I built a new computer w/ XP Pro. Its has a ASUS P4C800-E Deluxe MB w/ a 3.2 Mhz cpu. with a raptor hard drive. I set it up by installing the raptor alone, after xp was up and running I put the seagate 40gb in. It was running fine, when I took it out to put it back in the old system it was in it would not even start the check of IDE's. If I removed power from the HD it would say no IDE's found. I have award BIOS v4.51pg and when I hit delete I can't enter setup. (?) The only thing new to the old system is another video card (I put the old one in the new computer) I also removed the cd burner and dvd plyer and put it in the new computer, and a old dvd player was put back in the old computer. No setting were changed. I have tried to put the 40 gb back to the new comp and I get an error message w/ options to continue starting windows, start in safe, safe w/ com prompt, etc.
I have a Dell Dimension 8200 with a Pentium 4, 1.8 GHz. A while back, I installed a new ~75GB hard drive as the secondary drive (slave is the term, right?). Based on the fact that this is a newer drive, and on my own experience using the computer, I'm pretty sure the new drive is a lot faster than the original one. I'd like to make the best use of this additional speed, and was thinking about moving Windows and most of my program files to it. The older, 40GB drive could then be used for backup/archives.I've done some initial searches, both here and on MS's knowledge base, but couldn't find instructions for doing what I want to do. Also review www.michaelstevenstech.com, found the Move XP section, but still didn't seem like an exact match.
I have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
I am running Windows XP on my PC. I have two WD hard drives. My C: drive is getting full (on my master drive). I have now an empty D: drive on my slave drive (I used to store my documents there, which I now moved to an external drive). Now I want to move everything from my C: drive to my D: drive. I know how to switch the jumbers so that the slave drive becomes the new master drive. But how do I move the system, files, everything, so that the System boots from current D: Drive (which will become the new C: drive). I do not want to reinstall everything anew, so I am not looking for a clean install, just a move of everything from C: to D:
I am trying to avoid reinstalling XP after moving to new hardware. I had SP2 installed and when I try to use the old XP CD SP0. some programs were not working and Windows update was not working and alot of other problems.
My main pair of raid drives crashed and burned. So I installed XP on my second pair of raided disks and recovered the data from the first pair. But now my boot/o-s disk is D and my drive is C.Any tools I can use to change drive letters around and move boot information and such automatically?
Let me be clear on this: I want to put in a larger drive than the old one, have Windows completely move itself to the new drive, and leave the old one blank - all without Windows' security hackles raising and saying, hey you changed something so you need to re-activate(I don't want to clone. I've done this and Windows has been a POS about it. I want to MOVE the installation.)Perhaps someone has some secret information that this is in fact possible?
I have 3 hard drives in my pc, and have been trying to move files and folders from one location to another. I do a Cut/Paste and XP starts to move my folders, showing that it will take say, 1 hour to complete.I come back an hour later and find that after a few files have been moved, the process paused because it ran into some "Read Only" or ".exe" file and it asks me if I really want to move it. This happens almost every time I move a bunch of folders.Is there some way to tell XP when you try to "Cut/Paste" not to keep stopping and asking if you really want to move certain of the files?
Recently I have not been able to access my hard drive(s) from My Computer. I double click on one of my partitions and the computer does nothing. It doesn't open the drive in order to see the files!! It even doesn't work when I plug in my external USB drive either. It sounds like a windows problem to me. However I can access any disk that I want if I type the corresponding address in the address bar.Do I need to reinstall a driver/services or even XP ?
I recently bought Fantom Drives 1Tb external hard drive, Model # GF 1000EU. After about a year all computers would stop recognizing the external hard drive. My computers would know it was connected but I would not see it under "My computer." I read through hundreds of forums trying to fix the problem. When nothing worked I decided to take apart the enclosure and remove the hard drive so I could connect it to my desktop pc using a SATA cable. Essentially, I have two hard drives connected to my computer and I want to use one as an external hard drive so I am able to access data from it while still running my computer off of it's original hard drive. Is this possible?
I have a second hard drive installed on my computer. Lets call this F:My main hard drive, were I am running WXP SP2, Home Ed., and were my program files are kept. Lets Call this drive C:IP3, 733mhz, 384 mb, HOMEMADE. works well, very happy $5.99 OBO.I am filling up C: and have tons of room on F:. Can I put program files on F:, easily that my computer will recognize and be able to use effectivley and effciently? With out jack-ups? Yes I understand that this an imperfect world, but If I could do what I wish within this situation, I will be closer to.
I am dying to delete everything on my hdrive and compltely rebuild my computer. Am lookin for a quick answer cause am getting like 10 pop ups a minute and its recking my head lol, that and i have so much junk on my computer this formating is well overdue.
I have a 2nd hard drive installed on my computer and i noticed yesterday that everything on it except for one folder has been deleted everything from my music to my videos. However, when i check the properties of the hard drive it still shows that space is being taken up on that 2nd hard drive as if all my files are still there. I went into my itunes and tried to play the music i have on my 2nd hard drive through itunes and to my surprise it still plays which it shouldn't if the files had in fact been deleted.
i am try 2 put things on 2 a usb device but it keeps coming up say this can not copy the disk is write protected remove the write protection is there anyway i can fix this thanks
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
I had to replace my harddrive on my Acer Travelmate 2480. After running the system restore discs my computer is in French. How do I put it back in English?
I just did a partial run of BCwipe, just 2 scans, because I had to shut the computer down and now my hard drive is full!! Before using BCwipe, I had at least half of the drive free. What happend and what can I do now?
Every 3-4days my computer would freeze up while booting up at windows XP screen and scroll bars would freeze.What bohers me about this is i am sure what could be causing this. I use avg as my antivirus,and run A2, spybot,regcleaner, tweaknow on a weekly basis. I keep my system really clean, so now i am wondering is it my HD. PC: Win XP-PRO, 800MHZ AMD Athlon, 1024mb,80gHD. I did what cleaning i could in safemode, it still freeze on scroll bars. I tried last good config, result is the same. The last time i got pass the freezing was by doing a restore.
I have a gateway running windows xp. I had a virus and ran mcafee. It told me to reboot so I did and now nothing happens. hte gateway screen comes up and nothing after that it just stays on the gateway screen. I can't enter safe mode and it will not read my recovery disk. I called gateway and they told me that because my computer is out of the warranty, they would be happy to help me and then gave me three payment options. I have come to grips that I will need to format the hard drive, but I just don't know how to get it to that point. the only thing that happens is the gateway screen and the fan runs really loud.
i just took my old hard drive out of my old computer and put in my new comp, but the user profile i was using in old HD is now locked and windows says i have no access to this folder? How can i gain acess to all my files out of this folder now through my new xp?
I recently got a new PC and stuck my old hard drive in. I can now open all my files except the ones under Documents and Settings. Access is denied comes up when i try to do anything with them. I tried the windows help, and it told me to go to the Security tab under options and take ownership, but there is no Security tab. What do I do? (Running XP Media Center, Old hard drive is set to D:)
My friend has a laptop, and the power supply went on it. He gave me his hard drive, so I can back up his data. I removed the hard drive in my laptop, and installed his. When I boot I get a blue screen that says remove any newly installed hard drive or controllers. I cant get windows to boot, so that I can backup the data.
i was wondering if i take my computer harddrive and put it in a usb case to make it a usb hard drive would i beable to then take my portable hard drive to anycomputer and boot my windows xp off of it?
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
I just got back from vacation and my computer wont boot up. When i turn it on, i get a black screen and it says "strike f1 for retry boot, f2 for setup utility" I am using a Dell Dimension 2400, which is only two years old. I pressed F8 to try going into safe mode and it says keyboard failure. I then tried reinstalling windows xp, while installing i got a bluce screen with a long message on it saying there was a problem with the setupdd.sys file.I dont know what else to do. Is the hard drive gone?
I am going to upgrade my Personal Computer, my current Personal Computer is old and i am thinking of replacing the Hard Drive, the thing is that my current Hard Drive has XP on it and i was supplied no disk. My current Personal Computer Does not support 2 Hard Disk so i cannot back up, so what can i do, is there a way i can make a XP disk from the XP files on my Personal Computer?
Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.
I am using XP on my laptop,tried to boot up my computer and it was extremely extremely slow. Took maybe 15-20 minutes to get started.When the desktop finally came up, it was in a bad resolution. The cursor would move fine, but if i tried to click on anything it would pretty much completely freeze up.Id maybe be able to minimize a window, but no program would open at all.I don't really know what to do since it is pretty much impossible to do anything on the computer.I checked my hard drive in the computer BIOS and it didn't report any problems.Not really sure what my next step should be.I have a lot of information on my computer that i really can't lose, but don't really know how to back anything up at this point.What can i do?
I have caught a virus and my computer constantly freezes!! I have lost my windows XP CD but is there anyway I can delete everything but what came with windows?
