Files & Transfer Wizard To Copy C - Drive Replace Original E Drive
Jan 12, 2006
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
View 6 Replies
ADVERTISEMENT
Nov 14, 2009
My hard drive is partitioned in to C; and D: files. My C file is almost full, and my D drive (which is the bulk of the drive) is nearly empty. I want to transfer files (such as program files) from the C drive to the D drive to free up space on the C drive. How can I do this?
View 2 Replies
View Related
Nov 9, 2008
I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
View 2 Replies
View Related
Jul 1, 2005
I'm working on a computer running Win XP. We had previously installed a second, bigger hard drive, so she wouldnt lose any space on her c drive, which is only 9GB. Problem is, she's now down to about 147MB on the C drive, and we are afraid of a crash. Can I use the Files and Settings Transfer Wizard to move some of her programs to the bigger drive?? The new drive is 120 GB, and we want to just leave the operating system on the C drive, and move everything else. We have already run the disk cleanup wizard, emptied temp folders, and deleted unused programs (except for Quicken.it doesnt seem to want to uninstall.
View 13 Replies
View Related
Aug 5, 2010
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
View 6 Replies
View Related
Sep 30, 2009
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
View 2 Replies
View Related
Sep 14, 2010
I saved some old CAD drawings using DOS commands onto a USB memory stick, to be able to transfer the CAD files onto another computer running Win XP Pro SP3. The old DOS based CAD files on the USB memory stick were not recognized by Windows Explorer. When the old HD connected via USB to the Win XP computer happily allows files to be transferred. The memory stick has lots of files on it saved under Win XP and most of it not recognized on the DOS machine, but none of the directories created or files saved on the memory stick from the DOS machine are recognized by the Win XP machine.
View 6 Replies
View Related
Aug 7, 2005
I have two eMachines both running Windows XP Home SP2 and would like to transfer some files from one to another. However, after I run Files and Settings Transfer Wizard on both computers, connect them with PC to PC serial cable and click AUTODETECT, both machine turn off.
View 1 Replies
View Related
Apr 16, 2007
I would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
View 3 Replies
View Related
Oct 15, 2007
I have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive.
I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
View 1 Replies
View Related
Sep 2, 2006
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
View 2 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Aug 30, 2005
I want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I
get it to write to my CD on drive E?
View 4 Replies
View Related
Dec 15, 2006
My computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
View 3 Replies
View Related
Aug 13, 2005
I dislike my cd-rom drive(Dynex). Is there any reason why I can't replace it, as my reader, with a Sony cd-r/rw drive? I have it as a spare.
View 4 Replies
View Related
Sep 29, 2009
Files and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
View 2 Replies
View Related
Oct 6, 2008
So I have a laptop without a CD drive and I've done this before so I know it came be done, just can't seem to find the googled page that i found last time with the how to. I want to take the laptop HD out and put it into a USB mobile disk enclosure, then from my desktop in my windows xp RUN command I wanna set the XP CD in the drive to copy all its install files to the blank HD and start the XP installation but NOT RESTART after its done. Then take the HD out of the enclosure, pop it back into the laptop, boot up and have the install do the rest from there.
View 4 Replies
View Related
Nov 29, 2009
I completely reinstalled my Win XP OS and i saved my "necessary" files(music, videos. etc...) to an external hard drive but i accidentally encrypted them and now i have to figure out how to decrypt them so i can copy them to my new OS.
When i try to just uncheck the "Encrypt contents to secure data" box i get the error
View 5 Replies
View Related
Feb 13, 2007
I have an IDE drive housed in an external USB enclosure. When I connect it to my XP Pro (SP2) desktop it is recognised, and I can browse the folders and files. However when I try to copy a large number of files from the drive to a local hard drive on the desktop I get a "resource no longer available" error, and the external drive is no longer visible to the PC. I can then disconnect and reconnect the drive but only get back into the same loop.
View 14 Replies
View Related
Sep 27, 2007
Recommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
View 4 Replies
View Related
Oct 19, 2005
Long story short, I replaced my friend's motherboard in her eMachines computer. I've been told that we'd need a new copy of XP because the new MoBo won't be compatible.The copy we got ended up being the upgrade version.Is it possible to run the upgrade and replace the original XP with this new one?
View 1 Replies
View Related
Sep 4, 2009
I have a Dell Dimension Desktop that became infected with a pretty nasty virus. I have had to remove the infected HD from the machine. Instead of trashing the machine, I would like to just purchase an entirely new HD for this machine. I am guessing that when purchasing a new HD that it does NOT already come with an O/S already installed. If this guess is correct, my question is this:Can I use the original O/S Reinstallation CD that came with the machine to get the O/S installed on the new HD? ORDo I have to purchase the O/S along with the new internal HD? If more information is needed before an answer can be provided, please let me know what is needed.
View 1 Replies
View Related
Apr 1, 2010
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies
View Related
Jan 31, 2008
Today I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
View 6 Replies
View Related
Aug 24, 2008
In addition to my other posting here, I want to ask you professionals, if it is possible to mirror my existing hard drive onto a much larger hard drive?My partition C became way too small over the years, the Windows XP files have blown up their size. Partition D (which contains all installed programs) is still fine. But I was never able to use software like "Partition Magic" to adjust the space between these two partitions.So I might just have to buy a new hard drive. But I want - I even HAVE - to keep the installed XP the way it is now. Lots of software installed. So I wonder, if there is any way just to "mirror" the existing version of XP onto a new hard drive, and then just to exchange the old hard drive with the new one?
View 9 Replies
View Related
Oct 14, 2006
The C drive is used strictly for WinXP OS and applications, of which there are many and they are all very large. While I'm fully expecting this to be a tedious task, I would welcome any advice on how the process can be made less tedious and very safe. Note that the C drive is an 18 GB SCSI-3 supported by an Adaptec U-160 SCSI adapter, which has performed reliably and is very speedy.
View 14 Replies
View Related
Aug 11, 2005
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
View 8 Replies
View Related
May 6, 2006
Features: P4 Dell Laptop, 20GB HD, CD/DVD ROM drive, 3.5 floppy HD, running a Genuine copy of Windows XP Professional SP2, My laptop is really sluggish, I have done everything from defrag through to using reg cleaning utilities and deleting programs i dont need, i was thinking about reformatting my hard drive, however I dont have my original XP Pro cd. Is there a way of keeping my current OS and reformatting my hard drive on my laptop?
View 7 Replies
View Related
Apr 24, 2007
I'm helping a friend whose system went belly up after a power failure. Besides telling him to get a surge protector, we are going to reload Windows and everything else. I pulled his hard drive and put it in an external enclosure so that we can collect his data files on another system. When I try to copy his files Windows tells me "access denied". What do I need to do to have access to copy these files?
View 4 Replies
View Related
Jul 16, 2005
I made some holiday videos and saved them to DVD. They are about 2.1 gigs each. Now I want to edit them I cant copy them to my hard drive. Loads of room but it just comes up with 49 minutes left and keeps going. If I look at the properties of the file on the harddisk it's the right size as if it's been copied. The problem is that it never seems to finish and if I cancel the file disappears.
View 8 Replies
View Related
Jul 11, 2005
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
View 1 Replies
View Related
