Per "My Computer", the drives are: C:= 200 gig, File: system NTSF. D:= 8.5gig (A partition on the C Drive, it contains HP_Recovery), File: system FAT32. E:= LightScribe DVD/CD Burner/Player, F:= My "Back-up" HD, 160 gig, Seagate Ultra ATA/100, File: system NTSF. G, H, I & J are available for future use.
I backed up all my files etc. from my old PC (Windows Me upgraded to XP) onto the 160 gig HD. The "Back-up" HD was the slave in my old PC. It contains Files etc. there is no Operating System on it.
After installing the "Back-up" HD in the new PC I get an "Error loading OS" message when I boot-up. If I turn off the PC, wait 60 seconds and then turn it on it loads OK and yes I can access the 2nd HD, copy files and paste them into the new 200 gig HD etc.
When I bought my new pc with XP SP2 I added a second hard drive(FAT 32) that I'd already used for a while in my old pc, and that contains all my data, photo's, music etc. Everything worked fine, but over the past month something strange is happening. From one moment to the other Windows loses sight of that second drive. Sometimes restarting (in every possible way) helps, sometimes not. Sometimes the drive disappears when I'm saving omething to it, sometimes I can save.
Just want to upgrade from an 80 gig hard drive to something in the 250-500 gig range, and I would like to clone my existing drive with operating system directly to the new drive. Is it possible with freeware? I'll then format the old drive and use it as the slave.
Without going into too much detail. My hard drive has XP O/S on it. All I want to do is to format it. NTFS. So I have a clean hard drive with no operating system on it. How can I do it?
I was using Windows XP Prof on my PC, and was supplied with a Recovery CDfor Windows along with my PC, and the Hard Drive crashed, Now i wish toinstall Windows on a new Hard Drive, but the CD is a recover CD.How do i install Windows to new Hard Drive without encountering the problem of CD Key already being registered
I took a hard drive out of another computer and put it into my computer to fix it. (I have my reasons for doing that) i hooked up the hard drive and when i turned on my computer, it loads the screen(the screen where it shows the master, slave, etc.). Then it loads the screen about boot from CD, and then it stops It stays at that screen and doesnt load windows.
I want to reload XP PRO, clean the haed drive and give him a fresh start, yet it tells me that I have an earlier version and will not let me install it. It says to reboot and start using my XP Pro and it still does not work. I have checked the BIOS and everything is right in it, i.e boot from CD. I for the life of me cannot format this drive so I can reload a fresh copy of XP PRO and all the updates, and then some other programs. I am pulling my hair out over this. What am I missing that I cannot format and start over,
I had a hard drive failure, and have a full copy of the hard disk which contains the operating system. However, when I copy this in its entirety to a new hard drive, that hard drive does not boot.
The bios just states "No Operating System".
Is it actually possible to do what I am trying to do? That is, to reinstate the operating system from a backup CD?
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
Thinkpad T41 with a OEM xp pro installed. This laptop is no longer usable, I would like to take the hard drive installed and install in another T41 with similiar configuration. I would assume XP will recognize the new laptop and cause problems.
I was installing my scanner onto XP and when I plugged in the usb it didn't like that port .. .. so it created an "E" drive to my computer. I was told there was an error occured and when I switched usb ports all worked fine, but,
how do I get rid of the "incorrect E drive" that was created?
Should I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
I have xp sp2 installed on a 17 GB partition. c: properties says I have used 9.8GB and7Gb free. I have 9 folders and a few tiny files on C: and very few programs installed.If I add the sizes of 9 folders (Windows-3.09 GB Program files-1GB) I only get about 5GB.What or where might the other 4 GB be?
Hello Friends,I have problem regarding my hard disk!I have 2 hard disk's. 160gb segate barracuda (SATA) & 80gb segate barracuda (SATA).I was having windows vista. My computer was running smoothly that time with 2 hard disk's.I formatted my PC and installed windows xp.While installing windows xp i didn't connect my 80Gb hard disk.But after installation, when i tried to connect it , my computer started hanging.160Gb is my primary hdd and 80gb is secondary hard disk.I never had any OS on 80Gb. My computer hangs at windows xp boot screen.I tried at my friend's place also... tried all jumper settings also but no use. What could be the problem?
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
I have Vista,I have another drive,but it's currently not available to use.What I want to do is to get a Cruzer Micro 2GB,and format it to have a bootup for Windows XP. Would it permanently damage the flash drive in any way?
i stuck the cd in and followed the prompt to do a clean install. after the whole process i noticed that it was installed on the d: partition of my harddrive and not on the c: the original win2000 is still installed on the c: drive. how do i remove the original from the c: drive and move the d: to the c: because the c: drive has a larger partition.
i got 2 installed versions of XP and one is on my D: drive which is my recovery drive and i need to uninstall that version i know how to do it from the control panel but the problem is i cant log on it its not activated and i don't have the product key anymore but im on the other version installed and it works fine i don't know if there is a way to access the d: drive from command prompt and do it that way or what or the recovery console perhaps
I have tried using my Upgrade Disk to install it on my new disk, but it didn't work right. It added a menu during start up to include a second Operating System choice but it wouldn't load. I removed it from my new drive in order to start over, but now that stupid menu choice is still there.First, how do I remove that? Second, how do I go about Transferring my Operating system to my new drive without buying a New Operating System?
Trying to use the system recover cd.to try and repair windows xp pro. I get to the part where the screen is supposed to offer repair.My screen comes up showing partitions on the drive.It also says unknown disk but it lists the c: drive with 76246 MB and two other partitions.It just gives me the option to setup windows xp on the selected item or to select a different partition or delete a partition.I'm not getting the screen shown in the sticky.When i hit enter on the large partition it warned about installing two Operating System on the drive.Afraid to go farther,hoping I can save the files on the hard drive.
I want to archive some files to CD in order to save HDD space, and decided to use the Windows XP facility to do this. When I insert a blank disc in the CD-RW drive (E:) nothing happens - no drop-down menu appears to ask what I want to do. (I'm told I should get a drop-down menu asking what function I wish to perform). If I try to access the drive via Windows Explorer (I also have a DVD-RW drive F:), I get an error message "E: inaccessible". What do I have to do to get Windows to recognise, and use, this drive, please? To use the facility, if available, seems so simple, which would speed up the archiving process.
I was about to reformat my C: (that has an nonworking windows partition) from my current partition D:. I went to my Computer D Management and it said that my C: was a primary partition [green] while my current one was a logic partition blue.boxed in green. Someone at Yahoo! Answers said not reformat the C: because it would screw up my D; Drive. Is it safe? What should I do? I just wish to use my C drive for data storage and my D drive as a Windows partition.
I have a 250 GB hard drive. I put 30 GB for my C, and the rest in D. That's not enough room for C. I have about a GB left. I removed the partition for D, which is now, not in C, but "unallocated." Sheeet! That's not what I intended. I have both C and D already backed up, but surely there must be some way to increase the size of C.How do I go about enlarging C?
MY Operating System is XP Pro with C to G hard disk partitions.I formatted G drive for install second Operating System.C drive file system is NTFS.Other drives FAT32.Can I install second Operating System without formatting C drive.
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I have just reinstalled XP Pro. I have a SATA hard drive and have to install drivers during install. I didn't install the drivers this time assuming they would still be in the system. Ever since XP thinks the hard drive is a removable drive. I tried reinstalling again but nothing.
