I have a second hard drive installed on my computer. Lets call this F:My main hard drive, were I am running WXP SP2, Home Ed., and were my program files are kept. Lets Call this drive C:IP3, 733mhz, 384 mb, HOMEMADE. works well, very happy $5.99 OBO.I am filling up C: and have tons of room on F:. Can I put program files on F:, easily that my computer will recognize and be able to use effectivley and effciently? With out jack-ups? Yes I understand that this an imperfect world, but If I could do what I wish within this situation, I will be closer to.
I have a 2nd hard drive installed on my computer and i noticed yesterday that everything on it except for one folder has been deleted everything from my music to my videos. However, when i check the properties of the hard drive it still shows that space is being taken up on that 2nd hard drive as if all my files are still there. I went into my itunes and tried to play the music i have on my 2nd hard drive through itunes and to my surprise it still plays which it shouldn't if the files had in fact been deleted.
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
i have use more than 10 disk of windows xp to format compaq pressario v3000.. when i press enter to format.. it shown that the hard drive is not installed. what should i do sir?
In addition to my other posting here, I want to ask you professionals, if it is possible to mirror my existing hard drive onto a much larger hard drive?My partition C became way too small over the years, the Windows XP files have blown up their size. Partition D (which contains all installed programs) is still fine. But I was never able to use software like "Partition Magic" to adjust the space between these two partitions.So I might just have to buy a new hard drive. But I want - I even HAVE - to keep the installed XP the way it is now. Lots of software installed. So I wonder, if there is any way just to "mirror" the existing version of XP onto a new hard drive, and then just to exchange the old hard drive with the new one?
installed second hard drive,moved program files from c drive to folder i created in new drive.installed farcry onto new folder.but farcry files where scattered allover & not in folder of its own.uninstalled farcry with program called my uninstaller.pc then froze couldnt get into task manager,so switched off pc.when i restarted,disaster, folder in new drive had gone along with my programs ,mostly games,
Help. I've installed a 2nd hard drive (windows XP). Everything went smoothly, however, when I was prompted to copy all files over to the new drive, I opted not to do so, not realizing that would cause me to not be able to install programs on that drive. Now my new drive is just used for storing music, pictures and movies. Please tell me what I'd need to do so I can install programs on that drive. Thanks
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
just installed a second internal hard drive. tried to access bios at start up (to setup hard drive) but system doesn't respond to ANY keyboard keys. system just continues with normal Windows boot-up. once XP is running all functions and software seem fine. no matter how many times I try at "Press Del to enter Setup" nothing works. Jusat before I had this problem, I had a problem with software (which I have removed) that caused my system to lock up. when I rebooted system stopped and offerred reboot options, ea: Safe Mode, but I the arrow keys would not work, system just went directly to Windows boot up.how can I access the bios if system doesn't respond to keyboard?
I just recently installed a new hard drive and uploaded windows xp professional. To my surprise I continue to get this box that pops up and says" Critical error message! Registry damaged and corrupted. To fix this problem: open IE and type www.registryxp.com Once you load the web page, close this message window. After you install the cleaner program you will not recieve any more reminders or pop ups like this one". I went to that page and it wants to charge me to sign up for a registry cleaner. This box pops up every 2 minutes or so . I've tried other registry cleaners and pop up blockers, spyware removal, deleting cookies, add/ remove programs, everything I can think of but to no avail. I know that it's hiding somewhere but I'm not too computer literate to go to far into my system without the proper help.
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
Installed new hard drive, along with XP Home (recovery disk).Before my system crashed all my motherboard drivers were on D: partition.XP loads okay, but it is unstable - for example I cannot start msconfig under "Normal" start up. It crashes. I will not list all the BSOD - but XP doesn't like something.I have no devices connected apart from basic graphics card (which XP loaded the drivers for okay). I am waiting for XP Pro to be delivered, so I am hoping that my unstable XP will become stable after I upgrade (or full installation) of a retail version.
Prior to installing my current XP (one time of at least 30 others - as kept crashing),I tried to load my motherboard drivers from the disk my manufacture supplied.is it possible that my XP Home is unstable BECAUSE I do not have my motherboard drivers loaded? That might seem a naive question - but I honestly do not know, and I've started to become a tad paranoid as these problems have been ongoing for 5 weeks.
I just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
I recently installed a new hard drive into a friends computer and installed XP Home. I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do. I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
I just tried to reformat and install windows XP home edition, and upon coming to the screen of "Repair" or "Install fresh copy" I received an error reporting:Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit setup, press F3.I was trying to use ubuntu but my ram wasn't high enough, so now it won't let me run windows xp again.
I have a major problem with my Packard Bell iMedia D815AW home desktop. Ever since I installed a Lite-On DVD-RW into it, it started making a lot of noise (a bit like the sound of a typewriter tapping) and started crashing. I removed the DVD-RW drive, only for the problem to continue. The computer kept crashing (often showing the blue crash screen, other times showing a black 'insert floppy disk' screen, sometimes just restarting itself). Running the Windows disk check utility at start-up would not work - the computer would freeze while the disk scan occured (I tried many times). I ran disk registery programs (ie- Registry Mechanic, etc), anti-virus software, defragmentation, etc. etc. but the problem remained. Yesterday, I decided I would try reinstalling (or restoring?) Windows XP again (with the intention of fixing the problem without deleting my personal files on the computer). However, upon instertion of the disk, Windows XP claimed it could not reinstall, as the Windows version on my computer was too recent. I assumed that the reason for this was that I had installed Windows XP Serice Pack 2 and so the version was too recent for the installation disk. So, I thought I would uninstall service pack 2 and then try to reinstall Windows XP. However, while uninstalling service pack 2, the computer crashed. Since then, whenever I try to startup Windows, the computer restarts after about 30 seconds of loading. I can enter the startup screen which gives you access to entering through Safe Mode, Debugging, etc - however entering through these modes has the same problem though with the computer restarting before reaching Windows. So, I entered the computer BIOS at startup and changed it to load via CD, inserting the Windows XP disk. I tried to use the 'Recovery Console' option, however the error message "Setup did not find any hard disk drives installed in your computer" showed. It then asked me to restart the computer by hitting F3. I then tried to use the Windows install option by restarting the computer and loading the Windows XP disk, but the same "Setup did not find any hard disk drives installed in your computer" message showed. So, i cant load the computer, nor reinstall the software. I dont want to lose all the files on my computer.
I built a new computer w/ XP Pro. Its has a ASUS P4C800-E Deluxe MB w/ a 3.2 Mhz cpu. with a raptor hard drive. I set it up by installing the raptor alone, after xp was up and running I put the seagate 40gb in. It was running fine, when I took it out to put it back in the old system it was in it would not even start the check of IDE's. If I removed power from the HD it would say no IDE's found. I have award BIOS v4.51pg and when I hit delete I can't enter setup. (?) The only thing new to the old system is another video card (I put the old one in the new computer) I also removed the cd burner and dvd plyer and put it in the new computer, and a old dvd player was put back in the old computer. No setting were changed. I have tried to put the 40 gb back to the new comp and I get an error message w/ options to continue starting windows, start in safe, safe w/ com prompt, etc.
Recently I have not been able to access my hard drive(s) from My Computer. I double click on one of my partitions and the computer does nothing. It doesn't open the drive in order to see the files!! It even doesn't work when I plug in my external USB drive either. It sounds like a windows problem to me. However I can access any disk that I want if I type the corresponding address in the address bar.Do I need to reinstall a driver/services or even XP ?
I have a Dell Dimension 8200 with a Pentium 4, 1.8 GHz. A while back, I installed a new ~75GB hard drive as the secondary drive (slave is the term, right?). Based on the fact that this is a newer drive, and on my own experience using the computer, I'm pretty sure the new drive is a lot faster than the original one. I'd like to make the best use of this additional speed, and was thinking about moving Windows and most of my program files to it. The older, 40GB drive could then be used for backup/archives.I've done some initial searches, both here and on MS's knowledge base, but couldn't find instructions for doing what I want to do. Also review www.michaelstevenstech.com, found the Move XP section, but still didn't seem like an exact match.
I recently bought Fantom Drives 1Tb external hard drive, Model # GF 1000EU. After about a year all computers would stop recognizing the external hard drive. My computers would know it was connected but I would not see it under "My computer." I read through hundreds of forums trying to fix the problem. When nothing worked I decided to take apart the enclosure and remove the hard drive so I could connect it to my desktop pc using a SATA cable. Essentially, I have two hard drives connected to my computer and I want to use one as an external hard drive so I am able to access data from it while still running my computer off of it's original hard drive. Is this possible?
I am dying to delete everything on my hdrive and compltely rebuild my computer. Am lookin for a quick answer cause am getting like 10 pop ups a minute and its recking my head lol, that and i have so much junk on my computer this formating is well overdue.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
I had to replace my harddrive on my Acer Travelmate 2480. After running the system restore discs my computer is in French. How do I put it back in English?
I just did a partial run of BCwipe, just 2 scans, because I had to shut the computer down and now my hard drive is full!! Before using BCwipe, I had at least half of the drive free. What happend and what can I do now?
Every 3-4days my computer would freeze up while booting up at windows XP screen and scroll bars would freeze.What bohers me about this is i am sure what could be causing this. I use avg as my antivirus,and run A2, spybot,regcleaner, tweaknow on a weekly basis. I keep my system really clean, so now i am wondering is it my HD. PC: Win XP-PRO, 800MHZ AMD Athlon, 1024mb,80gHD. I did what cleaning i could in safemode, it still freeze on scroll bars. I tried last good config, result is the same. The last time i got pass the freezing was by doing a restore.
I have a gateway running windows xp. I had a virus and ran mcafee. It told me to reboot so I did and now nothing happens. hte gateway screen comes up and nothing after that it just stays on the gateway screen. I can't enter safe mode and it will not read my recovery disk. I called gateway and they told me that because my computer is out of the warranty, they would be happy to help me and then gave me three payment options. I have come to grips that I will need to format the hard drive, but I just don't know how to get it to that point. the only thing that happens is the gateway screen and the fan runs really loud.
I have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
i just took my old hard drive out of my old computer and put in my new comp, but the user profile i was using in old HD is now locked and windows says i have no access to this folder? How can i gain acess to all my files out of this folder now through my new xp?
I recently got a new PC and stuck my old hard drive in. I can now open all my files except the ones under Documents and Settings. Access is denied comes up when i try to do anything with them. I tried the windows help, and it told me to go to the Security tab under options and take ownership, but there is no Security tab. What do I do? (Running XP Media Center, Old hard drive is set to D:)
