My hard drive is partitioned in to C; and D: files. My C file is almost full, and my D drive (which is the bulk of the drive) is nearly empty. I want to transfer files (such as program files) from the C drive to the D drive to free up space on the C drive. How can I do this?
View 2 RepliesThis is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I saved some old CAD drawings using DOS commands onto a USB memory stick, to be able to transfer the CAD files onto another computer running Win XP Pro SP3. The old DOS based CAD files on the USB memory stick were not recognized by Windows Explorer. When the old HD connected via USB to the Win XP computer happily allows files to be transferred. The memory stick has lots of files on it saved under Win XP and most of it not recognized on the DOS machine, but none of the directories created or files saved on the memory stick from the DOS machine are recognized by the Win XP machine.
View 6 Replies View RelatedI would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
View 3 Replies View RelatedI have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive.
I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
View 2 Replies View RelatedToday I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I have a new SATA hard drive and wish to make it my primary drive (so that I can dispose of the tiny IDE drive I originally had) but my PC did not come with installation discs for XP.I've tried searching the net to find out how to move the operating system from one drive to another but without any luck (all I can find are articles which tell you to boot from the installation disc - which I don't have!!!)
View 6 Replies View RelatedHow would I go about transferring windows XP (sp3) and all contents (prog's, folders, files etc.) from 1 disk to another.It is installed on 320gb main drive and I want to transfer it to a new bigger drive (both internal) in the same PC?I have a program called "Clone directory" if that's any good.
View 2 Replies View RelatedI was wondering how to transfer the files on my full C drive to my D drive that doesn't have hardly anything on it. Is there an easy way to do this that i can understand?
View 14 Replies View Relatedhow to transfer evrything from old HD to new HD(just bought a second hands comp. but HD only 40G has every softwares i want it.I want to put in 300G HD.
View 7 Replies View RelatedI have a Dell Precision 530 and a Precision 650. Both are runningWindows XP Pro. I'd like to take the Seagate scsi hard drive from the530 and move it as-is with all the programs and data into the 650. Theproblem is that it won't boot in the new workstation. It sees thedrive in the scsi bios but, when XP boots, I get the error"inaccessible boot device." The 530 has an Adaptec scsi card and the650 has an LSI. I've tried booting off the XP CD, loading the scsidriver from floppy, and then running a repair.
View 9 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedI have a pc with Windows 2000 installded and has two partition C and D. Iwould like to backup the whole drive including both partitions and transfer it to a better pc I have, but the new pc of mine has XP installed on it. I already backedup the hard drive to the network file server using windows 2000 default backup wizard, but when I want to open the file on my XP machine, It curupts the system files and next time I restart it crashes. I need to findout a way to backup the hd exactly as is on 2000 and transfer it to Xp.
View 2 Replies View RelatedI am trying to install driver for blackberry storm. I installed the driver but Wizard installer wouldn't find it, even when I identified specific location. I did workaround on device manager by pointing to the device (USB controller) then browsing to the driver's location and when it recognized it I hit the "next" button for the install, the file transfer hangs.
View 12 Replies View RelatedI'm curious. Is it possible to take my current copy of XP that came with my computer, uninstall it / remove it onto a flash drive / cd (even transfer it to my laptop) and then use it on a new computer that I'm going to get? They are charging $80-100 for a copy of XP and this could significantly reduce my price. I would also need to know how to install it on this new computer if this is possible, which is unlikely.
View 4 Replies View RelatedI was using Windows XP Prof on my PC, and was supplied with a Recovery CDfor Windows along with my PC, and the Hard Drive crashed, Now i wish toinstall Windows on a new Hard Drive, but the CD is a recover CD.How do i install Windows to new Hard Drive without encountering the problem of CD Key already being registered
View 7 Replies View RelatedRead a similar post, but resetting system preferences and "taking control" didn't work. Windows XP laptop
1. His board is fried
2. took hard drive out, put in enclosure
3. transferring data to another external Hard Drive
4. when attempting to transfer "documents" he gets an access denied read out
5. Says he has no option to change system preferences
6. "taking control" hasn't worked
7. right clicking etc. hasn't worked
8. says when he tries to view documents he gets a "documents empty" read out and there is nothing there
My old PC which was running XP died but I copied files to my external hard drive. They are now sitting on there as a dat file and I want to import and use these dat files in VISTA.
View 2 Replies View RelatedI bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
View 1 Replies View RelatedXPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
View 9 Replies View RelatedI just got a new 300 GB Seagate internal hard drive installed after running out of space on my 40 GB one. I need to know how to move stuff off the 40 GB master drive to my 300 GB slave drive. I'm using Windows XP.
View 14 Replies View RelatedTrouble watching video from one of my hard drives (XP). At first I thought it was a codec problem so I uninstalled and reinstalled the codecs but that never worked.
Then I tried watching video on the other hard drive and no problem there.
I confirmed that its a hard drive problem when I tried to copy one of the files from the problematic hard drive, it showed 30mins left where it normally takes 1-2mins.
I checked to see if the channel was in PIO mode but all are in DMA.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedNow however, my hard drive seems to contain approx 13GB of data which I am unable to locate, even when viewing the "hidden files" option. I first noticed this increased used space when I wanted to defragment the hard drive and noticed that there was only 45% free space available (there is usually 75%).I have viewed the properties of all the folders on the C: drive and they do not add up to the 20GB shown on the C: drive properties...The defragment report states that "some files in the volume could not be defragmented"
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
View 2 Replies View RelatedI am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies View RelatedI had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
View 2 Replies View Related