I have a Dell Dimension 8200 desktop running WinXP Home however It won't boot to the hard drive. I replaced the drive with a known working one and it still doesn't boot, says Diskette Drive 0 Not Found, however I figured that was referring to the floppy drive. Tried switching the ide cables around and that didn't work either. The power supply is working, as well as all of the fans. Its running a 1700mh processor. Cd-Rom works fine, and I can boot to a CD, I can browse the files if I boot to Knoppix, however it simply won't boot to the Hard Drive. I ran FixMbR and FixBoot in the recovery console, to no avail. Bios is configured properly, and I haven't touched the jumpers. Just to be sure I tried the hard drive in another system, and it wouldn't boot in that one either. Might be the mother board?
I am working on a Dell Inspiron 8200 Laptop.The first problem was a blue screen that said:Quote: STOP: c0000218 {Registry File Failure}The registry cannot load the hive (file):systemrootsystem32configsoftware or its log or alternate It is corrupt, absent, or not writable.Beginning dump of physical memory Physical memory dump complete.Contact your system administrator or technical support group for further assistance I fixed that by going into the recovery console and replacing:C:windowssystem32configsoftware C:windowssystem32configsam.bak C:windowssystem32configsystem.bakC:windowssystem32configdefault.bakC:windowssystem32configsecurity.bakwith the one in the C:windows epair directory
i bought this dell demension 4550 used i turn it on it says to hit f12 to reboot i do that and it comes back to the same f12 reboot how do i fix this problem
I get a blue screen when I boot up my Dell Dimension 8400 (XP Home Edition). The message indicates that it is a registry error. I have not added any new hardware or software or any drivers recently. I can not start in safe mode. I have run windows XP home edition setup from the Dell XP installation disc. when I select either enter to setup windows XP or R to repair using the Recovery Console, I do not ger very far before I again get the blue screen message.
Starting a few days ago my Desktop would freeze at the Dell boot up screen.. Id have to turn it off then back on to get anywhere.. The 1st time this happen I turned it off an back on twice an got through.. I didnt think much of it.. Today I was working on the computer and everything just froze At that very moment the last thing i did was change the screen saver to none.. then it all froze.. This time when booting up it jus kept freezing i didnt think i was going to be able to get through but on pwoer up i heard a beep an got an error saying it was having trouble booting up at checkpoint[Ithr]
All of a sudden when I start my dell - it does not boot.I just get an amber blinking light on the start up button. Nothing on the monitor.We have had many power outages in my area after which this happens. After a day or so the Dell will boot up. Yesterday I just pressed restart and since then all I am getting is the amber blinking light again on the start up button and nothing on the screen.
Checking computer for a friend. It is a Pentium 4 2.80GHz running windows xp, bios ver. A01, 512MB memory. They called Dell and were told to take it to a technician, which I am not, and they cannot afford it.When turned on it showed the Dell logo and then asked for a password which they had no idea what it was. It would not do anything at all. After doing a lot of reading on this forum and others I decided to remove the password by changing the jumper on the motherboard that said ctr password for,30 seconds, and then putting it back in place and start the computer again.It then booted to a screen that said " We appologize for the inconvenience but windows did not start successfully. A recent hardware or software change might have caused this. After some more explaining of possible causes it had the options of starting in, Safe Mode, Safe Mode with Command Prompt, Safe Mode with Networking, Last known good configeration, Start Windows normally. Use the up and down arrows to highlight your choice.When I do highlight any one of the choices and hit enter the computer stops responding at all.
I can now get in and check the system info etc. It showed no password. It also shows no cdrom installed and it has a cdrom and dvd. It only shows the hard drive and floppy drive. The hard drive is a Segate Barracuda 7200.7 80 Gbytes.I ran the diagnostics that are on the computer and everything checked out except the Read Test on the hard drive. It said IDE Disk Error Code 0F00.0244 Msg Block 77765935. Uncorrectable data error or media is write protected.I then tried to run a virus check from Fix-It Utilities on floppy. After the second disc it stopped and said it was unable to read drive c to restore boot area.Did I do something to the hard drive by removing the password and is there any way to check the hard drive for a virus? I don't understand why Dell told them to take it to a tech.
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
I have a Dell Dimension 2400 1.6ghz 1gb RAM with XP Pro on it for several years now. It has many programs installed on it. I purchased a faster used Dell Dimension 8400 3.6ghz hyperthreading 3gb RAM with XP Pro on it.My question is simple. My Dimension 2400 has an IDE hard drive and the 8400 has SATA. Rather than spend days re-installing and tweaking all of the programs on the 8400 I tried the following. I used Acronis Easy Migrate 7 to Image the IDE hard drive to the SATA hard drive and installed it into the 8400. It would not boot, I tried a repair install, then while booting I get a blue screen stop Error 0x0000007B. What do I have to do to fix this so it will boot?
Transferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
I recently returned to Kliptsch a pair of speakers which were not functioning well. While waiting for the replacements, I am unable to get any sound out of the computer. This includes streaming radio broadcasts as well as TV clips.
I first had this problem when I tried to do the first installation. When it would get to the part of the setup in windows mode, it would just keep rebooting. I was able to finally get it to finish installing, and it seemed to be working fine, untill I tried to make sure all my drivers, applications, and my cable internet conection were installed.
I often but not always get an error message when working online. I am not sure whether it is a dell problem or my internet service provider. I have dial up. A small box pops up in my face and it says . . . windows must now shut down because the RPC service terminated. System shutdown initiated by NT/AUTHORITY then it counts down 60 sec and shuts off my computer. I have no control when it does this, i cannot X it out or make it stop. Very annoying. Sometimes it goes for hours and does not do anything, sometimes it will do it 3 times in 30 min. I have scanned for virus' and it comes up clear.
i'm working on a dell dimension 2400.windows crashed and there are no restore cds.i formated the hardrive and installed win xp professional.in device manager i don't have drivers for the ethernet controller and the usb controller.does anyone know where i can find these?
I've got an old Dell Dimension XPS T450 Pent-450 which had Windows Me but I put 2000 in it. Ran fine untill I tried to add memory. I put the memory back the way it was but now I get a window saying "THE LOGON USER INTERFACE DLL MSGINA DLL FAILED TO LOAD" What do I do to fix this problem?
This has probably been asked before so feel free to respond with a link.I have a dell Dimension 4600 which i have reinstalled windows xp HE on countless times. It has never mentioned its license or asked for the code on the side.My friend has dell Inspiron 2500 laptop. She has had it for 6-7 years now and has never done a reinstall or reformat, so naturally its on its last legs.
I have really screwed up my computer --dell dimension 2400 ? talk about a mess. I wanted to clean off the hard drive, so I tried to reinstall xp using a friend?s cd because the only xp cd I could find was an upgrade (from win98).I don?t know what I did wrong (or if the problem was with the cd), but setup got into a loop we could not get out of.Since I had my xp cd to upgrade from 98, we tried to install win98. It did clean off the hard drive, but it failed to install completely and now the cd drive will not work. And when I click on IE, an error message ?Msoobe? comes up and says it has perfomed an illegal operation and shuts down.My brother also has a dell dimension 2400, and he thought there was a way to reset the computer to its original configuation. I tried the Control+F11 that he suggested, but the screen says it needs a device file to run that it cannot find. There is a line that reads Vnetbios.
I am looking to upgrade the memory on my Dell Dimension 2400 to at least 512 mb. I have heard that you have to purchase a specific kind of ram (dell certified?) and that it won't just use any kind of brand. Is this true? If so, can someone point me in the right direction.I know that it must be DDR PC2700/333 but I'm unclear as to which brand to buy.I spoke with Dell and hung up unclear (she spoke very poor english) so really got nowhere.
i did a clean install for a dell desktop 2400 and i'm having trouble finding the drivers i need. I went to dell.com and the ones i have dl havent fixed the problem. Is there a site that can diagnose and install drivers that are missing for free?
A DELL DIMENSIONS 9150 PC. There are 2 drives on it but the DVD is not working I have tried uninstalling it and rebooting so that it is automatically installed. I have also done the built in selt test by pressing F12 when the dell logo appears.
my computer Dell Dimension 2350 has been running at 100% cpu usage for a while now and it started occuring after the guy who came and installed the internet left. I ran tons of spyware, adware, and virus programs and came up with nothing, i wiped the computer clean and ran a fresh install but the trouble presisted. when i'm in safe mode none of this happens, the speed is fine In process explorer it says that the DPCs and Interrupts are pretty much hogging all of the system's resources. I did plenty of reading on the internet to find out it was probably a hardware or most likely in my case a driver problem. I got Driver Genius to update all of my drivers and now i see the only one that doesnt even have a driver and is saying there is an error for is my ethernet controller. It tells me that there is no driver installed for it yet it's still working. I'm not sure how i find what brand of controller i need the drivers too
I am trying to access my system setup , So i can boot from my xp cd .I tried to hit F2 but it just keeps taking me to a black screen wanting my pw . I forgot my Pw and after trying to guess my pw to many times it now just shows a black screen wanting a pw ? How can i get pass this ? I have never seen this before .Need a Pw to get to bios setup?I cant boot from my cd unless i get into the bios setup .
I have a Dell dimension C521 pc with XP home edition SP2. I am experiencing a lot of problems in starting up. The Dell screen comes on and then the white strip which should fill the box below "Dell" just seems to go halfway and hang. I then have to shut down manually and reboot pressing the F8 key and frequently have to do this(shutting down and restarting) several times before it actually gets going. Dell won't help me now as I am out of guarantee but it is really getting annoying and I keep thinking that one day it won't work at all!
I'm having trouble removing the graphics card from my computer. I was told to push down on a blue plastic device which will help remove the card. Nothing happens when I move the plastic device that looks like a 7.
Sometimes this computer will start, sometimes it wont When it doesnt, the On button just flashes orange, when it should be solid green. Sometimes it will start up and get to the log on screen and then just shut down and flash orange. It works fine when it does turn on. Iv been through the dell help and support stuff and that doesnt help
I am trying to "Killdisk" my HD so I can reinstall Win Xp on my Dell Dimension 2400 computer.I did reinstall Win Xp many time without any problem in the past, but this time something is totally wrong.It usually take aprox. 1 hour to reinstall but this time it took 5 hours and in the end:"13 minutes to finish install"and it frozes and nothing happen after that, I tryed 5 times with same result.I guess it got Virus/Malware in the root of computer memory. So I tryed to use Killdisk to clean up and start new to reinstall Win Xp, but I got following resxponse:"Error loading Free Dos Kernell"
I am having a hard time with running a chkdsk/f I can not get to any other screen but that. I didnt not have a problem with this computer until the large battery went out on my surge protector and when I moved it to my husbands music room (because his computer got a virus) Upon start up it gives the the options to start up normal, safe mode ect. Well I dont know what to do...I believe the f drive is my 3.5 disc drive it is dusty inside there and blew some out, that did not help and then I unplugged it, no help with that either. Any suggestions will help as I am unable to figure out what to do.
A friend of mined needed a clean install for his Dell Dimension 2400. The restore disc is very different as it wants to know what partition you want to put it on. There was no other choices.So I believe that we destroyed the restore partition without knowing it had one.If I buy a Microsoft Windows XP Home Edition OEM Version will it work to solve this problem? TigerDirect sells a copy. I need the full disc and not an upgrade. But will we have drivers problems. He does have other disc with his Dell which one says its for drivers but in reality its just disc of Docs. And one that does actually install the modem as he's still on dialup.Can I wipe his hard-drive clean and install an OEM version of Home Edition and will things work?A little out of pocket money is easier then suffering through trying to get it done.
