About 6 months ago I installed a 500-Gig Maxtor External HD I use as a "back-up" source.When I first installed it, it worked fine. Then I had a system crash and had to re-install WindowsXP Pro. Now this external drive is not recognized. A drive icon is also not displayed in My Computer. In System Hwde Devices, there is a yellow exclamation mark next to the (Maxtor 500-Gig) USB Mas Storage Device. I have made several attempts to uninstall this drive and re-install it but the same identical message appears each time: Mass Storage Device Not Recognized. I'm also getting a Code 39 error code informing me that the drivers for this device are either missing or corrupted. Some time ago I was told that I would have to uninstall and re-install Windows XP Pro if I wanted to correct this issue. Is this true?
My Maxtor External Drive became corrupted and I needed to re-format the drive. Unfortunately, while Working in Windows XP I accidentally deleted the partition and the drive. Now I can't get Windows XP to recognize the Maxtor Drive. I tried re-booting the PC and plugging in the Maxtor USB Cable, but this did not work. The Maxtor Drive was my H: Drive. Can get Windows to recognize my Maxtor Drive? When I deleted the drive I was working in the "Computer Management" Screen. I navigated to this screen through the following path: Control Panel/Administrative Tools/Computer Management.
Earlier I formatted a PC with windows XP on it, the minute I plugged it up, a notification came up and said "This device can perform faster on a high speed 2.0 USB port". It says that when I plug them up into any USB port on the computer itself. The thing is, it will pretty much hang the system until I disconnect the external HD. It won't freeze 100%. It's responsive but no applications will open while it's trying to recognize the external.
It sounds to me like a USB driver problem or something because I'd assume it'd still recognize the drive even if it wasn't performing in a high speed 2.0 USB port... Any way to reinstall USB drivers? Never done that before. I have to use Hiren's Boot CD if I want to transfer files, simply because Windows XP won't recognize it and keeps popping up the notification.
I've had a Maxtor External Hard Drive 250GB for about 2 and half months now, and its been working pretty well until now. The small light will come on only if the plug in the port on the EHD is being held in the right position, and the 2 plugs in the computer ports are fine. The light is on, but the computer is not reading it. It also makes a small beeping noise as the light goes on and off. Is it possible to fix, or at least get files off?
I have video saved on a Maxtor 80GB external drive that is formated in fat32, from a Windows ME system. I need to move the video info to a newer PC w XP. I have read the forum comments on how to convert from fat 32 to NTFS. However when I connect the Maxtor firewire the PC will NOT RECOGNIZE the drive. Until recongized I can't convert. I have other larger external drives that are in NTFS and are recongized immediately.
I have all of our digital photo's on this external hard drive & now I can't access it. When I try I get an I/O device error message. Can anyone tell me how to get back in even once to copy the photo's to my internal hard drive & then burn them?
Microsoft did an upgrade to my desktop automatically, called a service pack 3, after which my Maxtor 3200 external hard drive stopped being recognized by my Windows XP system. A code 10 error appeared every time I tried to access through my device manager, and I cannot find a driver to operate this hard drive, I will many songs and pictures if I cannot access this external hard drive. I went on the Maxtor site and they said, it is an internal driver that operates off of my system, what can I do to access the data on this external hard drive.
I have two computers (a PC and a Mac) and a Maxtor One Touch External Hard disk 250 GB. I would like to back up these two machines using a single external hard disk. So I have partitioned the hard disk into two and have NTFS and FAT32 as the file systems. The NTFS partition is around 163 GB and the FAT32 is around 75GB. I could successfully back up the PC into the NTFS part but have problems with the Mac.
When the hard disk is mounted on to the Mac, both the partitions appear on the desktop. The Mac OS is 10.3 and it identifies both partition correctly. It recognises the NTFS part as readonly and FAT32 part as "readable and writable". But when I tried to backup for the first time there was an error saying "insert a new disk". I tried to overwrite the contents of the FAT32 part as I didn’t need them any longer hence asked to proceed with the backup. The Mac started erasing. I thought it was erasing the files previously present in the FAT32 part but it continued erasing for some time and finally erased the FAT32 file system itself. So the icon representing the FAT32 part of the partition of the external hard disk disappeared from the Mac’s desktop......
I have a Computer which operates on XP Service Pack 2 and has a Maxtor 1TB external Hard Drive hooked up. We do a lot of Video Editing (programs such as DV Storm, Vegas etc.) and up until yesterday the external came up as Local Disk E, but it became unplugged whilst the Editing programs were running.It now it comes up as Local Disk (I) but the problem is the Edit programs doesn't recognise any of the files (avi., mpg etc.) that are on the drive (comes up as 'invalid path'), and nor does it show them in their previous format.
recently me my brother and sisters computers all got the same virus it seems and where all on one wireless net work and it started with my sisters laptop sayin the harddrives not instaled wheni start it up and nothing els and my brothers desktop kept feezzeing like my desk top did then mine stoped turning on all togther and would get to the desk top and crash and take 3-4 trys to get started then i did a destructive system recovery on my brothers comp and it is fine perfect like the day we got it then i did it to mine and it started up and worked but kept frezzing on the desk top and then now when i start it up and try to restore from last know workin configuration it says windows/system32/config/system is missing or corrupted hit r to start repair from original cd rom disks and i dont have those is there a way i could find this file and put it on a cd form one comp and fix my comp with it? or do i have to go buy a new windows and hardrive? and when i try to boot it any ways it says system not fully installed error
I have two partitions on the same drive and both had Win XP installed. I decided to reformat the second partition, and for no particular reason decided to install Win 2000 there. Now on boot up I get the normal boot.ini menu but if I choose XP I get an error that says Win 2000 has a missing or corrupted file: WINDOWSSYSTEM32CONFIGSYSTEMd……..SYSTEMd not a misprint! I hit reset and choose Win2000 at the boot menu and Win 2000 comes up OK . I tried to repair 2000 and I re-installed it but still get the same error. I tried modifying the boot.ini file but it didn't.
I got the following message upon booting my pc.STOP: c000021a {Fatal System Error}Te Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000022 (0x000000000 0x00000000).The System has been shut down.The day before I did a windows update.I can not boot into windows.. Not even Safe Mode or dos prompt.
My Problem is,I got an error come up "windowssystem32configsystem" missing or corrupt.How do I repair the registry without a windows xp disc and is it easy if it can be done
while using the Windows XP Setup disk to partition the new drive, I accidentally used the "Create Partition and Install Windows XP" option, instead of just creating the partition. Unsurprisingly, Windows freaked out at having two copies installed on the computer, and it took me quite a while to salvage the thing so it would boot. I ended up using the second Windows install (on D: on the new disk), and left the old, unworking Windows install (on C:) dead on the original Western Digital drive.
I was exiting a game and windows started getting really slow and i could not click on anything so i held my power button on my computer and shut it off. When I started it again it said "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem" then it says I can put my original CD in and go to the recovery console. When I did this I got to the first step in a tutorial online where I type "copy c:windowsystem.... etc"
I get an error on boot up telling me that the config file is corrupted or missing. IT also states to please insert CD to try and repair this problem. Press "r" before the first screen. If I do that will it try and reinstall XP? Will I lose all my data?
I'm running Windows 2000 Professional, and encounter the problem: "The file hal.dll is missing, please replace it or reinstall it". That shows up when i try to boot it up.When restarted, it looks like its about to load windows 2000, then it stops and says"The file Hal.dll is missing or corrupted,please reinstall to replace it" . I wanted to go to safe mode, but it wont load because of that corrupted file.
Windows XP pro. lots of corrupted files which doesn't allow windows to function properly.I have windows xp pro cd with product key ready to go.How do I format the hardrive and reinstall windows?
I am running Win XP Mediaa Center Edition 2005 and have just received a message on the second boot up page saying: Windows cannot load because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You may attempt to recover or repair this file using the original Windows CD
I have followed the wizard for system restore but having set the date and pressed next nothing appears to happen. How long should it take? I have tried this in safe mode as well
After working for sometime with Maxtor One Touch II external drive, I have experienced the following problem: If the computer is left for some period of inactivity, for 1-2 or more hours (the light on the drive is on and not blinking) I cannot access the drive and the OS message is "One touch is not responding". The only remedy is to restart the computer. My System consists of: WindowsXP SP2 and 512 MB Ram The Maxtor OneTouch II drive is connected via a firewire inlet of the computer, the file system being NTFS. The drive is partitioned unto 2 logical drives (~150 GB each)
I have a Western Digital Passport 320GB External Harddrive that is no longer recognized by the computer. It worked two days ago... now nothing. I get a pop up when I plug it in that states: USB Device Not Recognized.I checked Device Manager: Universal Serial Bus Controllers-Unknown Device.It's not a drive letter issue. Windows XP SP3 does not recognize it all.
Whilst trying to reformat one hard drive i didnt realise that an external hardrive was still connected. Noticing a second harddrive on the screen i just thought that xp was being weird. and like an idiot i deleted the partiton before realising. Now the drive dosnt show in my computer.What steps can i take to make this drive accessible again?
My computer says that my DVD and CD drivers are missing files and may be corrupt, i wonder if anyone knows how i can find thes files again or has any info that can help me.
I have bought an external hard drive and I would like my various programs to automatically save data to the external hard drive Would I need to install the programs onto that hard drive?
i am new to this forum, but i have looked everywhere and i have a problem i can't seem to find the answear to. I reformated my harddrive, it is a seagate baracuda 160gb drive. I have it hooked up by raid i think. Anyways when i boot my computer it sees that i have a harddrive, but when i go to load windows it doesnt find it. I heard i need to install drivers for it, but i dont know which ones and where to get them from.
My 500GB External HDD is not accessible anymore. It was working yesterday when i used it with windows 7. It automatically ran the disk check on that system and it worked. When i plugged into the USB of my XP laptop and double clicked the drive in My Computer the following error message appeared: D: is not accessible. The file or directory is corrupted or unreadable. The drive letter shows on My Computer and Disk Management.
My laptop doesn't detect the external hard drive. It is strange that sometime the laptop can detect the external hard drive, but most of the time it doesn't.
I have tested 2 different external hard drive and both of them are not detected by the laptop too. When I tried it on other computer, both external cases work perfectly. I am not sure is it because of the usb driver is corrupted or what, but any helps is much appreciated. Thank you.
A friends HP Media Center PC m7077c crashed. Had no recover disk, etc. Installed XP Pro SP2 and I need drivers (according to Device Manager). No sound is obvious but video controller is not. Video seems okay. Where do I find drivers for this machine. XP Pro, Home and MCE are different OS's ... as far as my experience. The drivers are not the same.
