Cloned Hard Drive - Managed To Boot System
May 11, 2007
About a month ago I decided to get a much bigger hard drive (500GB) but theres no way I have time to reinstall everything so I decided to clone my existing hard drive, I tried acronis and the clone went superfast and put everything onto a single partition the full size of the new disk - when I tried to boot up with the disk, it didnt boot. It got to the pale blue screen that usually says 'welcome' but instead it had a small windows XP logo and that was it, it didnt go any further. I contacted support and they were no help so last night I tried another free software hdclone - it took about 6 hours but I actually managed to boot up from the new disk - but the new drive had a single partition the exact same size as the old one and the rest was unused space - no problem
View 10 Replies
ADVERTISEMENT
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
May 12, 2007
I just just purchased a 100 Gb drive and cloned my old 60Gb with the 2 partitions into it. I swapped the 2, but windows doesnt boot properly. I can see the windows logo, and the blue screen with the second windows logo (the one right before asking you for username and password) and it just gets stuck there. Whats wrong with it? I read in a thread that the drive letters make a difference. Should I name my new operating system partition c? Can you please help? I use windows xp home edition.!
View 9 Replies
View Related
Jul 2, 2005
Too much junk in my Hard Disk and registry so I did a complete new install of WindowsXP Home. As I was doing this and then installing all of my software I had not realized that my flash drive was plugged in and WinXP then named my Hard Disk drive F: So everything is now on drive F: and working well. In the new install, XP created my Hard Disk NTFS. Now, I used ghost to clone my Hard Disk. XP called the backup drive C: Backup finished fine, BUT, when I switch drives and put the backup in only, the computer will not boot up. I get to the blue Welcome screen and that is where is sits. I tried the ghost GhReboot.exe program, but no help.
View 9 Replies
View Related
Feb 22, 2007
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies
View Related
Dec 16, 2004
He has managed to get an infected program. the OS has crashed to the point it will no longer enter window. The laptop still works fine only no OS I am going to wipe the hard drive and reinstall the OS unless anyone has any better ideas. We do have a Ghost image to backup from.
View 5 Replies
View Related
Dec 29, 2006
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
Jul 13, 2005
Alright so fist of all i am runnig XP SP2.
Second of all my real problem is whenever i try to run programs like WinRar or Mozilla Firefox i always got this error saying Program too big to fit Memory.
So first i tried this:
Right click on My Computer > properties > advanced tab > Performance - settings button > Advanced tab > Virtual memory - change button > put a dot in "System managed size" hit "set" button - OK and re-boot.
View 6 Replies
View Related
Jul 15, 2009
I used HDClone to clone a 10 GB to a 40 GB disk. The program is very simple dealing with Source and Target, bit to bit copy. I left the option bit to bit copy unchecked in order to leave the recommended setting.After finishing this I connected the cloned drive to the master connector and removed the original disk from the system. I already thought it wouldn't let me boot to XP because it's a different disk. After the error I restarted booting the XP-Disk. I tried repairing using bootcfg /add. It found the Windows installation and I could add it. But after the restart, same again:Error loading operating system.So, what could be the reason. Partition not set to active? MBR? Should I make a bit to bit copy?
View 1 Replies
View Related
Sep 19, 2007
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies
View Related
Sep 18, 2006
A friend of mine's computer has three hard drives. The one designated as her C drive is an 8gb thing. She has a 40gb drive along with another 30gb one. In her cmos setup I couldn't get it to boot with a drive besides that which was designated C So can I just copy and paste all the stuff in her C drive into another drive but how would I get windows to boot off of that drive instead??? She has XP home
View 3 Replies
View Related
Sep 7, 2007
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies
View Related
Sep 26, 2005
I need to reinstall the OS on the hard drive, but I have to try and get some files off of it first or can I install new OS over the old one without a loss of my files?
View 5 Replies
View Related
Feb 15, 2005
On my first attempt to boot, the hard drive is not detecte On the second attempt, the bios always sees the hard drive and boot up is normal.I have tested the Seagate hard drive with the Seagate hard drive support tool and all is error free.This is consistent. I can't find anything in the bios where this would be switchable.
Boot up order is:1. DVD drive 2. Floppy drive 3. Hard drive Sony Vaio PCV-RZ22G.Windows XP Home. P4-2.4 1 gig ram.
View 5 Replies
View Related
Nov 28, 2006
I have two HDs installed on my comp. The master (C drive) is running WinXP home edition. The slave (E drive) was taken from my old comp which ran under Win ME (which should still be installed on it). I need to boot up with ME as a "work around" to print some files using a RIP program that is not supported by XP.Is it possible to boot from the slave HD? I looked under the setup options accessed by hitting f12 key during start up, and the "E" drive did not show up on the list of drives. Floppy, Cd drives, and a USB external drive did show up. I also tried looking under a menu accessed by hitting the f2 key...and a second hard drive showed up in that menu, but the options I had available were "off" (the setting I found it set at) or "auto", I changed it to "auto" and tried to reboot but it said "no loader_"
View 13 Replies
View Related
Sep 17, 2007
I have a Compaq SR-1200NX system that came with a 40gb drive. It was too small for all my music and apps so I installed a second drive which I then started using for files.So Drive 1 was 40 gb and Drive 2 was 80GB..I was running out of space again so I used a drive cloner to move the 40 GB drive to a 200GB Drive.Disk Management shows different according to it Drive 0 is the 80gb drive and is assigned a letter of D and Drive 1 is the 200GB drive assigned a letter of C.Both C and D have a Windows directory off of and a Program Files but the Program Files on C has more entries than the one on D.
View 2 Replies
View Related
Aug 3, 2005
Manufacturers get preinstalled WindowsXP on their harddrives? How does one build a similar environment on a blank harddrive? I've looked everywhere for some discussion about this, but can't find anything useful. I've read about WinPE and Bart'sPE and so much more, but noone seems to have a summary of how one goes about initializing a hard drive to boot and start an install of WindowsXP.
View 5 Replies
View Related
Feb 22, 2007
Anyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
View 7 Replies
View Related
Dec 28, 2008
I recently purchased a used IBM Thinkpad r31 2656 with Windows XP Pro Edition installed. I do not have the system CD.This machine came with a 20 GB hard drive and I wanted to upgrade to a larger 160 GB drive. I purchased a Western Digital Scorpio EIDE drive, formatted it using Disk Management into 2 partitions, E: (140 GB) and F: (approx 20 GB) and copied the contents of the original 20GB drive using Norton Ghost onto partition E: without incident.I removed the old drive and replaced it with the new one. Upon startup, I get the IBM Thinkpad screen with the BIOS F1 and F12 messages at the bottom of the screen, and then the screen goes black with a blinking cursor in the upper left corner. This is as far as it goes.
View 8 Replies
View Related
May 15, 2007
have tried 1.6ghz 512mb xp pro sp2 and 1.2ghz 512mb memory 256mb graphics memory xp home sp2 drive is 250gb maxtor. the situation is if i have it in my external HDD enclosure it assigns a drive letter but i get " the device is not ready" error if i attempt to access it and if i put in my main computer as a slave drive it is detected during boot but not in windows.can anyone help me i tried deleteing the driver and having windows redetect but no luck.it might be unrelated but delayed write failure keep happening on g:/$mft and g:/$bmp.
View 19 Replies
View Related
Aug 16, 2008
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
View 14 Replies
View Related
Dec 12, 2008
Suddenly yesterday, my laptop would not boot into Windows.. runs windows xp normally.It would also not boot into safe mode.I took the hard drive out and took it to a colleagues office to get the data off with an external hd connector.He advised that my partition table had been damaged, and the data was not accessible via normal means.Wants to charge $150.00 to get the data off. At this stage, I am wanting to make sure I get my data back, so I authorized this but I am wondering, if anyone can speak to what might have caused this to happen.I do not remember installing any programs or doing anything subject prior to this occurring..
View 14 Replies
View Related
Feb 23, 2009
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
View 2 Replies
View Related
Dec 23, 2005
I have just reinstalled XP Pro. I have a SATA hard drive and have to install drivers during install. I didn't install the drivers this time assuming they would still be in the system. Ever since XP thinks the hard drive is a removable drive. I tried reinstalling again but nothing.
View 3 Replies
View Related
May 27, 2008
Just want to upgrade from an 80 gig hard drive to something in the 250-500 gig range, and I would like to clone my existing drive with operating system directly to the new drive. Is it possible with freeware? I'll then format the old drive and use it as the slave.
View 8 Replies
View Related
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
View 10 Replies
View Related
Jan 5, 2005
I have tried replacing the power supply-no change.I've tried unhooking cd-rom, floppy, replace ram & everything remains unchanged.Bios never recognizes a hard drive. I've tried several known good hard drives and the original hard drive works in another machine. It starts POST & I get HP splash then back to NO OPERATING SYSTEM FOUND, It doesn't find the CD rom drive either. What might this be related to? I've replace hard drive cable, floppy cable. The only cable I haven't replaced it the cd-rom drive.
The hard drive works as a slave in another computer. I am running virus scan and spyware on. But, why won't it work in the other computer? I'm thinking its somehow related to the bios and the fact that it cannot see the drive in the bios. I don't find anywhere in this particular bios where I can try to auto recognize the drives
View 4 Replies
View Related
May 23, 2010
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
View 23 Replies
View Related
Sep 8, 2008
I am having a problem similar to this poster problem http://forums.techguy.org/windows-nt...cond-boot.html I made a mistake editing my second hard drive XP registry. Now it won't boot. My other hard drive will still boot (what I'm writing from) I have a backup of the registry I made in regedit.exe and I download regcool and erunt. Is there a way I can restore me second hard drives registry from another bootable hard drive?
View 8 Replies
View Related
Jul 27, 2010
My computer automatically ran a PC tune-up and froze the screen afterwards. I cannot reboot the system ever since.
View 1 Replies
View Related
