Dell Dimension 2400 - Blue Screen
May 15, 2010
I am having a hard time with running a chkdsk/f I can not get to any other screen but that. I didnt not have a problem with this computer until the large battery went out on my surge protector and when I moved it to my husbands music room (because his computer got a virus) Upon start up it gives the the options to start up normal, safe mode ect. Well I dont know what to do...I believe the f drive is my 3.5 disc drive it is dusty inside there and blew some out, that did not help and then I unplugged it, no help with that either. Any suggestions will help as I am unable to figure out what to do.
View 7 Replies
ADVERTISEMENT
Feb 12, 2010
I have a Dell Dimension 2400 1.6ghz 1gb RAM with XP Pro on it for several years now. It has many programs installed on it. I purchased a faster used Dell Dimension 8400 3.6ghz hyperthreading 3gb RAM with XP Pro on it.My question is simple. My Dimension 2400 has an IDE hard drive and the 8400 has SATA. Rather than spend days re-installing and tweaking all of the programs on the 8400 I tried the following. I used Acronis Easy Migrate 7 to Image the IDE hard drive to the SATA hard drive and installed it into the 8400. It would not boot, I tried a repair install, then while booting I get a blue screen stop Error 0x0000007B. What do I have to do to fix this so it will boot?
View 11 Replies
View Related
May 29, 2008
I have really screwed up my computer --dell dimension 2400 ? talk about a mess. I wanted to clean off the hard drive, so I tried to reinstall xp using a friend?s cd because the only xp cd I could find was an upgrade (from win98).I don?t know what I did wrong (or if the problem was with the cd), but setup got into a loop we could not get out of.Since I had my xp cd to upgrade from 98, we tried to install win98. It did clean off the hard drive, but it failed to install completely and now the cd drive will not work. And when I click on IE, an error message ?Msoobe? comes up and says it has perfomed an illegal operation and shuts down.My brother also has a dell dimension 2400, and he thought there was a way to reset the computer to its original configuation. I tried the Control+F11 that he suggested, but the screen says it needs a device file to run that it cannot find. There is a line that reads
Vnetbios.
View 14 Replies
View Related
Jun 7, 2010
I am trying to "Killdisk" my HD so I can reinstall Win Xp on my Dell Dimension 2400 computer.I did reinstall Win Xp many time without any problem in the past, but this time something is totally wrong.It usually take aprox. 1 hour to reinstall but this time it took 5 hours and in the end:"13 minutes to finish install"and it frozes and nothing happen after that, I tryed 5 times with same result.I guess it got Virus/Malware in the root of computer memory. So I tryed to use Killdisk to clean up and start new to reinstall Win Xp, but I got following resxponse:"Error loading Free Dos Kernell"
View 4 Replies
View Related
Mar 27, 2007
A friend of mined needed a clean install for his Dell Dimension 2400. The restore
disc is very different as it wants to know what partition you want to put it on. There was no other choices.So I believe that we destroyed the restore partition without knowing it had one.If I buy a Microsoft Windows XP Home Edition OEM Version will it work to solve this problem? TigerDirect sells a copy. I need the full disc and not an upgrade. But will we have drivers problems. He does have other disc with his Dell which one says its for drivers but in reality its just disc of Docs. And one that does actually install the modem as he's still on dialup.Can I wipe his hard-drive clean and install an OEM version of Home Edition and will things work?A little out of pocket money is easier then suffering
through trying to get it done.
View 14 Replies
View Related
Jun 2, 2005
I am trying to install new graphics card(Radeon 9250). I had my onboard graphics disabled but windows reinstalls it.I insterted the ATI disc, and I recieved the message,"try to set up with display adapter with standard VGA driver before running set up". Got me. I have a Dell Dimension 2400, 768MB RAM,and I am so unsure of anything else.
View 2 Replies
View Related
May 17, 2010
I will try to make this brief. I have a dell dimension 2400 that the hd went down. I have a like new IBM drive installed, the bios recognizes it, however, I cannot get the computer to re-install the cd that i have from dell to reinstall xp. i have the boot sequence to start with the cd, however all I get is press f1 to try again, for f2 for setup.
View 5 Replies
View Related
Aug 2, 2010
What other security (protection from virus and spyware) system do I need in addition to the already built in Windows firewall?Currently I have a Microsoft Windows XP, Home Edition, 2002 version, service pack 3, intel, celeron, CPU 2.20 GHz, 2.00 of RAM.
View 1 Replies
View Related
Mar 8, 2007
I am working on a PC for a friend and after installing Adaware,Spybot S&D, Spywareblaster and Avast I found too many things wrong with the PC and was trying to just reinstall Windows instead. I followed Dells instructions to Hold down Control and then hit F11 and then release both at the same time to get to the restore screen. Well it never came up and I got to the Safe Mode Last Known Good Configuration screen instead. I kept trying and nothing would change, so I picked Safe Mode. Now all I get is the BSOD that states Unmountable boot volume. Stop Error 0x000000ed (0x83376900,0xc0000006,0x0000000,0x0000000)
View 12 Replies
View Related
Jan 18, 2007
We have a Dell Dimension 2400 with Windows XP installed. We also have Norton Internet Security 2007, Windows Defender, and do not seem to have any viruses or spyware. Out hard drive is just under half full (17.5 GB of 37.2 GB).takes 5 or 6 minutes from the time we turn on the computer until we can actually do something with it (connect to the internet with IE or check email with Outlook 2003). I uninstalled Google Desktop and turned off Windows Messenger (from the start menu), both of which helped some (used to be even slower). I have tried to uninstall Dell Alert (which starts every time) but am unable to with Uninstall Programs and cannot find DAMon.exe to just delete that. Once it is up and running, the PC is reasonably fast (the problem is just at the startup and first 5 to 10 minutes). I have a newer laptop I use on our wireless network and it connects very quickly to the internet so that is not the problem (as far as I can tell). We did recently switch from a cable modem to slightly slower DSL.
View 14 Replies
View Related
Jun 12, 2010
How do I fix blue screen error message about winsrv?
View 1 Replies
View Related
Sep 30, 2008
Ive been getting a blue screen lately and this is what it entails
0x000000F4 (0x00000003, 0x85B9B020, 0x85B9B194, 0x805F9F88)
View 10 Replies
View Related
Mar 29, 2008
I get a blue screen when I boot up my Dell Dimension 8400 (XP Home Edition). The message indicates that it is a registry error. I have not added any new hardware or software or any drivers recently. I can not start in safe mode. I have run windows XP home edition setup from the Dell XP installation disc. when I select either enter to setup windows XP or R to repair using the Recovery Console, I do not ger very far before I again get the blue screen message.
View 7 Replies
View Related
Sep 20, 2010
When i start up my dell 8400 it goes straight to the black screen stating windows did not shut down properly and asks to start in normal safe mode so on... no matter which option i choose it goes straight to the blue screen stating the physical dump of memory how can i fix this problem
View 1 Replies
View Related
Feb 5, 2007
I've been trying to bring my husband's older Dell 8100 P4 desktop back to life. It was an old ME system initially. I've done the following:Replaced the motherboard and ide cables New CMOS battery Flashed BIOS Replaced and upgraded the memory Reformatted the harddrive (using another system) and loaded Win XP Pro I've used this same harddrive (with XP Pro) sucessfully on another Dell so I know there is nothing wrong with the boot files. But when I install it in the broke Dell...no joy.
It hangs in the "Windows can not start normally" pick Safe Mode, Last Known Good Config...etc loop. None of the options work and it flashes a quick BSOD dump error (too fast for me to see) and then back through the loop.The BIOS recognizes all the drives, the memory, processor, etc.I also tried to boot with alot of the extra hardware removed (removed NIC, sound card, modem, un-hooked optical drives, etc) --- still same no-boot loop.
View 4 Replies
View Related
Mar 13, 2007
I got a friends personal computer it is a dell demension 2400 it won't do anything except go to the screen with big dell letters on it.I have a soyo techaid card it came up with a code number 35 which could be initialize alternate chipset registers or is it what dell says there code 35 is cmos shutdown test in progress or bad.
View 14 Replies
View Related
Jun 13, 2010
I left a MICROSOFT WORD CD in the player and shutdown, the next day I turn on the computer and the CD started up, and it has gone to black screen with cursor each time I start it now. I get 2 choices, F2 or F12. The 4 code lights on the back panel are all green indicating no problems, what can I try?
View 1 Replies
View Related
Apr 12, 2009
I have a dell 2400,2.2 gig cpu, 512 ram, that I just put a new hard drive(40 gig) in,I installed winxp pro ,but the computer will not boot from hard drive,I went to repair console on the win xp cd,and typed fixmbr, then when it said it had done that I again typed fixboot, but it still will not boot,
View 17 Replies
View Related
Jul 30, 2010
how to reset default settings in a Dell 2400
View 4 Replies
View Related
Aug 12, 2005
Hello folks, I am running XP Home on a Dell 2400 & want to have the
Task Manager automatically load so it will be showing in the Task Tray at
startup w/out having to bring it up myself. Is this possible?
View 8 Replies
View Related
May 16, 2010
I have dell 2400, when I try boot I get the f1 and f2 only keyboard failure and mouse failure with num lock lights all time.
View 2 Replies
View Related
Jan 24, 2007
I've been working on trying to restore my girlfriends Dell and I'm having no luck.
It's a pre June 2004 computer so the Ctrl F11 startup trick doens't work and i don't have a restore disk.
View 9 Replies
View Related
Feb 1, 2010
My computer asks for a password that i don't remember using before start up. Won't let me get to start up screen. How can i fix this?
View 1 Replies
View Related
Oct 19, 2007
Transferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
View 2 Replies
View Related
Aug 26, 2007
I currently own an older dell latitude cpx laptop, its fairly outdated, i know but im currently running it off of my wireless router, i have a d-link wireless-g adapter in my pcmcia slot, but when i boot my laptop with it, i get blue screen errors, but if unplug it and boot it up then plug in my adapter, it works perfect, i know its not a big deal to just plug it n after i boot up but i was wondering.
View 1 Replies
View Related
Oct 5, 2010
I am trying to fix a friends notebook but every time I turn on the computer it takes me to the safe mode selection and which ever mode I select, it starts loading but breaks out to the blue screen with the following error: 0x001902030x8e572b80xc00001020x00000000. I had this machine about a month ago and after checking the Hd and cleaning it I uninstalled Norton security and installed avira. I took it back to him and I thought everything was OK but he said he had put it in a closet for a couple of weeks and when he tried to turn it on it stopped on the Blue screen every time. I would run chkdsk /f if I could get to the CMD prompt but can never get past this error. 0x001902030x8e572b80xc00001020x00000000 Anyone have any advice for me. I don't have his XP disk but can probably get it if I need to.
View 14 Replies
View Related
Sep 20, 2008
Please help me with installing Windows XP on Dell T7400 with H/W RAID controller on 4 15k SAS harddrives. When installing windows I hit F6 to add optional RAID drivers and load this drivers using floppy drive, but Windows crashes anyway. The same is without loading optional drivers.
View 2 Replies
View Related
Jan 3, 2008
I had a computer, a Dell Inspiron B130, and I was about to run the last released version of the DooM source port Risen3d. Earlier, I had turned up the volume due to a music file being very low. The result was E1M1 blasting to all the people in the very small room. I tried to turn the volume down, but the old PC was having a hard enough time loading all the hiresolution textures and MD2 models. The power button wouldn't work, so I closed the cover and started to walk out. The music stopped, and the power lights went off. I opened the cover to restart the comp, then the lights came back on, the music blaring again, and I was starting to get stared at. I'm very shy, so I just pulled the plug on the laptop. The battery wasn't connected properly, and the power was cut instantly. Everything stopped, and I waited for a while to let thing cool off (one problem with the PC is that it doesn't ever give me heat errors even though the botom is about to melt off).
I put the battery back in properly, and turned it on. It went normal, showing me the Dell BIOS screen, then the second BIOS screen, then the boot options came on. It said to choose reboot normaly if you didn't know what happened or there was a power failure. I chose it, and after the Windows boot screen came up (I am running Windows XP Home Edition) and the little blue bar went all the way accross, a blue screen came up with an error message. A wiser computer man than I said to just leave it alone for a while, so I'll give what I remember. It was saying how an error had come up and something like "SECTION3_INITIALIZATION_FAILED" and said ***STOP (some address here, when I try again I'll post it) I didn't have a reboot button, so I had to cold restart. I tried every boot mode available, and safe mode gave me the same errors. The only thing that works is the diagnostics partition of the hard drive. It says all is well, and everything surely isn't right. The original operating system is on there, and no recovery disk is included. It shouldn't be a virus or a malware, I have had no problems until now. If the system is toast, tell me what I should do to get some data off the drive, I need some of that stuff. (as in almost life and death need, but more like a money loss need)
View 14 Replies
View Related
Jun 6, 2009
I recently returned to Kliptsch a pair of speakers which were not functioning well. While waiting for the replacements, I am unable to get any sound out of the computer. This includes streaming radio broadcasts as well as TV clips.
View 15 Replies
View Related
Jun 29, 2005
I first had this problem when I tried to do the first installation. When it would get to the part of the setup in windows mode, it would just keep rebooting. I was able to finally get it to finish installing, and it seemed to be working fine, untill I tried to make sure all my drivers, applications, and my cable internet conection were installed.
View 37 Replies
View Related
Sep 25, 2005
I often but not always get an error message when working online. I am not sure whether it is a dell problem or my internet service provider. I have dial up. A small box pops up in my face and it says . . . windows must now shut down because the RPC service terminated. System shutdown initiated by NT/AUTHORITY then it counts down 60 sec and shuts off my computer. I have no control when it does this, i cannot X it out or make it stop. Very annoying. Sometimes it goes for hours and does not do anything, sometimes it will do it 3 times in 30 min. I have scanned for virus' and it comes up clear.
View 2 Replies
View Related
