Transfer Files From DOS To Win With USB Flash Drive
Sep 14, 2010
I saved some old CAD drawings using DOS commands onto a USB memory stick, to be able to transfer the CAD files onto another computer running Win XP Pro SP3. The old DOS based CAD files on the USB memory stick were not recognized by Windows Explorer. When the old HD connected via USB to the Win XP computer happily allows files to be transferred. The memory stick has lots of files on it saved under Win XP and most of it not recognized on the DOS machine, but none of the directories created or files saved on the memory stick from the DOS machine are recognized by the Win XP machine.
I'm curious. Is it possible to take my current copy of XP that came with my computer, uninstall it / remove it onto a flash drive / cd (even transfer it to my laptop) and then use it on a new computer that I'm going to get? They are charging $80-100 for a copy of XP and this could significantly reduce my price. I would also need to know how to install it on this new computer if this is possible, which is unlikely.
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
I have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive. I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
My hard drive is partitioned in to C; and D: files. My C file is almost full, and my D drive (which is the bulk of the drive) is nearly empty. I want to transfer files (such as program files) from the C drive to the D drive to free up space on the C drive. How can I do this?
I bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
I am trying to import files and settings from old PC to a new one using a flash drive.The files were collected and are on flash drive File name USMT2IMG.Dat What is the procedure to get them on the new PC so they will be imported?I copied the file and it is in My Docs but when I am asked where to look for the file it is not there to select. I know it is there because I can open My Documents and see it.Don't understand this at all.
My antivirus detected krag.exe and removed it from my flash drive. However, when I try to open the drive by double-clicking on the corresponding drive (F in My Computer, a pop-up window appears saying "Choose the program you want to use to open this file:". I chose windows explorer since it's what you use when trying to explore or browse through files.
The problem is, the "Always use the selected program to open this kind of file" is grayed out and can't be checked/ticked. So, I have to keep pointing the "open with" pop-up box to explorer.exe whenever I want to browse the files in my flash drive.The last attempt that I did to fix this problem was to right click on the drive letter then properties then went to the autoplay tab and chose "Open folder to view files". The "Open with" pop-up box still appears whenever i double click on the drive letter.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
This in plain non-techie English? My Microsoft Camera and scanner Wizard no longer comes up when I insert the FLASH-CARD from my HP digital camera in the FLASH-DRIVE on my PC. Nothing happens now, It worked great for 2 years.How do I get the wizard back so I can unload my camera using the flash-card in the flashdrive?I have WXP-Home/SP2. I downloaded some XP security updates but don't know if they caused the problem.
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
I installed a driver/USB File Transfer on two computers and connected the cable into its USB ports. I am not able to transfer files from older computer to a new one.
I installed a driver/USB File Transfer on two computers and connected the cable into its USB ports. I am not able to transfer files from older computer to a new one.
I have some game giles i want to transfer from my laptop to my dell desktop. It is 3GB's worth, Any ideas on how to get the files there? Emailed would take too long. so i was thinking of sort of like. connecting the laptop to the dell but im not sure if thats possible.
I have two win XP laptops, and i need to transfer some files across. Is there a way to wirelessly transfer file between PCs, either with or without 3rd party software. I might have to just resort to USB, but it would be great if i could sort something that may take longer initially, but will overall save time.
This problem started up after the last format of my computer. I have the usual folders shared on my computer which consists of my shared docs, music, DOD/CS:S maps and games. During LAN parties (or any other time) nobody can get files off my computer. They are shared just fine, they can see the files, but when we try to transfer it says "Cannot copy *filename* - access is denied. make sure the disk is not full or right protected and that the file is not currently in use." The file transfer bar will go like it is transferring, but when it is done I get that message. It doesn't make sense. I have these two boxes checked under "sharing" in folder properties: "share this folder on the network" and "allow network users to change my files." All firewalls are off. This happens over 4 different routers. I have reconfigured the network many times.
The only thing I can think of that may have caused it is that I deleted the microsoft .net asp account that is installed with microsoft .net framework. would that do it? I haven't had the energy to re-install that yet. I deleted it so I wouldn't have to select an account on startup. Anyway, if you have any input I would appreciate it because this is annoying. Update: And I have just determined that I can listen so some songs on media player over the network, but I can never transfer them between computers.
My external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
I had a problem with my windows. When ever I plug in my Flash drive (i got a few: kingston data traveller 1gig, pendrive 128mb,etc) onto my usb port. Window will be able to detect the drive had been plug in. I can see the "Safely Remove Hardware" icon on the right side of my task bar. But i cannot see the drive appearing in "My Computer". If I double click on the "Safely Remove Hardware" icon and try to view the external drive information, I can see that its already detected and being assign with drive E: . Even if I open a windows explorer and type in E: , it will throw me an error "Cannot find 'file:///E:/'. Make sure the path or Internet address is correct". But if I were to restart my computer, then i can see it for the first time. If I disconnect it (thru the "Safely Remove Hardware") and plug it back in (or plug another flash drive), I cant see the external drive. Causing I had to restart my computer multiple time a day.
okay guys i joined the real computor race, i just got a compaq, 512mb pentium 4/ 2.0 ghtz processor, and winxp professional installed with 40gb hard drive. so now i need to know (step bystep) how to get all the stuff i want off my dinosaur, hp celeron, 64mb, 6gb hd, and win98se, onto my new computer.
I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
I'm working on a computer running Win XP. We had previously installed a second, bigger hard drive, so she wouldnt lose any space on her c drive, which is only 9GB. Problem is, she's now down to about 147MB on the C drive, and we are afraid of a crash. Can I use the Files and Settings Transfer Wizard to move some of her programs to the bigger drive?? The new drive is 120 GB, and we want to just leave the operating system on the C drive, and move everything else. We have already run the disk cleanup wizard, emptied temp folders, and deleted unused programs (except for Quicken.it doesnt seem to want to uninstall.
I want to use the restore CD's on my laptop, win2000, but I'd like to save both data files and installed software and drivers. Is it possible if I can transfer to an external hard drive? Or, can I only save the data files? How can I save the software and drivers?
I’m having problems with my operating system. I want to install a fresh copy of it. Can you tell me or show me step by step documentation as to how to partition my drive (or refer me to documentation as to how to do so), install a clean copy of WXP from my Dell OEM Windows XP SP1a CD into the new, empty partition, update everything necessary on it (note, again, I received the WXP SP2 CD from Microsoft by mail a few days ago), transfer any files from my current installed O.S. copy into this newly installed copy that I want to install, and then delete this current (then old, once I do this) copy of my O.S.? Are there any Microsoft documents about this? Would this be better than just reinstalling the O.S. over the one I currently have in my computer?
I have a new SATA hard drive and wish to make it my primary drive (so that I can dispose of the tiny IDE drive I originally had) but my PC did not come with installation discs for XP.I've tried searching the net to find out how to move the operating system from one drive to another but without any luck (all I can find are articles which tell you to boot from the installation disc - which I don't have!!!)
