I have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive.
I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
Comp is running Windows XP Pro. From the begining, I put a HDD w/ 40GB as master an other w/ 40GB as slave. Everything was fine until one day HDD D: was gone, no in ''MY Computer'', ether on BIOS, files associates to drive D: can't be opened. Opened computer, unplug data cable of drive D:, plug again, restart, and drive D: come again, everything is fine, working as usual. One week after, drive D: has gone one time again. What can I do to keep seen drive D:? Thank all.Pentium 4, Intel Mother B., drive D: storage only, no OS.
I have a new SATA hard drive and wish to make it my primary drive (so that I can dispose of the tiny IDE drive I originally had) but my PC did not come with installation discs for XP.I've tried searching the net to find out how to move the operating system from one drive to another but without any luck (all I can find are articles which tell you to boot from the installation disc - which I don't have!!!)
How would I go about transferring windows XP (sp3) and all contents (prog's, folders, files etc.) from 1 disk to another.It is installed on 320gb main drive and I want to transfer it to a new bigger drive (both internal) in the same PC?I have a program called "Clone directory" if that's any good.
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I am using Symantec Ghost to image new computers. I have a computer that is running windows 2000 and I am going to a new computer with windows xp pro. I need to move the software programs but not take a complete image of the win 2000 computer.
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
how to transfer evrything from old HD to new HD(just bought a second hands comp. but HD only 40G has every softwares i want it.I want to put in 300G HD.
I have two hard drives connected to my system. I will refer to them as A and B. I had previously taken a Ghost image of drive A and wanted to restore this image to the drive. However, both the drive were connected to the system when the restore occurred and the image got restored to drive B. Hence I have lost the data I had on drive B. The operating system in use is Windows XP. The version of Ghost used is Norton Ghost 2001
I need to transfer data, settings and programs from one notebook to another. Should I expect trouble if I make a ghost image of the hard drive on the original notebook, image it on to the new notebook and install all the drivers for the new notebook? There are a few large programs and alot of critical data and settings, so if this method works, I would like to do it this way. The old notebook will have Mandrake installed, so the XP license will continue to only be used on one computer.
I was using Windows XP Prof on my PC, and was supplied with a Recovery CDfor Windows along with my PC, and the Hard Drive crashed, Now i wish toinstall Windows on a new Hard Drive, but the CD is a recover CD.How do i install Windows to new Hard Drive without encountering the problem of CD Key already being registered
Read a similar post, but resetting system preferences and "taking control" didn't work. Windows XP laptop
1. His board is fried 2. took hard drive out, put in enclosure 3. transferring data to another external Hard Drive 4. when attempting to transfer "documents" he gets an access denied read out 5. Says he has no option to change system preferences 6. "taking control" hasn't worked 7. right clicking etc. hasn't worked 8. says when he tries to view documents he gets a "documents empty" read out and there is nothing there
My old PC which was running XP died but I copied files to my external hard drive. They are now sitting on there as a dat file and I want to import and use these dat files in VISTA.
I saved some old CAD drawings using DOS commands onto a USB memory stick, to be able to transfer the CAD files onto another computer running Win XP Pro SP3. The old DOS based CAD files on the USB memory stick were not recognized by Windows Explorer. When the old HD connected via USB to the Win XP computer happily allows files to be transferred. The memory stick has lots of files on it saved under Win XP and most of it not recognized on the DOS machine, but none of the directories created or files saved on the memory stick from the DOS machine are recognized by the Win XP machine.
Trouble watching video from one of my hard drives (XP). At first I thought it was a codec problem so I uninstalled and reinstalled the codecs but that never worked. Then I tried watching video on the other hard drive and no problem there.
I confirmed that its a hard drive problem when I tried to copy one of the files from the problematic hard drive, it showed 30mins left where it normally takes 1-2mins.
I checked to see if the channel was in PIO mode but all are in DMA.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
My hard drive is partitioned in to C; and D: files. My C file is almost full, and my D drive (which is the bulk of the drive) is nearly empty. I want to transfer files (such as program files) from the C drive to the D drive to free up space on the C drive. How can I do this?
I bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
Now however, my hard drive seems to contain approx 13GB of data which I am unable to locate, even when viewing the "hidden files" option. I first noticed this increased used space when I wanted to defragment the hard drive and noticed that there was only 45% free space available (there is usually 75%).I have viewed the properties of all the folders on the C: drive and they do not add up to the 20GB shown on the C: drive properties...The defragment report states that "some files in the volume could not be defragmented"
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
Too much junk in my Hard Disk and registry so I did a complete new install of WindowsXP Home. As I was doing this and then installing all of my software I had not realized that my flash drive was plugged in and WinXP then named my Hard Disk drive F: So everything is now on drive F: and working well. In the new install, XP created my Hard Disk NTFS. Now, I used ghost to clone my Hard Disk. XP called the backup drive C: Backup finished fine, BUT, when I switch drives and put the backup in only, the computer will not boot up. I get to the blue Welcome screen and that is where is sits. I tried the ghost GhReboot.exe program, but no help.
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
Just got a new machine and the primary drive is an SATA drive... but I still want to get old files of my old hard drives by hooking them up the the ide connections. Unfortunately, for one drive when I put it in the machine it gives me a missing hal.dll error and when I put the other drive in it gives me a ntrdl missing error. is there any way I can force the machine to boot to my SATA drive when the IDE drive is in there? I suspect it is trying to boot to the old drives when I install them.
I have a computer that I need to take all of my existing files off of so that I can erase the HDD. I also have a 150gb external USB HDD. What is the fastest way to transfer all of my files on to my external HDD, and make them so that they are viewable by my other computers. I am running all Dell computers with Windows XP Professional on them.
I noticed lately that the files that are in the attached picture that have the numbers and then _backup just recently showed up on my c: drive and my d: drive. Now they have attached themselves on all my external western digital passport drives drives too.
I cant delete them, they say they are locked. I have also downloaded unlocker 1.8.7 and it wasn't able to delete the files either. I have run system mechanics, prevx malware, kaspersky nitvirus program and didn't find anything wrong. The haven't caused any problems that I know of except I wasn't able to format my d: drive.
