Last access time stampsXP automatically updates the date and time stamp with information about the last time you accessed a file. Not only does it mark the file, but it also updates the directory the file is located in as well as any directories above it. If you have a large hard drive with many subdirectories on it, this updating can slow down your system.To disable the updating, start the Registry Editor by selecting Run from the Start menu, typing regedit in the Open text box, and clicking OK.
When the Registry Editor window opens, navigate through the left pane until you get to HKEY_LOCAL_MACHINESYSTEMCurrentControl SetControlFilesystemIn the right pane, look for the value named NtfsDisableLastAccessUpdate. If the value exists, it's probably set to 0. To change the value, double-click it. You'll then see the Edit DWORD Value screen. Enter 1 in the Value Data field and click OK.If the value doesn't exist, you'll need to add it. Select New | DWORD Value from the Edit menu.
I'm running XP professional on a system with a 300Gb RAID 1/0 4 disk IDE array. I have mistakenly formatted it with FAT32. I have been told that I would get far better performance if it was NTFS.Would I get this performance increase by letting XP convert the FAT32 to NTFS or would I only get a major performance boost by reformatting with NTFS then reinstalling everything(something that I probably don't have time to do).I am using the space to store video clips and video image sequences.
On my laptop.For some reason, it takes 3-4 min once its at the Windows screen to get to the desktop.I ran HJT and didn't see anything abnormal, but since its the 1st time I used it, I figured I would post here and get some expert advice.Would like to see if I could safely remove anything to help increase bootup performance.
Does anybody have experience with Windows Lite? I have a lightweight laptop with limited 512mb ram running windows XP pro.To increase performance and slow boot up I was recommend download and install Windows Lite.
Any strong views on the advisability of converting a FAT32 drive to NTFS, after upgrading from Win98se to WinXP Pro? And perhaps a word on the best and safest method to use if implementing this
It's a shame that me did a grave error. I am in terrible shock for that I did the following:
a) Installed Sun Solaris Express x86 Developer Edition with a 7.5 GB partition. b) There is Windows XP SP2 on the first 20 GB partition.
I wanted to toggle boot flag by using DOS based fdisk after the Solaris installation. That's where me screwed up I ran a bootable Russian language DOS tools. Instead of toggling the boot flag (option 2 in the fdisk), me accidentally (while taking an overseas call) selected (option 1) the FAT formatting the existing NTFS partition (fdisk ran for 1%, then me immediately stopped and rebooted. But, already damage done My NTFS got screwed up by me.....
I don't know how this happened. But when I went to my D drive which is My Documents, the drive was empty. Though when I check the drive properties it shows that 18G is being used, plus it's showing that the file system is RAW. Not sure how it got that way because it should be NTFS. I am able to view My Pictures and My Music by viewing from the start menu and going to My Pictures or My Music, but when I go to My Documents it's empty.
Now my question is how do I recover those missing files? I'm assuming that they are around because My Pictures and My Music are two of the files that are in my documents folder. This just leaves 25% of the drive I can't view. I can't do system restore because I don't have the D drive being monitored, so I can't do that. I did a virus scan and a spyware scan and the system is clean. Another thing I noticed is if I try to save something to the D drive it will appear to be the only item on the drive, but when I click refresh it will vanish.
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
Hope I'm in the right category. I'm using an Acer Intel Celeron D, Win XP (Home Edition) and my file system is FAT 32. I've heard that NTFS is superior and I am thinking of converting it. I understand that once converted, it is irrevisible. Should I convert it to NTFS and in what way is it better than FAT 32.
To convert your drive or partition from fat32 to ntfs, type the following at Start Run (assuming it's drive c:): CONVERT C: /FS:NTFS. If you are asked if you want to dismount the drive, you must answer yes. Alternatively, you can use a utility such as Partition Magic.
Just bought a maxter 300 gb usb high speed 16mb cache.It would work when i pluged it in..So i formated it. and it works fine now.But i noticed it says it is on 279.47 gb in free space after formating.Is this normal? over 20 gb lost seems high to meMy 160 gb USB 2.0 xternial is 152.66 gb.I formated like my other USB hD and my 2 internial ones both 120 GB, they have 111.78 in them.Layout Partition Type Basic File system NTFS
A few days ago I noticed that when I tried to play a video file that I downloaded with VLC, it actually opened another video file on that hard drive (500GB Seagate, partition G: used for video files) instead of the one I selected. It had played fine earlier, so something must have happened to cause the file system to point to the wrong file.
I didn't pay too much attention to it at first, but then this morning I noticed that this wasn't the only occurrence of this weird error. When I tried to play a podcast episode with iTunes which is located on another partition and another hard drive (320GB Seagate, partition H: used for music files) it *also* was pointing to another music file on that same hard drive. Because this struck me as very odd I tried opening other files on these partitions. Some opened the right file, some opened wrong ones. I've done a chkdsk on both partitions. On the H: partition it did fix some errors, but G: seemed to be fine. Nevertheless, the problem remained. I've tried to google for this problem, but I'm having trouble finding a good search term. I've never had a problem like this before, so I'm unfamiliar with the terminology that might be used to document this problem.
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
My old m/b got fried, so i changed to another m/b and used the same hd for it, and i reinstalled windows XP after deleting the previous, but now when i'm trying to access a folder or file, i get this error "Document may be write protected or encrypted", i really need to open this file, how can i overcome this error?
A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
I got a computer from my boss that had a bad motherboard and processor, i put a new in it and now im trying to format the hd but it has xp on it and has a password, my boss forgot what it was so im trying to format it from dos i wrote "format c:" and it says
"The type of the file system is NTFS. Enter current volume lable for drive C:
Ive been trying to reformat my computer but everytime i try i get this message: The type of the file system is NTFS.Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first.ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.Would you like to force a dismount on this volume? (Y/N)
Am running Windows XP (Service Pack 3) Have 512 MB of RAM - 2.69GHz - Intel - I am self taught on the PC and my system is running very slow. I am not so good on the PC (Computer Illiterate/Beginner)
I have started getting na error message about the virtual memory on my laptop being low and needing to increase the paging file. I have increased the size of it but I am still getting it. The laptop is only 3 months old, and the usage has not changed in any way whatsoever, i done a full cleanup a few weeks ago and all was running smooth.It was only appear the last 3 days for some reason and its really really bugging me as the entire laptop slows down and has to be rebooted the whole time.
I'm running Windows XP Home Edition with SP2 on a Compaq Presario S4100NX and I seem to have a problem with the Windows speed. It's not my internet, I have a fast connection and FF runs very fast and smootly for me. It's like typical Windows stuff. When I open up my Documents folder even when I'm not running much else, it takes long to load. When I open up a program, it takes much too long. I open up a MSWord document, it takes too long. Everything seems slow minus the internet. I don't think it is adware/viruses/trojans or anything as I appear clean and my hardware is in fine condition. Maybe my computer is a bit old? Maybe I have too many processes or programs? I'm not really sure what it is but I'd just like to make my PC run faster.
XPS has slowed down considerably, posting very slow benchmarks on 3Dmark2001 and Aquamark3.The cooling fans run all the time, even when just sitting idle at the desktop. The real problem is that I can't play CS:S anymore, causing me great duress. I used to get 40fps or better, has dropped to 9fps, even off-line playing. The HJT log file looks okay to me, but maybe someone better qualified could look and see if there is something running that shouldn't be. Much thanks in advance.
I had to buy a new Hard drive and OS (XP Pro) because of some critical windows problems. After it's all installdw, updated, and running, I find that it's running a whole lot slower then it used to with the old HD...I figure if anything else with the Clean HD and new OS it should run faster then the old. Any suggestions on why it has slowed down so much?
This isnt really a problem but i was wondering if your page file size really makes a difference on performance. I tried to switch it up from 755MB to 900MB hoping it would make games run faster but it switched right back to 755.
In my quest for XP tweaks to increase speed and boot up speed etc I read the other day that changing to Windows classic makes a difference in speed,but I was wondering if my system was XP then would not the XP theme not be faster as it would be the default? I also read that changing the start menu to classic would help,again I have the same question,would not the default be faster? It's all the small tweaks that added up make a bit of a difference.
I had a problem with my external hard drive…which I informed you guys about. I was advised to solve the problem (potentially) using chkdsk on the drive. It worked to an extent Some, in fact the majority of files were recovered. However the problem remains in that not all files were recovered and NOW one file…when clicked on to gain access I am told that the drive is not formatted and would I like to format it now. Of course, I would not as the information is important. I enclose a copy of my previous letter to give you a full spectra of the saga.I am having problems with an external hard drive I purchased about a year ago. Files seem to be disappearing. I have a file which contained about 12gb of information (music files etc). The file now only has 88mb of information. It is the top part of the files but as you can see is only a raction of what it used to be. What has happened to the files? I have done a search in the drive…and no sign of them. Also, the system information does not register any increase on the ‘free space’ of the drive. I am at a loss. What is happening? Can I retrieve the files? It is really punishing to think that they may be lost to me for good.
