I can't believe this is happening to me. AGAIN. How do I even begin to figure out what is wrong? Let me provide some background.In March I had a hard drive failure. I had shot 4gb worth of photos and that night I copied the memory cards onto my hard drive. I then began sorting, re-naming, and organizing them. Next morning, I was in the middle of doing that when it died. The computer froze up a couple times before eventually the drive was not recognized. Diagnostic tools showed some corruption or logical failure. I RMA'd the drive but I lost several gigs of photos from a previous day.
A friend of mine would like me to take a look at his computer for him later. He said he is getting an error message when he starts it up that says Failure to read internal drive Press F1 to reboot. He doesn't have the exact message but that's about it. Does this mean the hard drive is bad, or is there hope that I can fix this?
I am trying to determine if I really have a hard drive failure. I'm running XP pro. While running EXCEL this morning, my computer froze. Could do nothing but turn the power off and re-boot. Upon re-booting, prior to getting to the Windows screen, I got a message about can't find the hardware. Re-booted again, this time it said there was a problem with the hard drive and it ran a check disc. Took about 6 hours. While it was running, it said there were about 8 to 10 problems had to do with the IE5.1 temporary files. It finished and booted to windows XP.
I thought all was ok. Finished by Excel work. Printed it out ok. Came back later to a black screen with the same initial message about can't finding the hardware.I called Gateway - Tech adviser had me run a program from the Recovery disc that checks the hard drive. Program said hard drive failed. Tech rep said I need to get a new Hard drive.Is this correct or are there other possibilities?
This past August i purchased a Dell PC. It has 160gig Hard Drive. Last night while finishing up some work my PC froze. Because i couldnt move i rebooted my machine. After i rebooted my PC was stuck in the Windows XP boot screen(The screen where that little blue bar scrolls just before the PC boots into windows). It wouldnt boot into windows. I decided to reboot again, and again it just shows the windows xp scroll bar trying to connectI then called Dell, i was asked to boot up and press F12 to do a diagnostic. It came back showing "Failure 7". The Dell "Guru" epxplained to me that my hardrive had failed on me.
My laptop, which was my dad's old office laptop, recently crashed. One day when I turned it on, a blue screen popped up and said there were a corrupt file or something. So I decided to reformat using a Windows XP cd, and for some reason it kept getting stuck on 91%, so I just left it on and it eventually hit 100% and completed.After everything was done, I turned it back and after the first Dell Screen bootup, the screen goes blank for 30 seconds, then a a line of white vertical lines show up at the bottom, looking at though something is loading, and it eventually finishes after a minute or two.Next the XP Bootup Screen comes up, and begins to load, but then the screen goes blank again.
Every time I turn my computer on I am getting the following error message;
"Read Failure on internal hard drive. No bootable devices -- Strike F1 to retry boot F2 for setup utlility"
and every time I attempt to retry boot by entering F1 I do am immediately brought back to the same message. Can someone please help as I am in desperate need to recover company files located on the hard drive.
My external hard drive has suddenly stopped working.My computer can see the drive (but not the drive label) and the shortcut I have for the drive will open it but when it does there is nothing there.I have downloaded a few so called free data recovery pieces of software and they can all see the data on my drive with no problems, even stuff I'd previously deleted seems to be available for recovery, however, as soon as you try to recover the data these "free to use" tools need to be registered and paid for.
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
I am experiencing a registry (hive) file failure which does not allow me to load Windows. Whenever I try to boot in safe mode, or any mode, I get a blue screen that reads:i did some searching on this forum and found a thread that mentioned taking the drive out of the problem computer and slaving it into a different machine to repair the registry. I do have another computer, so this would be an option for me although may be a bit too advanced for my expertise or lack thereof. But I have a BlacX hard drive docking station (basically an external hard drive reader)
I had a hard drive failure, and have a full copy of the hard disk which contains the operating system. However, when I copy this in its entirety to a new hard drive, that hard drive does not boot.
The bios just states "No Operating System".
Is it actually possible to do what I am trying to do? That is, to reinstate the operating system from a backup CD?
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
I have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
computer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
Is there a way to convert a partioned hard drive (c: / d for example and make it a single drive (c without losing all your folders and programs on the partioned drive. I am running out of space on the c: drive but the d: drive has some space left on it. And I want to just put them together as one drive.
A while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
