Today I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
XPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
View 9 Replies View RelatedI just got a new 300 GB Seagate internal hard drive installed after running out of space on my 40 GB one. I need to know how to move stuff off the 40 GB master drive to my 300 GB slave drive. I'm using Windows XP.
View 14 Replies View RelatedMy hard drive is partitioned in to C; and D: files. My C file is almost full, and my D drive (which is the bulk of the drive) is nearly empty. I want to transfer files (such as program files) from the C drive to the D drive to free up space on the C drive. How can I do this?
View 2 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedI am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies View RelatedI had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
View 2 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedA friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies View RelatedI installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedAfter working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
View 3 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View Relatedi screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
View 4 Replies View RelatedWhenever I open up My Computer and browse Local C drive, it takes at least 10 seconds to open up a single folder. I did chkdsk /f /r thing and found no errors on my C drive. I am also possitive that my PC is malware free.
View 14 Replies View RelatedI have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View RelatedI have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
View 14 Replies View Relatedi connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
View 9 Replies View RelatedI just formatted my PC, I installed windows xp pro again but it installed everything on my small drive h: drive which only has 4gig on it, is there a way to change everything back to my c: that has 107gig on it? I installed a couple of programs and its already full.
View 1 Replies View RelatedI recently re-installed xp on my desktop after a long run with ubuntu. After installing XP, and getting everything together, it made the local disk G. Is it possible to change this to C? Without too much damage?
View 6 Replies View RelatedMy A drive (floppy disk) does not work. Hence, I bought an external floppy disk drive which works very well. This second drive has been named "3 1/2 Floppy B:" by the computer. The problem is that I am working with a program that is looking for floppy drive A, not B, and since drive A is useless, I'm wondering how I can have the program recognize drive B as the correct drive to use. I attempted to rename drive B as drive A, but the computer would not allow me.
View 14 Replies View RelatedMy external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies View Related