My old PC which was running XP died but I copied files to my external hard drive. They are now sitting on there as a dat file and I want to import and use these dat files in VISTA.
View 2 RepliesBut I wanted to know how do I install Windows XP operating system on my external hard drive. I am currently running Windows Vista Premium on my desktop. Please advise me regarding this question.
View 3 Replies View RelatedTrouble watching video from one of my hard drives (XP). At first I thought it was a codec problem so I uninstalled and reinstalled the codecs but that never worked.
Then I tried watching video on the other hard drive and no problem there.
I confirmed that its a hard drive problem when I tried to copy one of the files from the problematic hard drive, it showed 30mins left where it normally takes 1-2mins.
I checked to see if the channel was in PIO mode but all are in DMA.
I've got Windows XP home and two external hard drives (connected via USB) and I'm trying to give one or both of those drives paging files. My hard-drives are an I-Omega 500GB and a Maxtor 300GB, both with plenty of room. I want to set my paging file to 650MB.I know how to change the size of a paging file. I go to System advanced performance...etc to get to the virtual memory box, I set the paging-file sizes for the external drives (remembering to press SET) then reboot. When the computer has restarted I run a disc analysis, but the external drives have no paging file.I notice that many people move their paging file to an external drive, so why isn't it working for me?
View 14 Replies View RelatedRunning Windows XP home, well-protected from viruses and spyware with all the usual recommended programs. I have a 160G external firewire hard drive, NTFS system. Cannot access data all of a sudden, I am getting an error message, "file system corrupt and unreadable." In disk management, the drive is listed as healthy, 160G, but no NTFS listed. What could have caused this, and is there a way to retrieve the data? Are there any low-cost or freeware programs to do this, or is it inevitable to spend a "fortune?"
View 32 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
quality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies View RelatedI bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
View 1 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedI have a new SATA hard drive and wish to make it my primary drive (so that I can dispose of the tiny IDE drive I originally had) but my PC did not come with installation discs for XP.I've tried searching the net to find out how to move the operating system from one drive to another but without any luck (all I can find are articles which tell you to boot from the installation disc - which I don't have!!!)
View 6 Replies View RelatedHow would I go about transferring windows XP (sp3) and all contents (prog's, folders, files etc.) from 1 disk to another.It is installed on 320gb main drive and I want to transfer it to a new bigger drive (both internal) in the same PC?I have a program called "Clone directory" if that's any good.
View 2 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View Relatedhow to transfer evrything from old HD to new HD(just bought a second hands comp. but HD only 40G has every softwares i want it.I want to put in 300G HD.
View 7 Replies View RelatedI was wondering how to transfer the files on my full C drive to my D drive that doesn't have hardly anything on it. Is there an easy way to do this that i can understand?
View 14 Replies View RelatedI would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
View 3 Replies View RelatedI have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive.
I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
View 2 Replies View RelatedI was using Windows XP Prof on my PC, and was supplied with a Recovery CDfor Windows along with my PC, and the Hard Drive crashed, Now i wish toinstall Windows on a new Hard Drive, but the CD is a recover CD.How do i install Windows to new Hard Drive without encountering the problem of CD Key already being registered
View 7 Replies View RelatedRead a similar post, but resetting system preferences and "taking control" didn't work. Windows XP laptop
1. His board is fried
2. took hard drive out, put in enclosure
3. transferring data to another external Hard Drive
4. when attempting to transfer "documents" he gets an access denied read out
5. Says he has no option to change system preferences
6. "taking control" hasn't worked
7. right clicking etc. hasn't worked
8. says when he tries to view documents he gets a "documents empty" read out and there is nothing there
I am trying to install driver for blackberry storm. I installed the driver but Wizard installer wouldn't find it, even when I identified specific location. I did workaround on device manager by pointing to the device (USB controller) then browsing to the driver's location and when it recognized it I hit the "next" button for the install, the file transfer hangs.
View 12 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedI've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have a usb external hard drive. Can I install windows os on this drive and use it.I am told that windows must be installed only on main hard drive 9i.e. drive 0).
View 10 Replies View RelatedRecently, my motherboard fired, but the Hard drive was uneffected. Since i had a lot of info on the hard drive i tryed to find people who could take the info off the hard drive for me. I then had this great idea of just putting my hard drive into a "Hard Drive Enclosure Kit". Well, i did that and it worked great. But theres one problem, I can't seem to get into the Owner folder of the hard drive, for evey time i do, it brings up.
View 8 Replies View RelatedI just recently purchased a 100 Gb laptop hard drive together with an outer case and a USB cable. I just wanted to upgrade my laptop's hard disk, by first making an image of my current drive into my new one through the outer casing. The thing is when I connect it to my laptop, windows cannot detect it. Whats wrong with it? Is there anything I have to do?
View 9 Replies View RelatedMy problem is that I am trying to use a 60 GB ATA / 133 Maxtor DiamondMax Plus 9 Internal Hard Drive as an External Drive as a Slave and I am having trouble getting my bios to recognize it.The Hard Drive is hooked up in the same way as an Internal SATA DVD burner setup as an External DVD Burner that is running on Windows Office XP 2003 and it works fine. So what suggestion would you give me so that I maybe able to get the bios to recognize this drive?
View 2 Replies View RelatedFound some very useful info on here so decided to sign up and post a recent problem i encountered with an external hard drive. the hard drive has a capacity of 80GB and came from another pc. there was a 25/55 partition already on it from the old pc. i tried to delete the partition that was 25gb. now i can't find that 25gb at all. when i plug it in to the usb slot i can only see the 55gb partition it used to appear as 2 hard drives in my computer and nothing else. when i use disc management to format it i only see 55gb.
View 2 Replies View RelatedTo anyone that might be able to help... I've had this external hard drive for a long time and I haven't been able to access it to store lots of music and videos on. My computer sees that it is there, but like I had said earlier, I can't use it. It won't let me see it unless I go to Device Manager. My computer is getting old on me and it's been places most labtops shouldn't have gone... Once in Purgatory, and now, it's on Hell's surface. I get the safely remove hardware icon down by my clock, but I don't want to remove it, I want to use it. I want it to show up in my drives so I can instantly see how much space I have left and what not... I went through the Troubleshooter, tried every possible way that I can think of, the ways the troubleshooter.
View 2 Replies View RelatedI have a Sony VAIO desktop running Windows XP. I purchased a Comstar 160MB External USB2 Hard-Drive and installed it. Since Windows XP is supposed to have the drivers that are necessary, no driver disk was included, and none was needed.The problem developed when my Windows XP began to give me problems later. I had to re-install Windows XP. I did that, and I downloaded all Windows XP up dates (including Service Pack 2). Now, this Windows installation does not install the external hard-drive. Windows recognizes that there is "a USB2 device," but Windows states that there are no drivers and asks me to furnish them.
View 2 Replies View Related