Anyways I want to make My MAXTOR my main Hard drive I set it up as a master and Seagate as slave, however when i do so it doesn't boot from the MAXTOR, i used MAXBLAST 3 to set it as a boot drive and it went haywire is it possible to set them both as Bootdrives, backup my files to the 40gig install XP Pro on the MAXtor move my files from 40 to 80gig and then format the 40 gig.If you did not understand this is what i want/Have
View 7 Replies
only 1 user, 33 processes, ewido and adaware SE scanned free -- but simply opening a word doc made the system hang over and over. Found I could open and print by running Word and opening the files from the 'open file menu' -- did this 12 times, fine. But try to double-click the same file that just printed -- hangs (and same for other files e.g. image files). the Folder showed on two lines in TaskManager Applications ''Not responding'' and no other applications; I did try cleaning registry ist time ever in nearly 4yo computer, restart seemed fine. But still hung on any particular file even with other applications (ie not just Word). Defragged but no better. Then thought of ChkDsk....It asked for restart to access certain windows files......now I canot tell whether CHKDSK is doing something or its just stuck in failing to boot.
View 3 Replies View Relatedbasically I need to know how to make a pc boot from the HD and install XP by copying the XP CD to the HD. Details & reason below:I've formatted the hard drive on a a friends emachine (by putting the HD into my machine) due to mess with viruses etc.Put HD back into e machine and tried to install XP from an OEM XP CD (genuine windows) - it boots and starts install, copying files to the hard drive fine but when it reboots it doesn't continue the install, but just goes back to the start, wanting to copy the files again.So what I'm going to do is put the HD back in my machine, copy the XP CD to a partition on the HD and then put it back in the machine, boot from HD and install XP all from HD. Question is- how do I get it to boot from the hard drive and start the install?I don't have a floppy boot disk or a floppy drive on my machine to make floppy boot disk. I can set the machine to boot from the HD 1st, that's no problem, just don't know how to set up the HD to let it boot from that so I can run the windows install which will be on the partition on the HD.
View 1 Replies View RelatedWindows XP SP2.I have recebtlky suffered from various Malware and suddenly I have a message Invalid boot.ini booting from C:windows.When I try to recover from CD I get a message that it doesn't recognise the hard drive. Theerefore no restore. I can use my PC but it will re-boot sporadically.
View 21 Replies View RelatedI'm having a problem with a laptop that will not boot up.
Lenovo 3000 C100
Windows XP Home
After powering it it up it seems like it does not recognize that the hard drive is there so XP does not boot. No error message. It brings up a Boot Device menu screen with the options to boot from Floppy (does not have one), HardDisk (does not work), CD-ROM or PXE. Choosing HardDisk does not work.
In the BIOS screen the hard disk has the status: "Disable" and there does not seem to be a way to change that. In the BIOS boot sequence the hard disk appears as it should. I've tried reordering the sequence but it makes no difference
Every 3-4days my computer would freeze up while booting up at windows XP screen and scroll bars would freeze.What bohers me about this is i am sure what could be causing this. I use avg as my antivirus,and run A2, spybot,regcleaner, tweaknow on a weekly basis. I keep my system really clean, so now i am wondering is it my HD. PC: Win XP-PRO, 800MHZ AMD Athlon, 1024mb,80gHD. I did what cleaning i could in safemode, it still freeze on scroll bars. I tried last good config, result is the same. The last time i got pass the freezing was by doing a restore.
View 4 Replies View RelatedI didn't open any suspicious emails, shared on P2P networks and certainly made no changes in system files. Only thing I did was what I do periodically. I defragged my hard drive, uninstalled games and went into msconfig and stopped 3 programs from start up (DEAMON tools, PowerISO and SQL service) I was also having problems with the SpyCop package so I uninstalled and reinstalled.
So I restarted (like I should) and the only process it goes through is the DELL start up "splash screen" After that it usually does the Windows XP "splash screen" but it never does the Windows XP screen, it just stays black, nothing. I pressed F2 to see if anything changed and nothing seemed to, as far as I know. I tried F8 to enter safe mode and a couple lines of text show up and stop and hang. I even tried to let it sit there to see if maybe it's just getting used to the defrag job(s) I did, still black. It's still black as I type this.
I had a two seperate versions of windows installed on two seperate hard drives, when i turn the computer on it asks me which one i want to boot from. well the second hard drive is now dying and somtimes it tells me DISK BOOT FAILURE, INSERT BOOT DISK AND PRESS ENTER. now this only happends when the second hard drive doesnt work. I have tried to just unplug the second drive to see if it would boot off of the original copy on the first drive but i get the same thing.
View 7 Replies View RelatedI have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
View 4 Replies View RelatedMy hard drive crashed. When I start up, the device info is supposed to say something like:"Maxtor 2B020H1" but instead I get "Maxtor eph7 hgnk78l" note: the odd device name isnt exact, but I could write it down and post it if it helps.This all happened when I unplugged the ribbon cable from my m/b. -dont ask- lolWhen I plugged it back in I got that message.I have confirmed it is the hard drive itself, by trying it in a different computer.My second problem is, that was my primary master hard drive. I did not have the operating system on that hard drive but, that hard drive contained the xp boot record or ntldr .
View 5 Replies View RelatedI just put my computer on stand by mode for the first time in my life and now every time i start my computer i get this message " Reboot and select proper Boot device or insert boot media in selected boot device and press a key "And in my setup mode theres no hard drive showing is it gone forever?? Everything was working perfect before i put that accidently on standby mode.
View 4 Replies View RelatedMy friend has a laptop, and the power supply went on it. He gave me his hard drive, so I can back up his data. I removed the hard drive in my laptop, and installed his. When I boot I get a blue screen that says remove any newly installed hard drive or controllers. I cant get windows to boot, so that I can backup the data.
View 3 Replies View RelatedRecently I installed Ubuntu Linux on a partition on my secondary hard drive (it's a worthwhile education, I'll give it that). Since then, when in Windows, the remaining space, used for games, alternates between being accessible and being unaccessible. What's the go?For example, when I go in My Computer and try to open D: drive this is the message i receive:D: is not accessible The parameter is incorrect.
View 3 Replies View RelatedI have Windows 7 installed on my new computer, but my firewire audio card and also some software wouldn't work properly with it, so I put my old hard drive with Windows XP installed on it into my new computer. I can boot up Windows XP from the second hard drive at the bios screen bit, but when it gets to the log in screen, the mouse and keyboard will not respond. I have tried multiple mice and keyboards including the old school style non-USB keyboard. The keyboard works fine to press F12 to get into the boot menu etc but then just stops working completely when XP is loaded. I assume its some kind of driver issue or something like that but I'm pretty useless with computers and I have no idea how I can get my mouse and keyboard to respond in XP .
View 2 Replies View RelatedI'm basically on 'reinstall not booting Windows XP' duty this week. The problem I have is my father inlaw lost his C.O.A of his tower somewhere between his house, his car and my house, (about 60 miles).I can't boot from his hard drive, however I can 'browse/access' it. I've tried a couple of 'retrieve windows key' programs, which work...on my P.C! I have my key tho! I tried installing one into his hard drive but kept finding my key. Is there a command from 'DOS prompt' or some other measure I can take to recover his serial key?
View 1 Replies View Relatedbsod at the starting of the hard drive and need to be fix and i can't go to safe mode and here is the bsod code: 0x000000d1 (0x00000000, 0x00000007, 0x00000000, 0x00000000) on a acer veriton 5200 running windows xp home with sp2 or sp3 i don't remember which service pack
View 3 Replies View RelatedI have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
View 3 Replies View RelatedMy computer has given me problems from day 1. Currently, it fails to recognize my E drive. When rebooting, a black screen appears that says "Secondary drive 1 not found." When restring to an earlier date, a screen says that the E drive cannot be restored because it is either turned off or disabled. The harddrive light which usaully flickers when the computer is working now stays on all the time.
View 3 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I was wondering if there is any way to boot my new Windows XP computer off of an old Windows 98 Hard Drive without screwing anything up. What I am trying to do is access and run a program that was installed on the WIN 98 Hard Drive. The software was an expensive Patent Software and I no longer have the installation disk.Here is what I have already tried:1. Connected the WIN98 hard drive to my XP Computer and booted up. Computer started to boot into WIN98 but came back with some kind of memory error and shut down.2. Tried running the software from the WIN98 Drive in WINXP but came back with an error about missing DLL files.Someone mentioned running the drive as a virtual machine.
View 1 Replies View RelatedI think I have a simple question....maybe not. All I want to do is boot to XP home located on different drives, one older, one newer but both with SP2Just built new computer (first time builder) I installed three hard drives, drive H is a new boot disk with XP home, drive C is a storage disk from old computer and disk L is the older boot disk with XP home (reformatted within the past year). The MB assigned the drive letters, not me.H and C are slave and master on Primary IDE, L is Master attached to a PCI card.I want to boot from L. Boot sequence does not recognize L but it does offer the option of booting from OTHER DEVICE so I disable all drives (including H,C and two dvd drives) but it still boots to the new H drive.The bios does not recognize drive L (I guess cause its attached to the PCI card?). My thinking is that if I set up L directly to MB and switch one of the DVD drives to the PCI card it will work.If I do that then I think the MB will recognize drive L and allow me to set it up in the boot sequence the same way that the new drive works.I don't know what I should worry about BUT I am sure that I don't know what will go wrong.
View 2 Replies View RelatedI live with went on a rampage and felt like throwing my desktop around. Anyways, when I go to boot it up and use the Boot disc (XP Home Edition) It goes through but says it can't find the hard drive. Can someone please tell me how to fix this. I know how to open the case of my computer and everything.
View 6 Replies View RelatedI was working on the computer yesterday when it froze up on me. I didn't think much of it, so I rebooted and continued what I was doing. Later that same day, the computer locked up about 2-3 more times. Then I started hearing ticking noises coming from inside. I shut it off after it froze again. When I powered it back on, the screen during bootup that displays my Hard drive's status (I have four HDs, paired up with one another), says that the first set of hard drives (which is where the OS is on) is healthy, and on the other set, it gets an error with red text. I rebooted, and sure enough, they were both healthy again.
This is where it messes up. It starting loading the Windows logo, with the progress bar. The next thing it does is go black. It doesn't boot at all after that. I have to reboot everytime. I then tried to boot in safe mode. Black screen again. I tried all the possible options in the boot menu, none of them worked. That's where my first problem takes off. So I now have a non-booting OS. The next thing I do is insert the Windows boot disk, and installed Windows XP on the same HD the original OS was on (Don't ask why, I don't know either). After the installation, Windows booted up fine, except I was running on a fresh install. Which how I'm on this site...........
I have a computer at home with two identical 160 GB WD SATAII drives in it and I want a copy of XP on each drive. The first drive (Which I have been using as my gaming computer) has already got XP installed and I want to keep it pretty much free of anything but games so it won't affect performance. On the second drive, I would like to install another copy of XP and use this drive for my common use and with the primary intent of using it for a HDTV capture device. I've researched it for a while and have almost only been able to find information concerning dual booting with IDE drives using a jumper switching device so you don't have to dismantle the computer every time you switch drives.
View 11 Replies View Relatedcurrent HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
my computer MB took a dump so I bought a new system. I figured I just boot the new system using my old hard drive. No dice. So I boot the new system using the hard drive and OS that came with it and installed my old drive as a slave. When I try to access the documents and settings folder on the old hard drive so I can pull over the favorites, documents, etc. to my new drive it says access denied. The username and password on my new system are the as on the old one. Any ideas on how to get access to that folder?
View 9 Replies View RelatedI have a P4 HT (old one) I formatted its hard disk using another comp to install a fresh copy of WinXP but the bootable XP is unable to start as there is a "GRUB" message that is last shown and then nothing happens.I have only 1 drive attached to this comp which is this one.it is running in a slave mode(doesn't matter as its the only default drive for the motherboard to read, and i have lost my jumper pin so thats y it is running in a slave mode.)What shd i do abt this "GRUB" message and how shd i go about installing WinXP ?
View 2 Replies View Relatedit now wont go past the windows loading screen. I have tried to boot from his windows xp disc (to perform a repair) via changing the boot order in the bios but it wont do it. I even set all the boot orders to go from the cd and still nothing. I have tried multiple xp discs to no avail. If I get into safe mode the drive seems to be working fine. Windows recognizes the drive and that a disc is in there.
View 8 Replies View Related
