relatedi used to have win98se before and then i upgraded to winxp pro but fat32 was still there. i used fat32 for quite a while but then i had to use ntfs due to file size limits (2gb) and so i needed to convert fat32 to ntfs. i did that using convert command from cmd prompt. it didnt do it from windows, it said it needs to restart and then do it, so it did thatafter the first reboot windows didn't load up, instead i just got no signal error on my monitor. i tried turning on/off the system but this time not even the boot up details showed up - i just got "no signal" error straight from the restart.
View 7 Replies View RelatedI got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
I have a problem that is more irritating than serious. Every time Windows XP starts a window opens displaying the contents of the folder Program Files. It doesn't take more than a second or two to close the window but I find it frustrating that I am unable to prevent it from happening. I suspect that the answer lies somewhere in the Register but I have no idea where.
View 13 Replies View RelatedXP treats Zip files like folders, to stop this type 'regsvr32 /u zipfldr.dll' at the command prompt.To reverse it type 'regsvr32 zipfldr.dll'.
View 9 Replies View Relatedwhen I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies View RelatedIve been trying to reformat my computer but everytime i try i get this message: The type of the file system is NTFS.Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first.ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.Would you like to force a dismount on this volume? (Y/N)
View 4 Replies View Relatedi have got winXp sp-2 i have got to open hidden files when i go to view and click "show all files" i am unable to view the hidden files again when i go to view folder options and click "show hidden files and folders" after saying apply again it the tickmark goes to "donot show hidden files and folder".
View 3 Replies View Relatedrecently I was messing around with my folder options and i came along the file types in the folders options, as you can see there are many registered file types below, anyway on that list I went along to "File Folders" and I was messing around with it, then i went to the advanced menu and see commands there for stuff...I touched something and now i cant get my folders opening normal.
View 3 Replies View RelatedWhen I start the computer, I get a screen freeze and have to press Ctrl,Alt,Del once before any programs will startup. A lot of probs with internet connection and slowness while surfing as well as a lot of pop up ads in my face.
There are system boxes coming up with registry and dll errors and the whole system seems SLOW.
Is there a way for me to auot open several excel folders automaticaly upon start up each morning?
View 1 Replies View RelatedWhen I open certain folders in my computer, these folder tend to take ages to load. I checked the graph in the performance window (Ctrl+Alt+Del) but there was no suddeny increase of CPU usage. Others folder is normal, I double click and it show nicely. Just for certain folder. Is it because of the number of files in the folder? It dont happen when I open my C: drive but if i open that particular folder. The windows explorer just stop responding.. and i had to wait for it to come out. If i access a folder under it and hit back or up, again it will stuck there again n wait for it to load.
View 2 Replies View RelatedI read alot of manga that I download from online. Now after extracting it from a .rar file I try to open it to read it. Explorer.exe crashes and gives me and error message.
View 3 Replies View RelatedI'm using Windows XP Pro. For the last few days, whenever I click a folder it opens a Search window instead of an Explorer window, as I prefer. I went to Tools > Folder Options > File Types then highlighted "File Folder" and clicked the Advanced button.
View 3 Replies View RelatedI'm running Windows XP SP2 on a Dell Dimension XPS with 250GB hard drive (about 80GB free), 2GB RAM, a Maxtor 300GB USB external hard drive, and an HP Scanjet 5590. Ever since I installed the Maxtor drive and the HP scanner, the respective folders in "C:Program Files" open on the desktop every time I startup Windows. I find this annoying. Under File Explorer folder options view dialog box, I tried unchecking "Restore previous folder windows at logon," which did not help. I looked in my startup folder, but there is no shortcut to these folders there. I checked the registry under "HKEY_LOCAL_MACHINE" and "HKEY_CURRENT_USER" but I cannot seem to find a reference to these folders relating to startup. Perhaps I missed something. Should I be looking elsewhere (in the registry or somewhere else)?
View 6 Replies View Relatedmy problem is that sometimes i open up a window on my desktop but cannot view all of the content in the window because the window is too small to display it all. the window cannot be maximized nor can i scroll up or down or enlarge it by clicking and dragging the edges.
View 7 Replies View Related