I just formatted my PC, I installed windows xp pro again but it installed everything on my small drive h: drive which only has 4gig on it, is there a way to change everything back to my c: that has 107gig on it? I installed a couple of programs and its already full.
View 1 Replieshow do you change the name of the computer (not the user account names) the main one when you're installing windows
View 7 Replies View RelatedI am having an issue with changing the main drive letter on my mother's computer. I made a pretty amateur mistake when I was re-installing Windows XP for her and left my external hard drive connected from taking her files off of her old hard drive so the installing found "H:" being the most appropriate drive letter and now a few badly written programs she has tried to install automatically fail because they are set to look for drive "C:".I know my only option is to re-install yet again to get a fresh start, but I was hoping there was another possibility (albeit might be harder) to set the drive letter right. Typically I went to "manage" and "drives and storage" and attempted to change the letter, but Windows will not allow me to change the drive letter of the main volume. If anyone has any suggestion, please throw them out there-I may have made an newbie mistake, but I know my way around pretty well.
View 8 Replies View RelatedI have a hard drive that comes with my PC and that has a corrupted Windows, but the boot.ini still works fine. So I got a new hard drive and installed a new fresh copy of Windows XP on it. So now I want to format the old hard drive and use the new hard drive as the boot drive. However, if I removed the old hard drive, the new hard drive doesn't boot at all. I've tried using the FIXMBR, FIXBOOT, and BOOTCFG /REBUILD commands, but I think I did it wrong.
View 4 Replies View RelatedMy main HD is about to give up. It's making strange noises whenever I start up or have a file on that drive open.Could I buy a new HD and install it as a slave drive. Then clone my main drive to the slave drive and then get rid of the old main drive and put the clone in as my new main drive? Without a lot of f***ing about?The reason I ask about doing it this way is that I don't have a set of XP disks, I just have the recovery disk that came with computers 8-10 years ago. It's pre sp1 and I've used it three or four times already and I'm sure it will be more hassle than I need to re install from it.I'm running XP sp2. When I had this comp put together they had to do a raid controller, I don't really know what that is. Something to do with the fact that the main drive is IDE only and my current second drive is IDE or Sata but is in place as an IDE drive.
View 8 Replies View RelatedWinXP Pro SP2..Multiple drives USB, SATA, EIDE..Had WinXP on C:. Drive started getting a little flaky, created an XP parallel install on newly formatted NTFS drive F: Dual boot works fine, can choose either install to boot, (of course the F: install is newer/cleaner/faster)C: continues to go south, taking the bootloader with it.Is there some way to make the drive F: installation bootable, so that I can jettison the wonky C: drive? It's not a question of BIOS boot order, or whatever, if I disable C: and set the F: disk as the boot device, I get an error message about inserting bootable media.I'm fooling around with Acronis Disk Director and OS selector, but that doesn't seem to get me completely there.
View 5 Replies View RelatedI took out a driver from a computer and installed it as a slave on a new one and tried to copy everything on it but it won't let me access the one main user folder--its say I don't have access rights, but I am logged on as an Administrator. How do I change that?
View 3 Replies View RelatedToday I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
I have XP pro and have been trying to change the name of the name in Outlook Express from MAIN IDENTITY to Len and I have ended up with 2 names and Main ID and Len will not delete and if I ask it to start in Main ID I get this message, THE CURRENT IDENTITY COULD NOT BE CHANGED BECAUSE ONE OF THE APPLICATIONS WAS UNABLE TO SWITCH. CLOSE ANY DIALOGUE BOXES IN OTHER APPLICATIONS BEFORE TRYING AGAIN. I have nothing else open how to get back to main and get rid of Len.
View 5 Replies View RelatedWhen ever I am clicking on something the window that I want opens behind the main one. Lets say your in control panel, you click on add and remove or user accounts. It doesn't pop up in front of the control panel.I see it on the task bar and I just click it to make it display. What could the cause or settings for this?
View 3 Replies View RelatedI have encountered rather a frustrating problem and am quite desperate for any help. Apologies for the long post, but I wanted to make sure to include all the relevant steps of how I reached the point I'm at now.Yesterday, running Windows XP Home Edition SP2, I tried out Google's new "Lively" program (3D interactive chat; mostly integrated into a web browser--Firefox in my case) for the first time. Later on in the day, just before bed, I decided I should defragment the C hard drive, as I had not done so in quite some time.I started the defragmenter while I was still tinkering with Lively, which was probably a bad choice, and perhaps very silly of me. A few moments after starting the defragmentation process, I clicked an option in Lively (to alter my avatar I think) and the system hung; both the mouse and keyboard no longer got any response from the computer.I waited for a little while, then I was able to move the mouse pointer again. I clicked in my browser window a couple of times to test responsiveness, but the system froze once more. After several minutes I gave up on waiting and went to bed, leaving the system to hopefully sort itself out.
View 8 Replies View RelatedMy main pc is running XP mostly, and has started locking up while using different applications. I have watched it with Task Manager and Process Explorer and I don't see anything out of the ordinary running. So far I have watched Ad-Aware SE, Spybot Search & Destroy, Nod32 and Sonicstage omg. lock up while in use. Is there some way to set up a log file that will tell me what is happening when XP locks up. I would like to have more info on the reason for the problem.I can reinstall but I would really like to understand what is going on. This has never happened to me before.
View 2 Replies View RelatedI have a dual monitor setup on my PC. Today, when I boot it up, the main monitor displayed all theboot information and startup stuff, however, when the system SHOULD have gotten to the user login screen, the main montor came up with "no signal." The secondary monitor at this time will still show my mouse moving around on it, and I'm able to move the mouse over to the main monitor but I can't see anything.I've gone through a few basic manuevers to see what was wrong. I booted in safe mode and logged in to my mai account and attempted to change the other monitor to the main one; However, Safe Mode does not appear to supoort multi-monitor and I couldn't change this. After that, I attempted to VNC into my computer with the notebook I'm on now. When I came to the login dialogue box, the only account I could log into was the invisible "Administrator" account. My main account, as well as a temporary account I created for testing, both came up with an error "Cannot access due to user restrictions." My theory is that because all of the accounts which are actually visible on the login screen seem to not be working, the login is bugging and not outputting anything to my main monitor (since I have verified both monitors and connections to be working properly).
View 6 Replies View RelatedI am having a puzzling little problem with my HP desktop computer.I am running windows xp service pack 2.At random times a little cream colored vertical cursor appears at the lower left-hand section of the main desktop screen near to the start tab.It appears every now and then for a few seconds it blinks at a fairly slow rate, then it disappears.Everything else is working fine.The computer boots up fine it doesnt freeze or go to a blue screen.Its just that little annoying cursor that pops up that shouldnt be there.It doesnt belong to any software (like a word processor) that I own.Does anyone have any idea what could be causing it and what I would have to do to make it go away.Has anyone heard of this? I have anti-virus software and its up to date and running.It doesnt detect any viruses.So I am kind of baffled.The cursor doesnt seem to effect anything but its just annoying more so because I dont know whats causing it.At least if I knew what it was maybe I wouldnt feel worried about it.
View 12 Replies View RelatedI'm administering a heterogeneous TCP/IP-based network with Windows 98, Windows 2000, Windows XP (2 computers), Linux, and SGI's IRIX. I have a problem with one of the Windows XP computers. lets call it Laptop.Laptop can see all of the other computers that put out Windows-accessible shares and can browse any folder that shows up in its own Network Neighborhood.
Everybody can see Laptop in Network Neighborhood
Everybody can see the shares on Laptop -- and everybody sees the same list of shares
Everybody can browse Laptop's C-drive and E-Drive.
No one can browse either Laptop's main user's My Documents or the general Shared Documents folders.
Have rebuilt my desktop, new mobo, 160G HD, 1G Ram. Mobo is a fujitsu that is listed on the HCI, but needs external video card - using Geforce. Win XP-SP2 from Tiger/OEM version. Did the install/format Hd, install finishes, restarts and does a particial boot -- Win XP main screen comes on, then screen flashes over to a poor quality XP main screen, and halts. Restart in Safe Mode, boot starts but when main screen should appear, horiz. lines and blue text type symbols, as if Geforce video card not being functional.
View 6 Replies View RelatedWhen I look with the Explore facility the size of all my directories in C: I found roughly 8.3 GB, When I look at the used space with Property on C: I found 26.2 GB or 3 times more ! The remaining free space si 1.5 GB.I cannot understand why.I have deleted all the temp files, try to delete the maximum unnecessary
files but I now cannot go much further so I cannot defragment for instance and I suppose I am going into a wall soon if I do not act quickly.
In a 3 box network,is it possible for the 2 satellite boxes to access the main cpu at the same time? Even if the 2 satellites are to run different programs? I know that individual programs give full PROGRAM access simultaneously to 2 satellites on 1 main cpu.
View 6 Replies View Relatedreacently updated pc-cillin anti virus and now when I try to open the program I get an error message (PNT.MAIN.EXEC has encountered a problem). Then it shuts down.
View 1 Replies View RelatedI recently re-installed xp on my desktop after a long run with ubuntu. After installing XP, and getting everything together, it made the local disk G. Is it possible to change this to C? Without too much damage?
View 6 Replies View RelatedMy A drive (floppy disk) does not work. Hence, I bought an external floppy disk drive which works very well. This second drive has been named "3 1/2 Floppy B:" by the computer. The problem is that I am working with a program that is looking for floppy drive A, not B, and since drive A is useless, I'm wondering how I can have the program recognize drive B as the correct drive to use. I attempted to rename drive B as drive A, but the computer would not allow me.
View 14 Replies View RelatedI just bought this comp. I ' pretty sure it has a 20gig hard drive. I want to put in my old one with 80Gig
View 1 Replies View Relatedafter I did a clean install on my daughters Dell E310, Win XP Home Edition there are now a C drive and a D drive. Partioned how?
I know I can go to my Computer and manage to delete one drive, but what happens if I delete the drive that has the important files to run the OS?
I just upgraded my "guts" (mobo, ram, cpu) and am trying to get all set up. I installed windows XP on a brand new hard drive on a newly created partition. On the setup screen, it says C: Partition1 [NTFS] I left some unpartitioned space on the new drive for a later win xp 64bit version install and I also have another HD that is listed as D: Partition1. After the install, my system disk drive letter was F: and my other HD letter was E: I go to disk management and I can change my second HD letter but it won't let me change my system drive letter back to C:. How do I get my system drive letter back to C:?
View 1 Replies View RelatedFor some reason, my boot drive is showing up as D while my secondary drive is showing up as C. This is messing up my program files and various other stuff. I can't change any profile settings and can't install anything. How do you change the letters in XP?
View 7 Replies View RelatedWhat i would like to do is remove this old drive all together. The program is it was the c: drive, and xp was installed on the d: partition. is it possible to change the system to recognize the D drive as the system drive instead of c so i can remove it and still have a functional computer?
View 7 Replies View Relatedi stuck the cd in and followed the prompt to do a clean install. after the whole process i noticed that it was installed on the d: partition of my harddrive and not on the c: the original win2000 is still installed on the c: drive. how do i remove the original from the c: drive and move the d: to the c: because the c: drive has a larger partition.
View 14 Replies View RelatedI have a Dell computer with the following drives:
A: 3 1/2" floppy drive
C: Local drive
D: CD drive
E: DVD-RW drive
F: My Book "external drive"
T: Removable drive "HP Printer D7160"
Every now and then the F & T drives will switch drive letters when this happens I cannot get into the F drive. Is there some way I can get into a built in program and change drive letters??
rsimoneau
i reformatted my windows partition to try and solve a constant crash problem.my hd is divided up into 2 partitions with the second being where i stored all my data and mp3's.I only formatted the windows partition and now my second partition is inaccessable.The drive letter has also changed from k to d..i tried changing the drive letter back to k and the partition was still inacessable.Any help would be awsome on this.I would hate to lose 100+ gigs of data
D: is not acessable
the file or directory is corrupted and unreadable
I have 2 drives, one with Windows and such, and the other with about 1,000 games that my girlfriend plays. She let her grandson on, unsupervised, and the next thing is a trashed system drive. Unfortunately, there was no way to save it, so I did a format and clean reinstall of XP Home. Goback was on the drive, and there was no way to uninstall it before the reinstall. The reinstall went fine, but the GAME drive is virtually inaccessible. It doesn't show in My Computer, but does show in Admin Tools, Disk Management. However, the drive name is shown as F(F. It should either be D: or F: ( there are 2 optical drives). I can't change the name or drive letter. I get the error "the drive is locked".
I tried Partition Magic, and it will change the info, temporarily. Also, PM shows the drive as *.F It doesn't give any error message, and says the change has been applied, but it obviously hasn't. I searched this forum for "hard drive locked" and followed suggestions that I had not tried previously. The smiley replaced a colon; the entry should read F(F. Sometimes I think I might know what I'm doing, and then I realize, maybe not.