Found some very useful info on here so decided to sign up and post a recent problem i encountered with an external hard drive. the hard drive has a capacity of 80GB and came from another pc. there was a 25/55 partition already on it from the old pc. i tried to delete the partition that was 25gb. now i can't find that 25gb at all. when i plug it in to the usb slot i can only see the 55gb partition it used to appear as 2 hard drives in my computer and nothing else. when i use disc management to format it i only see 55gb.
I have had a 60G external hard drive that has worked flawlessly for 2 years with both my desktop computer running Win98SE, and my newer laptop with Windows XP. This external drive was formatted with FAT 32 and NO PARTITIONS for all 60G. Because I have a Lot of music files and digital pictures, I have filled up the 60G drive, so bought an IOGear 160G external drive. This drive arrived partitioned into 6 partitions, of 20-32G sizes. This is completely wrong for how I want to use the drive. All my mp3 programs requires the library to be all in one volume, so I need 60-80G all in one volume just for music. IOGear support says that Windows XP does not allow volumes any larger than 60G in FAT 32. (This seems crazy since my older drive is all one volume and is FAT 32.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
XP home edition re-installed, it gave the hard drive three partitions, C, D, and E. C drive has 9.75GB the other two have over 60 GB. I need to put more back to C drive.
1st post here and I hope someone has answers. THis is new to me. Ihave a 200gb HD. I have it partitioned into 5 partitions. Onepartition for my C: OS, D: Software, E: Games, F: Storage, G:Graveyard. Well I do this so if anything happens to my OS, I canreinstall and all my other info is safe. After the reinstall of myOS, everything was perfect, I had some issues with my G drive andaccess denied but I managed to take ownership. Well I installed someupdates etc last night and did some restarts without any issues. Idecided to do a disk check on G upon next boot up. Well I just bootedup this morning and only my C drive exists now, All my software whichis installed on my D drive is now inaccessable as well as all theothers. I went to Computer Management and it shows the rest of mypartition as 175gb of FREE SPACE?
I have a 200gb Seagate SATA HD. I have it partitioned into 5 partitions. One partition for my C: OS, D: Software, E: Games, F: Storage, G: Graveyard. Well I do this so if anything happens to my OS, I can reinstall and all my other info is safe. After the reinstall of my OS, everything was perfect, I had some issues with my G drive and access denied but I managed to take ownership. Well I installed some updates etc last night and did some restarts without any issues. I decided to do a disk check on G upon next boot up. Well I just booted up this morning and only my C drive exists now All my software which is installed on my D drive is now inaccessable as well as all the others. I went to Computer Management and it shows the rest of my partition as 175gb of FREE SPACE? Anyone has any ideas? There is no way that the rest of my drive is formatted as I never touched it so I assume it is still there.
A while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
I have a Thinkpad T43 with Win XP Pro. The 60GB hard drive has two partitions: one is an IBM_PRELOAD(C) and the other is an IBM_SERVICE partition. I would like to duplicate this disk onto a 120GB disk. I have tried to use the Win XP backup Retrospect Express 6.5, but I can't get either program to duplicate the IBM_SERVICE partition.
I want to partition my new hard drive. Its external. OS is windows XP. I had a look on the net and it looks simple, go to disk management and right click on the drive you want to partition and select 'new partition' This is the problem, i dont have the option to create a new partition. I have formatted my drive to NTFS and there is no data on it. It currently shows one partition the whole size of the drive.
Sometime early next year I will be building a new system. The system will likely have one large hard drive. As of now I will be installing XP Pro. I was curious how everyone else splits up their drive. How big of a partition is generally created for the OS. And do most people partition the remaining space.Now a file architecture question. When non OS applications games, utilities, MS Office, etc.) are installed do most people put then in D:Program Files Or create separate sub-folders for the broad categories and install them in the appropriate sub folder.
I have partitioned my hard drive and loaded Windows XP in one partition. How do I set the default to load any programs into the second partition. My intent is to only have the operating system in the first partition.
I currently have 2 partitions on a single hard drive (each one is running xp).The older partition (the one that I want to get rid of) is the primary partition, while the newer one (the one that I want to keep) is the extended partition. Could someone please tell me how to delete the primary partition and make the computer recognize the extended partition as the primary partition?
When I bought my new pc with XP SP2 I added a second hard drive(FAT 32) that I'd already used for a while in my old pc, and that contains all my data, photo's, music etc. Everything worked fine, but over the past month something strange is happening. From one moment to the other Windows loses sight of that second drive. Sometimes restarting (in every possible way) helps, sometimes not. Sometimes the drive disappears when I'm saving omething to it, sometimes I can save.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
I have multiple partitions on my HD so that I can have things like the OS and the page file on separate partitions for ease of defrag etc. (OK, haven't done this before and am not sure how smart it was after all)Anyway, I decided to move "My Documents" folder from the C drive to a much larger partition to save fragmentation on C. No big deal, it's easy to do.But here's the kicker... once I'd created a My Documents folder in the larger partition, I decided to click on it and move it to the top of the list of folders, using the My Computer screen.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have a usb external hard drive. Can I install windows os on this drive and use it.I am told that windows must be installed only on main hard drive 9i.e. drive 0).
Recently, my motherboard fired, but the Hard drive was uneffected. Since i had a lot of info on the hard drive i tryed to find people who could take the info off the hard drive for me. I then had this great idea of just putting my hard drive into a "Hard Drive Enclosure Kit". Well, i did that and it worked great. But theres one problem, I can't seem to get into the Owner folder of the hard drive, for evey time i do, it brings up.
I just recently purchased a 100 Gb laptop hard drive together with an outer case and a USB cable. I just wanted to upgrade my laptop's hard disk, by first making an image of my current drive into my new one through the outer casing. The thing is when I connect it to my laptop, windows cannot detect it. Whats wrong with it? Is there anything I have to do?
My problem is that I am trying to use a 60 GB ATA / 133 Maxtor DiamondMax Plus 9 Internal Hard Drive as an External Drive as a Slave and I am having trouble getting my bios to recognize it.The Hard Drive is hooked up in the same way as an Internal SATA DVD burner setup as an External DVD Burner that is running on Windows Office XP 2003 and it works fine. So what suggestion would you give me so that I maybe able to get the bios to recognize this drive?
To anyone that might be able to help... I've had this external hard drive for a long time and I haven't been able to access it to store lots of music and videos on. My computer sees that it is there, but like I had said earlier, I can't use it. It won't let me see it unless I go to Device Manager. My computer is getting old on me and it's been places most labtops shouldn't have gone... Once in Purgatory, and now, it's on Hell's surface. I get the safely remove hardware icon down by my clock, but I don't want to remove it, I want to use it. I want it to show up in my drives so I can instantly see how much space I have left and what not... I went through the Troubleshooter, tried every possible way that I can think of, the ways the troubleshooter.
I have a Sony VAIO desktop running Windows XP. I purchased a Comstar 160MB External USB2 Hard-Drive and installed it. Since Windows XP is supposed to have the drivers that are necessary, no driver disk was included, and none was needed.The problem developed when my Windows XP began to give me problems later. I had to re-install Windows XP. I did that, and I downloaded all Windows XP up dates (including Service Pack 2). Now, this Windows installation does not install the external hard-drive. Windows recognizes that there is "a USB2 device," but Windows states that there are no drivers and asks me to furnish them.
I'm partitioning an external hard drive that's connected to my Win XP machine. I set an 80GB partition for XP (NTFS). When I tried to allocate the rest of the drive as a FAT32 partition (for my Win98 machines), FAT32 was not an option, until I reduced the partition size to 20 GB. I'm using XP's Disk Management. Is there a maximum limitation of FAT32 partition size?
I got a usb external hard drive 650gb where in it couldn't resist in the docs as it says it should be powered down unless in use. In this case how can i get back to the service pack.
I have a file folder that is 247 MB on XP that I'm trying to copy to my external Passport Hard drive. I've been able to copy all files to the external except this one, but every time I try it elicits an Error Copying File or Folder ie. "Cannot Copy File". What's up with that?
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
I copied my data files to my external Maxtor hard disk before I tried to reformat my internal hard drive and reload Win XP. However during my partition, I didn't realize I still had the external drive (160GB) plugged in and it showed up at the top of the list and the original internal (80GB) below it. So, I followed the instruction mistakenly and went through the process of deleting the partition(on the external hard drive) and tried to partition it into two drives. Then I got an error message as I continue to try to format the hard drive "Your computer's startup program cannot gain access to the disk containing the partition or free free space you choose . Set up cannot install Window XP on this hard disk." I stopped, reboot and tried to go through the delete partition several times with the same error message. After several attempts, I realized that the external hard drive was still plugged in.
So I unplugged the external hard drive and reboot to go through the process of reformatting and partition the internal hard drive into C drive and E drive and loaded Win XP. Now even though I plugged in the hard.After I installed the external hard drive's software,driver and restarted the computer, I connected the external hard drive and don't see the drive in my computer. I could find it under Control Panel/System/Device Manager/Disk drives but it doesn't show up as an external hard drive under "My computer" with a drive letter. Under the disk management, I see the drive as Disk1 but it was unallocated. Did I lose all my data due to the delete of partition? Can I recover my data and drive ?
I am really annoyed cause I can't delete most of the files on my external hard drive, nor can I format it. I tried using this program that has always successfully deleted files off of my C and F drives. It seems there is no way to delete these files.