Installed New Hard Drive On Dell Dimension E521 Desktop
Feb 3, 2010
I just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
View 6 Replies
ADVERTISEMENT
Mar 7, 2007
I just tried to install a new hard drive into a dell dimension 8100. It appears the motherboard is shot and so I am just going to use this new hard drive for storagew and I just want to remove XP off of it. Is it best to FDISK and if so how do I do that on XP? Is it the same as on the other operating systems or is there a better way?
View 1 Replies
View Related
Jul 13, 2010
Replaced old wd 160gig serial ATA HD with WD5000AAKS sata HD on Dell Dimension 4600. When trying to install XP, get error: filei386halaacpi.dll could not be loaded. The error code is 7.
View 3 Replies
View Related
Sep 21, 2008
I was running XP professional but got hacked or a virus and did a complete hard drive wipe out and then installed XP home. Now it does not find, or is having a conflict with, my ethernet controller, audio device, system management bus and VGA. I can probably download updated drivers for the other things if I can get it to load a driver for the ethernet, but since I can't, I am pretty well screwed. I would appreciate any help from anyone who is at all familiar with the Dell Dimension 2400.
View 14 Replies
View Related
May 17, 2010
I will try to make this brief. I have a dell dimension 2400 that the hd went down. I have a like new IBM drive installed, the bios recognizes it, however, I cannot get the computer to re-install the cd that i have from dell to reinstall xp. i have the boot sequence to start with the cd, however all I get is press f1 to try again, for f2 for setup.
View 5 Replies
View Related
Mar 5, 2007
Had a major crash and now can not install windows on the Dell pc as it can not see the hard drives anymore.
Installed a brand new hard drive and still no luck just says can not locate a hard drive to install windows on, done a check in the bios on the hard drive and it says it's fine but can not see it on the fresh install.
View 14 Replies
View Related
May 29, 2006
Last year I installed a CD burner in this computer. After I installed it I lost access to both Cdroms. I had tried to installed XP using 6 flopies loaned to me, but when I get to the last(6) flopy it restart on the already active XP. I do not know if it is a problem with my motherboard or what. I can not get to format the drive so I can reinstall windows.The version currently on the computer is XP SP2. I would not mind having to loose all my information on the drive rigth now, but I need to be able to access my CDroms.
View 8 Replies
View Related
Dec 17, 2009
I would like to upgrade my Dell 8400's graphic card.I am not a gamer.I just purchased a 21" HP widescreen monitor that is capable of 1920x1080 to replace the original (4:3 aspect ratio)Dell monitor that came with the computer.I just want a good quality,name-brand card that will provide the 1920x1080 resolution for the new monitor. The card that came with the computer is not capable of that resolution. My operating system is Windows XP.
View 10 Replies
View Related
Feb 5, 2007
I've been trying to bring my husband's older Dell 8100 P4 desktop back to life. It was an old ME system initially. I've done the following:Replaced the motherboard and ide cables New CMOS battery Flashed BIOS Replaced and upgraded the memory Reformatted the harddrive (using another system) and loaded Win XP Pro I've used this same harddrive (with XP Pro) sucessfully on another Dell so I know there is nothing wrong with the boot files. But when I install it in the broke Dell...no joy.
It hangs in the "Windows can not start normally" pick Safe Mode, Last Known Good Config...etc loop. None of the options work and it flashes a quick BSOD dump error (too fast for me to see) and then back through the loop.The BIOS recognizes all the drives, the memory, processor, etc.I also tried to boot with alot of the extra hardware removed (removed NIC, sound card, modem, un-hooked optical drives, etc) --- still same no-boot loop.
View 4 Replies
View Related
Feb 12, 2010
I have a Dell Dimension 2400 1.6ghz 1gb RAM with XP Pro on it for several years now. It has many programs installed on it. I purchased a faster used Dell Dimension 8400 3.6ghz hyperthreading 3gb RAM with XP Pro on it.My question is simple. My Dimension 2400 has an IDE hard drive and the 8400 has SATA. Rather than spend days re-installing and tweaking all of the programs on the 8400 I tried the following. I used Acronis Easy Migrate 7 to Image the IDE hard drive to the SATA hard drive and installed it into the 8400. It would not boot, I tried a repair install, then while booting I get a blue screen stop Error 0x0000007B. What do I have to do to fix this so it will boot?
View 11 Replies
View Related
Oct 19, 2007
Transferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
View 2 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Jan 10, 2006
A few days ago my hard drive crapped the bed so I bought a new one. I was wondering if I should do something different than what I was gonna do. I have the original Dell Windows XP SP1 cd that came with my Dell computer. I am going to install it on my new hard drive. After I do this should I go to www.microsoft.com and download the SP2 or should I do something different altogether? I just wanna make sure I have all the windows security updates on the new hard drive.
View 9 Replies
View Related
Jun 6, 2009
I recently returned to Kliptsch a pair of speakers which were not functioning well. While waiting for the replacements, I am unable to get any sound out of the computer. This includes streaming radio broadcasts as well as TV clips.
View 15 Replies
View Related
May 23, 2010
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
View 23 Replies
View Related
Jul 9, 2005
My son has a Dell desktop 2.66 ghz. It has XP home on it. I have reinstalled XP twice but it does not come up to reformat the hard drive. At the partition stage it says nothing about formatting. I cannot delete the main partition. How can I format the harddrive? I am using the Dell version of XP that came with the computer
View 4 Replies
View Related
Jun 29, 2005
I first had this problem when I tried to do the first installation. When it would get to the part of the setup in windows mode, it would just keep rebooting. I was able to finally get it to finish installing, and it seemed to be working fine, untill I tried to make sure all my drivers, applications, and my cable internet conection were installed.
View 37 Replies
View Related
Sep 25, 2005
I often but not always get an error message when working online. I am not sure whether it is a dell problem or my internet service provider. I have dial up. A small box pops up in my face and it says . . . windows must now shut down because the RPC service terminated. System shutdown initiated by NT/AUTHORITY then it counts down 60 sec and shuts off my computer. I have no control when it does this, i cannot X it out or make it stop. Very annoying. Sometimes it goes for hours and does not do anything, sometimes it will do it 3 times in 30 min. I have scanned for virus' and it comes up clear.
View 2 Replies
View Related
Apr 5, 2006
i'm working on a dell dimension 2400.windows crashed and there are no restore cds.i formated the hardrive and installed win xp professional.in device manager i don't have drivers for the ethernet controller and the usb controller.does anyone know where i can find these?
View 2 Replies
View Related
Apr 22, 2006
I've got an old Dell Dimension XPS T450 Pent-450 which had Windows Me but I put 2000 in it. Ran fine untill I tried to add memory. I put the memory back the way it was but now I get a window saying "THE LOGON
USER INTERFACE DLL MSGINA DLL FAILED TO LOAD" What do I do to fix this problem?
View 5 Replies
View Related
Mar 12, 2007
This has probably been asked before so feel free to respond with a link.I have a dell Dimension 4600 which i have reinstalled windows xp HE on countless times. It has never mentioned its license or asked for the code on the side.My friend has dell Inspiron 2500 laptop. She has had it for 6-7 years now and has never done a reinstall or reformat, so naturally its on its last legs.
View 6 Replies
View Related
May 29, 2008
I have really screwed up my computer --dell dimension 2400 ? talk about a mess. I wanted to clean off the hard drive, so I tried to reinstall xp using a friend?s cd because the only xp cd I could find was an upgrade (from win98).I don?t know what I did wrong (or if the problem was with the cd), but setup got into a loop we could not get out of.Since I had my xp cd to upgrade from 98, we tried to install win98. It did clean off the hard drive, but it failed to install completely and now the cd drive will not work. And when I click on IE, an error message ?Msoobe? comes up and says it has perfomed an illegal operation and shuts down.My brother also has a dell dimension 2400, and he thought there was a way to reset the computer to its original configuation. I tried the Control+F11 that he suggested, but the screen says it needs a device file to run that it cannot find. There is a line that reads
Vnetbios.
View 14 Replies
View Related
Feb 20, 2005
I am looking to upgrade the memory on my Dell Dimension 2400 to at least 512 mb. I have heard that you have to purchase a specific kind of ram (dell certified?) and that it won't just use any kind of brand. Is this true? If so, can someone point me in the right direction.I know that it must be DDR PC2700/333 but I'm unclear as to which brand to buy.I spoke with Dell and hung up unclear (she spoke very poor english) so really got nowhere.
View 5 Replies
View Related
May 7, 2010
i did a clean install for a dell desktop 2400 and i'm having trouble finding the drivers i need. I went to dell.com and the ones i have dl havent fixed the problem.
Is there a site that can diagnose and install drivers that are missing for free?
View 14 Replies
View Related
Apr 21, 2005
I have a Dell Dimension 8200 desktop running WinXP Home however It won't boot to the hard drive. I replaced the drive with a known working one and it still doesn't boot, says Diskette Drive 0 Not Found, however I figured that was referring to the floppy drive. Tried switching the ide cables around and that didn't work either. The power supply is working, as well as all of the fans. Its running a 1700mh processor. Cd-Rom works fine, and I can boot to a CD, I can browse the files if I boot to Knoppix, however it simply won't boot to the Hard Drive. I ran FixMbR and FixBoot in the recovery console, to no avail. Bios is configured properly, and I haven't touched the jumpers. Just to be sure I tried the hard drive in another system, and it wouldn't boot in that one either. Might be the mother board?
View 14 Replies
View Related
Nov 14, 2007
A DELL DIMENSIONS 9150 PC. There are 2 drives on it but the DVD is not working I have tried uninstalling it and rebooting so that it is automatically installed. I have also done the built in selt test by pressing F12 when the dell logo appears.
View 9 Replies
View Related
Feb 25, 2006
i want to format my hard drive , i do have dell inspiron 1150 laptop
View 6 Replies
View Related
Apr 18, 2007
my computer Dell Dimension 2350 has been running at 100% cpu usage for a while now and it started occuring after the guy who came and installed the internet left. I ran tons of spyware, adware, and virus programs and came up with nothing, i wiped the computer clean and ran a fresh install but the trouble presisted. when i'm in safe mode none of this happens, the speed is fine In process explorer it says that the DPCs and Interrupts are pretty much hogging all of the system's resources. I did plenty of reading on the internet to find out it was probably a hardware or most likely in my case a driver problem. I got Driver Genius to update all of my drivers and now i see the only one that doesnt even have a driver and is saying there is an error for is my ethernet controller. It tells me that there is no driver installed for it yet it's still working. I'm not sure how i find what brand of controller i need the drivers too
View 1 Replies
View Related
Jan 27, 2010
I am trying to access my system setup , So i can boot from my xp cd .I tried to hit F2 but it just keeps taking me to a black screen wanting my pw . I forgot my Pw and after trying to guess my pw to many times it now just shows a black screen wanting a pw ? How can i get pass this ? I have never seen this before .Need a Pw to get to bios setup?I cant boot from my cd unless i get into the bios setup .
View 3 Replies
View Related
Aug 8, 2010
dimension 8100 primary drive not found. no beep when powered up from mains
View 1 Replies
View Related
Jul 12, 2008
I have a Dell dimension C521 pc with XP home edition SP2. I am experiencing a lot of problems in starting up. The Dell screen comes on and then the white strip which should fill the box below "Dell" just seems to go halfway and hang. I then have to shut down manually and reboot pressing the F8 key and frequently have to do this(shutting down and restarting) several times before it actually gets going. Dell won't help me now as I am out of guarantee but it is really getting annoying and I keep thinking that one day it won't work at all!
View 4 Replies
View Related
