In addition to my other posting here, I want to ask you professionals, if it is possible to mirror my existing hard drive onto a much larger hard drive?My partition C became way too small over the years, the Windows XP files have blown up their size. Partition D (which contains all installed programs) is still fine. But I was never able to use software like "Partition Magic" to adjust the space between these two partitions.So I might just have to buy a new hard drive. But I want - I even HAVE - to keep the installed XP the way it is now. Lots of software installed. So I wonder, if there is any way just to "mirror" the existing version of XP onto a new hard drive, and then just to exchange the old hard drive with the new one?
I've got an HP / Compaq notebook where the smart diags indicated a failing hard drive, HP shipped me a replacement drive under warranty and I removed the drive and used a couple of notebook hard drive adapters to hook them up as master and slave on the secondary channel of one of my desktops. I then used Ghost to clone the failing drive to the replacement since I really didn't want to have to reinstall all my applications again. The clone completed without any seeming problems however I haven't been able to get the new drive to boot up, the problem is that I just get a blank screen with a flashing cursor and no boot menu, end of story...
I happen to have a Win XP Pro full version CD and I am able to boot from the CD to the recovery console, I've tried the following: Chkdsk /R - Did find and fix some problem the first time around, but didn't find anything wrong on subsequent runs. Fixboot - ran with no problems but still no go. FixMbr - indicated "This computer appears to have a non-standard or invalid master boot record", no matter how many times I've run this and it says it's rewritten the MBR successfully it still says the same thing. In-place upgrade - I've run an in-place upgrade twice and both times it completes and says the system will reboot and the installation will continue but it still gets stuck on the reboot. Following the two in-place upgrades I've rerun all of the previous steps and I still can't get it to boot, nor do I get any type of error message that indicates what the problem is.
I need to replace my internal hard drive on my Dell Inspiron 6000 laptop. I do not want to copy anything from it. I bought the new hard drive, but I am not sure how or what order to install everything. I have the 'Reinstallation CD MS Win XP Home' from Dell, SP2 & SP3, and the Drivers & Utilities cd 'for reinstalling dell inspiron system software'. Since these are all 'reinstallation' cds, can I use these? Is there a website or other link that you can point me to that may have step by step instructions/pictures of this entire process? I am not doing an actual reinstall, but that's what the cds say. I am installing a NEW hard drive. I'm pretty sure I can get the actual HD in the laptop. It's just a matter of what to do next to get Windows XP on it.
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
I have a second hard drive installed on my computer. Lets call this F:My main hard drive, were I am running WXP SP2, Home Ed., and were my program files are kept. Lets Call this drive C:IP3, 733mhz, 384 mb, HOMEMADE. works well, very happy $5.99 OBO.I am filling up C: and have tons of room on F:. Can I put program files on F:, easily that my computer will recognize and be able to use effectivley and effciently? With out jack-ups? Yes I understand that this an imperfect world, but If I could do what I wish within this situation, I will be closer to.
i have use more than 10 disk of windows xp to format compaq pressario v3000.. when i press enter to format.. it shown that the hard drive is not installed. what should i do sir?
I have a 2nd hard drive installed on my computer and i noticed yesterday that everything on it except for one folder has been deleted everything from my music to my videos. However, when i check the properties of the hard drive it still shows that space is being taken up on that 2nd hard drive as if all my files are still there. I went into my itunes and tried to play the music i have on my 2nd hard drive through itunes and to my surprise it still plays which it shouldn't if the files had in fact been deleted.
installed second hard drive,moved program files from c drive to folder i created in new drive.installed farcry onto new folder.but farcry files where scattered allover & not in folder of its own.uninstalled farcry with program called my uninstaller.pc then froze couldnt get into task manager,so switched off pc.when i restarted,disaster, folder in new drive had gone along with my programs ,mostly games,
Help. I've installed a 2nd hard drive (windows XP). Everything went smoothly, however, when I was prompted to copy all files over to the new drive, I opted not to do so, not realizing that would cause me to not be able to install programs on that drive. Now my new drive is just used for storing music, pictures and movies. Please tell me what I'd need to do so I can install programs on that drive. Thanks
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
Installed new hard drive, along with XP Home (recovery disk).Before my system crashed all my motherboard drivers were on D: partition.XP loads okay, but it is unstable - for example I cannot start msconfig under "Normal" start up. It crashes. I will not list all the BSOD - but XP doesn't like something.I have no devices connected apart from basic graphics card (which XP loaded the drivers for okay). I am waiting for XP Pro to be delivered, so I am hoping that my unstable XP will become stable after I upgrade (or full installation) of a retail version.
Prior to installing my current XP (one time of at least 30 others - as kept crashing),I tried to load my motherboard drivers from the disk my manufacture supplied.is it possible that my XP Home is unstable BECAUSE I do not have my motherboard drivers loaded? That might seem a naive question - but I honestly do not know, and I've started to become a tad paranoid as these problems have been ongoing for 5 weeks.
I just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
The C drive is used strictly for WinXP OS and applications, of which there are many and they are all very large. While I'm fully expecting this to be a tedious task, I would welcome any advice on how the process can be made less tedious and very safe. Note that the C drive is an 18 GB SCSI-3 supported by an Adaptec U-160 SCSI adapter, which has performed reliably and is very speedy.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
My external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
