Maxtor OneTouch II External Drive - Light On Drive Not Blinking
Jun 29, 2005
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
I have video saved on a Maxtor 80GB external drive that is formated in fat32, from a Windows ME system. I need to move the video info to a newer PC w XP. I have read the forum comments on how to convert from fat 32 to NTFS. However when I connect the Maxtor firewire the PC will NOT RECOGNIZE the drive. Until recongized I can't convert. I have other larger external drives that are in NTFS and are recongized immediately.
My Maxtor External Drive became corrupted and I needed to re-format the drive. Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive. Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive. Can get Windows to recognize my Maxtor Drive? When I deleted the drive I was working in the "Computer Management" Screen. I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.
I have all of our digital photo's on this external hard drive & now I can't access it. When I try I get an I/O device error message. Can anyone tell me how to get back in even once to copy the photo's to my internal hard drive & then burn them?
Microsoft did an upgrade to my desktop automatically, called a service pack 3, after which my Maxtor 3200 external hard drive stopped being recognized by my Windows XP system. A code 10 error appeared every time I tried to access through my device manager, and I cannot find a driver to operate this hard drive, I will many songs and pictures if I cannot access this external hard drive. I went on the Maxtor site and they said, it is an internal driver that operates off of my system, what can I do to access the data on this external hard drive.
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
I am using the internet and all of a sudden the DSL and the Internet light start blinking. That means I lost connection in my DSL and internet.(when the lights are solid green that means they are working and have connection) When I first bought this product like 5 months ago this didnt happen to me but its been doing this for the last month.
I have an HP desktop. I accidentally hit the standby button on the keyboard. It started to put my computer into standby but seems to have completely powered it down. I couldn't turn it back on at all. I've tried hitting the power button and unplugging the computer. Nothing works. There is a green light near the power cord in the back blinking and that's it. I've tried unplugging all peripherals before plugging the power back in. I've also tried unplugging it and pressing the power button a few times before plugging it back in. I just can't get it to turn back on.
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
i connected my external HDD to my system i copied some data but now i'm not able to open that drive i have partitioned the 160GB drive to 8 20GB drives bcoz i have very important data in that drive
I have a Maxtor internal 300gb drive that I've mounted in an external casing. The other day I knocked it over and ever since then when I turn it on it makes some kind of warning sound three times. The computer doesn't detect it anymore and I can't access any of the information on it
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
I installed the patch last night on my windows xp service pack one machine. Plugging in the drive causes the icon to appear in the system tray, but there is no drive letter assigned to the drive and going in to explorer shows the drive "locked".
My sis has one of those Wally-Mart Acer mini laptops; NO CD-ROM drive in it (PS: way-bad idea! Never buy a computer w/o a dvd/cd drive in it!). She managed to delete the graphics card driver and so when that occurred and rebooted, nothing on-screen! Its there, you just cannot see anything in windows! And, because there is no drive, the CD with all the original programs cannot be run in start-up mode without an external CD-ROM drive
I want to use my (HP Pavilion zv6000 w/XP) laptop as that external drive to re-load her original CD, which (of course) has all the drives on it! At start-up, the Acer (also w/XP) has an option to start-up from an ext. drive, so it has that capability (obviously, w/o a drive of its own), but how to make my HP "look" like an external drive (via USB-to-USB hookup) is the problem!
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
I just installed a new hard drive then I installed windows XP SP2 on the disk and the computer keeps rebooting and I'm getting a blue screen c000221 unknown hard error. Then I re-install windows 2000 it works Ok. Then I installed windows XP SP1 it work OK, then I installed the SP2 and the computer started to reboot again. I used drive jujitsu and it was OK. So what is the issue with SP2 and the Maxtor drive anyone knows or has seeing this issue?
I have a maxtor hard drive SATA 200GB as my main drive and a second drive D. Very recently when I have noticed that my computer took longer to boot into windows. Applications seem to take a bit longer than usual to load. I have XP SP2 installed. I defragment my drive every few weeks so its not a defragment problem however when I try to defrag it now, it takes many times longer to do so. Also for a scan disk of C: (chkdsk on boot) it took 6 hours to get to about 25%. So there must be a problem. I can hear the hard drive loading sound for a few seconds and then there is a very long pause maybe about 10-20 minutes. It should only take a few hours the last time i did it maybe about 5 hours. Something is wrong.
When I transfer a large file like 1gb into my drive D it takes 15 minutes. Which is a bit long for a SATA enabled hard drive. I have had this drive for about 2 years now and it has never gone this slow before. I have downloaded the seatools from the maxtor website which diagnoses the drive. The tool ran slow but my hard drive passed the tests. Also when I ran that scan disk, it did say there was a mirror copy of something and also some other things. I think it had the word security in it so it deleted somethings. It mentioned indexes and some files. I forgot most of it.
I have checked my D drive and it is running fine and unaffected. Also I noticed during bootup that on the windows logo screen, the one with the bar moving from left to right that it freezes for about 5 seconds somewhere near the end of its loading. Then my keyboard lights come on (recognises keyboard). Later after the logo disappears, the screen is black for about 1-2 minutes and the hard drive periodically stops loading then starts loading something. This also happens when the welcome blue background screen comes on which is making boot times slow. Also happens when I shut down. There are some periods of hard disk inactivity.
I have a hardrive( Maxtor 6Y200P0) wich have got corrupted and bad segments. (this seme to be a common problem with Maxtor drives) Im almmost sure this drive have psychical damaged clusters, cause i have tested alot & alots of tools that should fix this has failing in repairing this damaged clusters and segments. this includes Maxtor official PoweMax v 1.21, wich fails to complete the surface test. i have got an Error Diagnostic Code=de676679. a code with a 8 numeral should indicate that a Maxtor Drive drive is broken,and is in need of replacement. thats all i know where should i send this code for a real analyz?, cant find anything on Maxtor Website, Another question, there is allso an option to do a Low ore High level formatation of the drive. I have heard that this could fix corrupted segments, If so,this must only be possible on logical damaged hardrives, not psycial damaged drives right? i have waiting with reformatation cause im unsure what type damage the drive have, and this is my last alternative to do.? should i do a low/high level formatation anyway?
I've had a Maxtor External Hard Drive 250GB for about 2 and half months now, and its been working pretty well until now. The small light will come on only if the plug in the port on the EHD is being held in the right position, and the 2 plugs in the computer ports are fine. The light is on, but the computer is not reading it. It also makes a small beeping noise as the light goes on and off. Is it possible to fix, or at least get files off?
I got this inspiron 1100 off ebay it didn't come with a hard drive so I put the hard drive from my inspiron 9300 into it and when you turn it on the the power light is on and the hard drive light blinks once and stays off. The screen remains black and when i tried to hook it to a montior still nothing black screen. was wondering if i used the wrong kindof hard drive?or am I looking in the wrong direction.
I have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
About 6 months ago I installed a 500-Gig Maxtor External HD I use as a "back-up" source.When I first installed it, it worked fine. Then I had a system crash and had to re-install WindowsXP Pro. Now this external drive is not recognized. A drive icon is also not displayed in My Computer. In System Hwde Devices, there is a yellow exclamation mark next to the (Maxtor 500-Gig) USB Mas Storage Device. I have made several attempts to uninstall this drive and re-install it but the same identical message appears each time: Mass Storage Device Not Recognized. I'm also getting a Code 39 error code informing me that the drivers for this device are either missing or corrupted. Some time ago I was told that I would have to uninstall and re-install Windows XP Pro if I wanted to correct this issue. Is this true?
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
If you get another hard drive cause yours is almost full and there fore messing with the virtual.memory. If you get an external harddrive is it better to move the pagefile to the new hard drive which is what I was going to do change the drive for the virtual memory, then I got thinking, in case you didn't use the external drive all the time hooked up for whatever reason they you wouldn't have a pagefile on the old one does that make sense? I thought maybe it would be better just to move a bunch of pics and music to the extenal drive and leave the virtual memory (pagefile) where it is on the old drive, or would it make any difference??
