I am trying to avoid reinstalling XP after moving to new hardware. I had SP2 installed and when I try to use the old XP CD SP0. some programs were not working and Windows update was not working and alot of other
problems.
I am running Windows XP on my PC. I have two WD hard drives. My C: drive is getting full (on my master drive). I have now an empty D: drive on my slave drive (I used to store my documents there, which I now moved to an external drive). Now I want to move everything from my C: drive to my D: drive. I know how to switch the jumbers so that the slave drive becomes the new master drive. But how do I move the system, files, everything, so that the System boots from current D: Drive (which will become the new C: drive). I do not want to reinstall everything anew, so I am not looking for a clean install, just a move of everything from C: to D:
View 5 Replies View RelatedI built a new computer w/ XP Pro. Its has a ASUS P4C800-E Deluxe MB w/ a 3.2 Mhz cpu. with a raptor hard drive. I set it up by installing the raptor alone, after xp was up and running I put the seagate 40gb in. It was running fine, when I took it out to put it back in the old system it was in it would not even start the check of IDE's. If I removed power from the HD it would say no IDE's found. I have award BIOS v4.51pg and when I hit delete I can't enter setup. (?) The only thing new to the old system is another video card (I put the old one in the new computer) I also removed the cd burner and dvd plyer and put it in the new computer, and a old dvd player was put back in the old computer. No setting were changed. I have tried to put the 40 gb back to the new comp and I get an error message w/ options to continue starting windows, start in safe, safe w/ com prompt, etc.
View 8 Replies View RelatedI have a Dell Dimension 8200 with a Pentium 4, 1.8 GHz. A while back, I installed a new ~75GB hard drive as the secondary drive (slave is the term, right?). Based on the fact that this is a newer drive, and on my own experience using the computer, I'm pretty sure the new drive is a lot faster than the original one. I'd like to make the best use of this additional speed, and was thinking about moving Windows and most of my program files to it. The older, 40GB drive could then be used for backup/archives.I've done some initial searches, both here and on MS's knowledge base, but couldn't find instructions for doing what I want to do. Also review www.michaelstevenstech.com, found the Move XP section, but still didn't seem like an exact match.
View 3 Replies View RelatedI have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
View 4 Replies View RelatedI turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have just reinstalled XP Pro. I have a SATA hard drive and have to install drivers during install. I didn't install the drivers this time assuming they would still be in the system. Ever since XP thinks the hard drive is a removable drive. I tried reinstalling again but nothing.
View 3 Replies View RelatedJust want to upgrade from an 80 gig hard drive to something in the 250-500 gig range, and I would like to clone my existing drive with operating system directly to the new drive. Is it possible with freeware? I'll then format the old drive and use it as the slave.
View 8 Replies View RelatedI have an HP pavillion xf328 laptop and of late it refuses to boot.I could not sart it in safe mode or any of the other choices offered at stert-up. I finally got tire of it just repeatedly cycling through the first part of the boot cycle so I got out my power max floppy and reformatted the HD. Then I reinstalled XP pro. It worked fine for several start-ups and now just goes to a blue screen. Is hp somehow proprietary on how I have to 'restore' the system?
View 2 Replies View RelatedI'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
Without going into too much detail. My hard drive has XP O/S on it. All I want to do is to format it. NTFS. So I have a clean hard drive with no operating system on it. How can
I do it?
Windows XP, that is. Well, if I am not completely mistaken, hard drives do not need any drivers to work. Right? I mean, I bought a new HDD (Samsung HD753LJ) and I can see it, use it and all... But Windows STILL asks me to install it (you know, the "new device found"-thing) every time I restart my PC. I've told it to "don't ask to install this device again"
View 6 Replies View RelatedI have an 8 month old Dell xp system and have just caught something nasty. I cant do a sytem restore, dl/run any software tools, and its so slow that the system is pretty much useless. Dell says that they think it is spyware and they can fix me right up for just $49.95. I think I have everything I need backed up, so I was thinking about wiping my hard drive and starting over for free. Could someone walk me through it? Then, could someone point me in the right direction to keep this from happening again.
View 14 Replies View RelatedPer "My Computer", the drives are: C:= 200 gig, File: system NTSF. D:= 8.5gig (A partition on the C Drive, it contains HP_Recovery), File: system FAT32. E:= LightScribe DVD/CD Burner/Player, F:= My "Back-up" HD, 160 gig, Seagate Ultra ATA/100, File: system NTSF. G, H, I & J are available for future use.
I backed up all my files etc. from my old PC (Windows Me upgraded to XP) onto the 160 gig HD. The "Back-up" HD was the slave in my old PC. It contains Files etc. there is no Operating System on it.
After installing the "Back-up" HD in the new PC I get an "Error loading OS" message when I boot-up. If I turn off the PC, wait 60 seconds and then turn it on it loads OK and yes I can access the 2nd HD, copy files and paste them into the new 200 gig HD etc.
My spare hard drive I believe has been acting up. Now suddenly the drive is there but I can't view anything on it. Did diagnostics and it checks out, spins up, but somehow the file directory got corrupt? it's a WD 120. Would using the Recovery console be the best option to repair that file system? I am unable to do a scandisk/Chkdsk from DOS or within XP. I have some video files I'd hate to loose to reformating that drive to repair it.
View 7 Replies View RelatedI was using Windows XP Prof on my PC, and was supplied with a Recovery CDfor Windows along with my PC, and the Hard Drive crashed, Now i wish toinstall Windows on a new Hard Drive, but the CD is a recover CD.How do i install Windows to new Hard Drive without encountering the problem of CD Key already being registered
View 7 Replies View Relatedi need to knwo what it is wrong , my operating system will NOT work with my new 80 gb hard drive and i dotn know why , when it reboots from the system install then says"error loading operating system" ive tried a few things but im looking for more ideas, if you have any clue what it could be please reply, it cant be my memory cuz i have 384 mb ram
View 14 Replies View RelatedAt first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
View 3 Replies View RelatedMy USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
View 1 Replies View Relatedhow to reformat my hard drive and re-install the operating system.
View 1 Replies View RelatedI have a 60 gig hard drive and after i did a system recovery i only had 12 gigs free on the hard drive
View 3 Replies View RelatedI have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I have just installed a new Seagate SATA 200GB hard drive (ST3200822AS) and partitioned and formatted it with Partition Magic 8.0 into 3 separate logical
partitions. The partitions have a cluster size of 8K and are under the NTFS 3.1 (Windows XP) file system.
I took a hard drive out of another computer and put it into my computer to fix it. (I have my reasons for doing that) i hooked up the hard drive and when i turned on my computer, it loads the screen(the screen where it shows the master, slave, etc.). Then it loads the screen about boot from CD, and then it stops It stays at that screen and doesnt load windows.
View 3 Replies View RelatedThis is not the usual thread where you "forgot" your password or what not. I was trying to remove the login screen on windows by deleting a few accounts of mine, just to discover that the login screen is still there, only difference is now the username is "administrator" of which I have no clue what the password is.. SO. I tried a bunch of things such as booting from a password cracking image file, with no success (says disk is "dirty") and now I'm thinking that if I booted with a different hard drive and put my original drive in an enclosure I should be able to get into it and make some changes to fix this problem, by maybe erasing or resetting the password.. right?
View 3 Replies View RelatedI have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies View RelatedI want to back up my entire system to an external harddrive and then reinstall windows on the internal one.My question is can I use a program to put programs back on to the internal drive from the external harddrive. I heard ghost copies everything even registry is this true?
View 10 Replies View RelatedI want to reload XP PRO, clean the haed drive and give him a fresh start, yet it tells me that I have an earlier version and will not let me install it. It says to reboot and start using my XP Pro and it still does not work. I have checked the BIOS and everything is right in it, i.e boot from CD. I for the life of me cannot format this drive so I can reload a fresh copy of XP PRO and all the updates, and then some other programs. I am pulling my hair out over this. What am I missing that I cannot format and start over,
View 6 Replies View RelatedRecently I opened up my computer to take the dust out of it as I have before. I hadent done so in a long time so there was some caked on dust on some components. I took the RAM out an cleaned it, re-installed it. I also took my vidoe card out because the heat sink had been cloged with dust aswell. After putting everything back and restarting my computer I recived this msg before windows start up. Windows could not start because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEMand it followed with instruction to use the xp setup disk to repair the problem. so I threw the windows CD in, and tried to repair however the program tells me I have no hard drive installed. Which I do since my computer is 3 years old now and has been working fine. I hadent changed any bios settings, I never disconnected the hard dirve either.
A Dell Inspiron 8600. A couple of days ago, I formatted the hard drive and installed WinXP SP2. It then ran very slow. I then checked System Properties and it said I was only using 251 MHz of 1400 MHz. I then installed the software called Speed Switch XP, and it got it boosted up to 599 MHz when it's on max performance. I'm now stuck there.
View 11 Replies View RelatedAbout a month ago I decided to get a much bigger hard drive (500GB) but theres no way I have time to reinstall everything so I decided to clone my existing hard drive, I tried acronis and the clone went superfast and put everything onto a single partition the full size of the new disk - when I tried to boot up with the disk, it didnt boot. It got to the pale blue screen that usually says 'welcome' but instead it had a small windows XP logo and that was it, it didnt go any further. I contacted support and they were no help so last night I tried another free software hdclone - it took about 6 hours but I actually managed to boot up from the new disk - but the new drive had a single partition the exact same size as the old one and the rest was unused space - no problem
View 10 Replies View Related
