Second Hard Drive Failed Booting On Primary
Oct 12, 2006
I had a two seperate versions of windows installed on two seperate hard drives, when i turn the computer on it asks me which one i want to boot from. well the second hard drive is now dying and somtimes it tells me DISK BOOT FAILURE, INSERT BOOT DISK AND PRESS ENTER. now this only happends when the second hard drive doesnt work. I have tried to just unplug the second drive to see if it would boot off of the original copy on the first drive but i get the same thing.
View 7 Replies
ADVERTISEMENT
Oct 13, 2009
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies
View Related
Jul 1, 2010
Can I just put a Samsung HD253GJ with Windows XP Pro w/ Service Pack 3 preloaded hard drive in a dell p-490 as the primary drive. Plug and play or...what would i need to do?
View 6 Replies
View Related
Mar 25, 2006
Is there a way to partition the primary disk on a computer without reformatting?A computer that I inherited (HP Pavillion) has a 120Gb hard drive partitioned into two sections C drive 104Gb NTFS primary D drive 7Gb FAT32 recovery I would like to split the primary into two sections, if possible without reformatting
View 3 Replies
View Related
Jul 6, 2004
I created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies
View Related
Jul 23, 2009
My problem is a result of a long series of attempts to fix a corrupt Windows registry file. A few days ago I booted my laptop and received a blue screen error: c0000218, relating to a corrupt Windows registry file. Windows could not load. After a lot of searching online I found a way to manually replace this and four other related files from the c:WindowsRepair folder using the command prompt.
This process seemed to work and Windows began to load. I then received a lsass.exe error saying something about invalid passwords. My laptop began an infinite cycle of restarting itself. I looked up the lsass.exe error and people seemed to think it was unrecoverable. As my hard drive was reasonably small (100g) and had been showing some signs of problems I decided to just buy a new one. I went out and purchased a new 320g 2.5" hard drive along with a 2.5" USB drive enclosure and another 1g stick of RAM......
View 6 Replies
View Related
May 16, 2006
I changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies
View Related
Mar 20, 2007
I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies
View Related
Oct 2, 2006
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies
View Related
Jan 15, 2005
Anyways I want to make My MAXTOR my main Hard drive I set it up as a master and Seagate as slave, however when i do so it doesn't boot from the MAXTOR, i used MAXBLAST 3 to set it as a boot drive and it went haywire is it possible to set them both as Bootdrives, backup my files to the 40gig install XP Pro on the MAXtor move my files from 40 to 80gig and then format the 40 gig.If you did not understand this is what i want/Have
View 7 Replies
View Related
Jun 26, 2005
While installing Windows XP, the power went out after about 40% of it had been installed. Now, when I turn on the computer, I get a message that says, "NTLDR is missing. press CTRL+ALT+DEL to reboot." Well, this becomes a never-ending cycle. So, I inserted the Windows XP cd in the cd-rom drive and booted the computer up. I tried re-installing XP and repairing XP. Neither works. So, what I would like to do is completely wipe out my hard drive (nothing I want to save) and start all over.
View 4 Replies
View Related
Jun 4, 2006
only 1 user, 33 processes, ewido and adaware SE scanned free -- but simply opening a word doc made the system hang over and over. Found I could open and print by running Word and opening the files from the 'open file menu' -- did this 12 times, fine. But try to double-click the same file that just printed -- hangs (and same for other files e.g. image files). the Folder showed on two lines in TaskManager Applications ''Not responding'' and no other applications; I did try cleaning registry ist time ever in nearly 4yo computer, restart seemed fine. But still hung on any particular file even with other applications (ie not just Word). Defragged but no better. Then thought of ChkDsk....It asked for restart to access certain windows files......now I canot tell whether CHKDSK is doing something or its just stuck in failing to boot.
View 3 Replies
View Related
Aug 3, 2007
basically I need to know how to make a pc boot from the HD and install XP by copying the XP CD to the HD. Details & reason below:I've formatted the hard drive on a a friends emachine (by putting the HD into my machine) due to mess with viruses etc.Put HD back into e machine and tried to install XP from an OEM XP CD (genuine windows) - it boots and starts install, copying files to the hard drive fine but when it reboots it doesn't continue the install, but just goes back to the start, wanting to copy the files again.So what I'm going to do is put the HD back in my machine, copy the XP CD to a partition on the HD and then put it back in the machine, boot from HD and install XP all from HD. Question is- how do I get it to boot from the hard drive and start the install?I don't have a floppy boot disk or a floppy drive on my machine to make floppy boot disk. I can set the machine to boot from the HD 1st, that's no problem, just don't know how to set up the HD to let it boot from that so I can run the windows install which will be on the partition on the HD.
View 1 Replies
View Related
Oct 24, 2006
Windows XP SP2.I have recebtlky suffered from various Malware and suddenly I have a message Invalid boot.ini booting from C:windows.When I try to recover from CD I get a message that it doesn't recognise the hard drive. Theerefore no restore. I can use my PC but it will re-boot sporadically.
View 21 Replies
View Related
Oct 20, 2009
I'm having a problem with a laptop that will not boot up.
Lenovo 3000 C100
Windows XP Home
After powering it it up it seems like it does not recognize that the hard drive is there so XP does not boot. No error message. It brings up a Boot Device menu screen with the options to boot from Floppy (does not have one), HardDisk (does not work), CD-ROM or PXE. Choosing HardDisk does not work.
In the BIOS screen the hard disk has the status: "Disable" and there does not seem to be a way to change that. In the BIOS boot sequence the hard disk appears as it should. I've tried reordering the sequence but it makes no difference
View 3 Replies
View Related
Apr 30, 2009
Every 3-4days my computer would freeze up while booting up at windows XP screen and scroll bars would freeze.What bohers me about this is i am sure what could be causing this. I use avg as my antivirus,and run A2, spybot,regcleaner, tweaknow on a weekly basis. I keep my system really clean, so now i am wondering is it my HD. PC: Win XP-PRO, 800MHZ AMD Athlon, 1024mb,80gHD. I did what cleaning i could in safemode, it still freeze on scroll bars. I tried last good config, result is the same. The last time i got pass the freezing was by doing a restore.
View 4 Replies
View Related
Dec 12, 2006
I didn't open any suspicious emails, shared on P2P networks and certainly made no changes in system files. Only thing I did was what I do periodically. I defragged my hard drive, uninstalled games and went into msconfig and stopped 3 programs from start up (DEAMON tools, PowerISO and SQL service) I was also having problems with the SpyCop package so I uninstalled and reinstalled.
So I restarted (like I should) and the only process it goes through is the DELL start up "splash screen" After that it usually does the Windows XP "splash screen" but it never does the Windows XP screen, it just stays black, nothing. I pressed F2 to see if anything changed and nothing seemed to, as far as I know. I tried F8 to enter safe mode and a couple lines of text show up and stop and hang. I even tried to let it sit there to see if maybe it's just getting used to the defrag job(s) I did, still black. It's still black as I type this.
View 14 Replies
View Related
Aug 6, 2009
I have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
View 4 Replies
View Related
Jan 23, 2009
My hard drive crashed. When I start up, the device info is supposed to say something like:"Maxtor 2B020H1" but instead I get "Maxtor eph7 hgnk78l" note: the odd device name isnt exact, but I could write it down and post it if it helps.This all happened when I unplugged the ribbon cable from my m/b. -dont ask- lolWhen I plugged it back in I got that message.I have confirmed it is the hard drive itself, by trying it in a different computer.My second problem is, that was my primary master hard drive. I did not have the operating system on that hard drive but, that hard drive contained the xp boot record or ntldr .
View 5 Replies
View Related
Sep 18, 2010
I just put my computer on stand by mode for the first time in my life and now every time i start my computer i get this message " Reboot and select proper Boot device or insert boot media in selected boot device and press a key "And in my setup mode theres no hard drive showing is it gone forever?? Everything was working perfect before i put that accidently on standby mode.
View 4 Replies
View Related
Nov 3, 2005
My friend has a laptop, and the power supply went on it. He gave me his hard drive, so I can back up his data. I removed the hard drive in my laptop, and installed his. When I boot I get a blue screen that says remove any newly installed hard drive or controllers. I cant get windows to boot, so that I can backup the data.
View 3 Replies
View Related
May 12, 2006
Recently I installed Ubuntu Linux on a partition on my secondary hard drive (it's a worthwhile education, I'll give it that). Since then, when in Windows, the remaining space, used for games, alternates between being accessible and being unaccessible. What's the go?For example, when I go in My Computer and try to open D: drive this is the message i receive:D: is not accessible The parameter is incorrect.
View 3 Replies
View Related
Mar 18, 2010
I have Windows 7 installed on my new computer, but my firewire audio card and also some software wouldn't work properly with it, so I put my old hard drive with Windows XP installed on it into my new computer. I can boot up Windows XP from the second hard drive at the bios screen bit, but when it gets to the log in screen, the mouse and keyboard will not respond. I have tried multiple mice and keyboards including the old school style non-USB keyboard. The keyboard works fine to press F12 to get into the boot menu etc but then just stops working completely when XP is loaded. I assume its some kind of driver issue or something like that but I'm pretty useless with computers and I have no idea how I can get my mouse and keyboard to respond in XP .
View 2 Replies
View Related
Jun 12, 2008
I'm basically on 'reinstall not booting Windows XP' duty this week. The problem I have is my father inlaw lost his C.O.A of his tower somewhere between his house, his car and my house, (about 60 miles).I can't boot from his hard drive, however I can 'browse/access' it. I've tried a couple of 'retrieve windows key' programs, which work...on my P.C! I have my key tho! I tried installing one into his hard drive but kept finding my key. Is there a command from 'DOS prompt' or some other measure I can take to recover his serial key?
View 1 Replies
View Related
Nov 8, 2009
bsod at the starting of the hard drive and need to be fix and i can't go to safe mode and here is the bsod code: 0x000000d1 (0x00000000, 0x00000007, 0x00000000, 0x00000000) on a acer veriton 5200 running windows xp home with sp2 or sp3 i don't remember which service pack
View 3 Replies
View Related
Jun 9, 2008
I have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
View 3 Replies
View Related
Feb 5, 2005
My computer has given me problems from day 1. Currently, it fails to recognize my E drive. When rebooting, a black screen appears that says "Secondary drive 1 not found." When restring to an earlier date, a screen says that the E drive cannot be restored because it is either turned off or disabled. The harddrive light which usaully flickers when the computer is working now stays on all the time.
View 3 Replies
View Related
Feb 3, 2010
Dell Dimension 4100 desk top Bios version AO6 Information on Primary IDE master-Primary slave are showing not installed how can I fix this without these computer will not boot up since OS is on primary master drive
View 2 Replies
View Related
Sep 13, 2005
i have a maxtor 3.5 series 40G hard disk and when i turned on my computer it says primary hard disk fail. if i click F1 to continue it says disk boot failure what should i do guys need your help i have important ducoments in this hard disk my computer is a windows xp 2003 version with a OS is Windows 2000
View 14 Replies
View Related
Mar 30, 2006
I did a reformat of my computer. I disconnected my external drive but I also had a smaller drive (internal) labeled D that I use. Well, I just noticed after installing all software and updates that for some reason the C drive is now labeled D and vice versa. Why did this occur and can I change it. I always heard the primary drive should be labeled C.
View 1 Replies
View Related
Jan 2, 2005
I have seen this messge twice. Once on a friends PC and just now on mine. My computer has been running for maybe... 3 days straight now. I turned it off for about 3 hours to keep my room cool. I turned it back on an heard "beep...beep...beep...beep" (the same beep you hear if the ram isn't snapped in the socket all the way) and at the boot up it said "Primary slave hard disk fail" XP would not start. So i hit the reset button, same thing, hit it again, same thing. Powered off and powered back on and it started up fine.
View 1 Replies
View Related
