Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
View 11 RepliesIve been trying to reformat my computer but everytime i try i get this message: The type of the file system is NTFS.Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first.ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.Would you like to force a dismount on this volume? (Y/N)
View 4 Replies View RelatedI have a GM SATA 160GB External Hard Drive that is USB compatible.During a recent file transfer, a suspected Virus infection caused all folders to executable files which even could not be viewed. Failing in several attempts to recover any of the affected files, I resorted to various formatting procedures including Low-level formatting. RAW file format resulted and now I need an NTFS file format to be able to use the drive!
View 3 Replies View RelatedI was reformating my pc and when i clicked to delete a partition it said it was unable to delete it thus not being able to continue reformatting. I tried almost everything (making a boot disk,...) and i dont knoe whats wrong. I've been able to reformat before but i dont know why. My system is NTFS I'd
View 6 Replies View RelatedI recently switched back to XP after using Ubuntu for a couple years. I had no problems reformatting back to NTFS from XFS, no problems on install, but when I start up I have no sound, and no connection to the internet or to my other machine (which is also an XP machine).When I check the hardware my audio and ethernet come up yellow. I think the audio gives me a code 10 and the ethernet gives a code 28 (I could be wrong about the code 28 I didn't write it down). Now the really odd thing about this is that I put in my Ubuntu live CD and booted Ubuntu up, and right away I had audio and internet running straight from the live CD so I know the hardware must be good. I'm actually posting this from firefox running off of my live CD.I even tried installing a different ethernet card (the one I am using is integrated on the MOBO) and it recognizes it but won't let me get a connection.
View 1 Replies View RelatedAfter formatting my new 120-gig outboard hard drive to NFTS,I backed up my entire C: drive - and yes, it did take ten hours - and I now have a 20-gig Windows .bkf file.I'd like to be able to open the file and see - and perhaps use - the contents if I do something dumb. I tried opening it using the suggested XP backup utility, but while it does seem to be able to return the the backup to the C: drive, it apparently doesn't 'unzip' the file for examination
View 2 Replies View Relatedi got windows xp installed on comp but i wanna reformat them so i put the cd in and press enter to boot from cd and then press enter to make new installation then i come to the page agreement with win xp policies.... press F8 if u accept press ESC if u do not accept and press page down to scroll down to next page well scroll down works esc works except F8 it wont work i keep pressign it but nothing i try rebooting and doign it from start again i press F8 to accept and nothing
View 1 Replies View Relatedi wanna no is how to reformat my computer, what needs to be reinstalled after reformatting (besides windows and the programs i want) and any other piece of info that might be helpful please. my computer has a whole lot of crap on it and i just want it all gone and start fresh.
View 10 Replies View RelatedAny strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
View 3 Replies View RelatedIt's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition.
b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
Hope I'm in the right category. I'm using an Acer Intel Celeron D, Win XP (Home Edition) and my file system is FAT 32. I've heard that NTFS is superior and I am thinking of converting it. I understand that once converted, it is irrevisible. Should I convert it to NTFS and in what way is it better than FAT 32.
View 5 Replies View RelatedHow to convert a NTFS file system to FAT32
View 14 Replies View RelatedTo convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
View 9 Replies View RelatedJust bought a maxter 300 gb usb high speed 16mb cache.It would work when i pluged it in..So i formated it. and it works fine now.But i noticed it says it is on 279.47 gb in free space after formating.Is this normal? over 20 gb lost seems high to meMy 160 gb USB 2.0 xternial is 152.66 gb.I formated like my other USB hD and my 2 internial ones both 120 GB, they have 111.78 in them.Layout Partition Type Basic File system NTFS
View 4 Replies View RelatedSo what's my question - how can I convert my file system from FAT32 to NTFS and re-install my XP using the recovery disks?
A few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
View 14 Replies View RelatedLast access time stampsXP automatically updates the date and time stamp with information about the last time you accessed a file. Not only does it mark the file, but it also updates the directory the file is located in as well as any directories above it. If you have a large hard drive with many subdirectories on it, this updating can slow down your system.To disable the updating, start the Registry Editor by selecting Run from the Start menu, typing regedit in the Open text box, and clicking OK.
When the Registry Editor window opens, navigate through the left pane until you get to HKEY_LOCAL_MACHINESYSTEMCurrentControl SetControlFilesystemIn the right pane, look for the value named NtfsDisableLastAccessUpdate. If the value exists, it's probably set to 0. To change the value, double-click it. You'll then see the Edit DWORD Value screen. Enter 1 in the Value Data field and click OK.If the value doesn't exist, you'll need to add it. Select New | DWORD Value from the Edit menu.
I recently upgraded the hard drive on a pc that I had built and I am sure when I installed windows it was formatted with ntfs, when I installed and cloned to the new drive I noticed it was fat 32, is it possible for windows to change its format?
View 12 Replies View RelatedI already converted my HD from FAT32 to NFTS. I ran the "fsutil fsinfo ntfsinfo c:" and it shows my cluster size of 4096 KB. BootIT NG also confirms the 4KB cluster size.So..Is that all I needed to do? Is there an advantage of formatting a HD directly as NTFS? Is the convert command (with the 4KB cluster size) enough or will a re-format give better security, performance etc.
View 7 Replies View RelatedHow do change the file system from FAT32 to NTFS without using the command menu?
View 1 Replies View RelatedMy old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
View 3 Replies View RelatedA week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
View 8 Replies View RelatedHow do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
View 3 Replies View RelatedBeen trying to reformat my harddrive, format goes well but it will only format it to the fat32 and i want it in the ntfs. now i have tried to convert using the cmd command butit tell me it will convert then restart and for a few seconds it will tell me that it is going to convert may take a few minutes then a few seconds later windows will start and its not converted over. i have the windows xp service pk 2 upgrade cd i tried using that but it never gives me a choice on wwhich file system to use. i know the option is there thou because i installed xp on my mother's as an upgrade from win me and it ask me if i wanted to convert.
Ive recently purchased a used 80gb external portable HD for use with my new USB car stereo head unit.The manufacturers state that the H/U will only recognize the FAT32 file system. Hence I went about formatting (it came formatted) the drive as it came with the NTFS system. When I prepare to format the drive via disk management, it only gives me the option of an NTFS format and no FAT32.
View 4 Replies View Relatedmy hardrive failed and i was forced to format and reinstall windows xp sp2, during the installion i noticed something very intresting.
in the DOS menu of the windows xp installation, a user is usually given an option to delete and created a new partition, upon doing so, the user will be given two choices:
1-format partition into ntfs (fast)
2-format partition into ntfs
I am trying to format my hard drive, it is already converted to NTFS but I cam getting the error message cannot format drive e (my drive letter)I have ran CHKDSK and it is saying unable to perform scan on RAW drives
View 6 Replies View RelatedI got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
my computer at the start up screen runs the check disk tool from windows.It should only try to run the tool once but when it starts up it says connot open or access the ntfs file.Also I tried to start my computer in safe mode today and it pulled upall the way to the black page where it displays the file names but it froze and never went any farther.
View 2 Replies View Related