Only Boots With CD In Drive During Installation Of OS?
Apr 3, 2006
Fresh format and install onto a 320gb SATA drive. Windows XP SP2.BIOS recognizes the drive.Unless the CD-ROM is ahead of the Hard Drive in the BIOS boot settings, and the Windows XP SP2 install disc is in the drive, the system will not boot.The message displayed is along the lines of "Disk boot error. Please insert a system disk and press enter."If the CD-ROM is moved back or removed from the boot order, this result also occurs.
If the install disc is in the drive, and the BIOS is instructed to look for a CD-ROM boot before a Hard Drive boot, a prompt is displayed along the lines of "Press any key to boot from CD." If no key is pressed, windows XP boots normally. Formating, reinstalling XP, messing with BIOS boot order, confirmed HD reads correctly in BIOS, with and without CDs in drive, repairing master boot record, adding a boot delay in BIOS.
View 5 Replies
ADVERTISEMENT
Apr 24, 2005
I have 3 hard disks with multiple boot The C drive died on the first disk which uses 98 - I don't use it as an os Disk 2 holds a couple of XP's in different partitions - I use the D drive XP all the time Disk 3 has one os and partitions By installing these os, I was confident that in case of failure I could reboot to another - Huh ! Of course it always looks for boot.ini on the c drive ......I have replaced the C drive and am trying to install XP pro from a cd. It gets so far then when it restarts/reboots the whole damn installation starts from scratch again
View 9 Replies
View Related
Oct 3, 2007
I installed an anti virus program and restarted it. it turned to a screen to boot windows safely. But it couldn't continue. I fixed now by reinstalling but can anyone tell what was the problem.
View 14 Replies
View Related
Jun 1, 2005
When the system boots into the new drive R:, it still wants the boot partition c: for something. If I boot with the IDE disconnected, it'll boot to the login screen, and allow me to log in, but after a few minutes of a blank screen & cursor, it drops back to the login.
I have PartitionMagic 7.0, and used DriveMapper to change all references to C: to R:, but that didn't do it. How do I cut my system's dependence on the failing drive, before it fails altogether?
View 12 Replies
View Related
May 5, 2005
This past August i purchased a Dell PC. It has 160gig Hard Drive. Last night while finishing up some work my PC froze. Because i couldnt move i rebooted my machine. After i rebooted my PC was stuck in the Windows XP boot screen(The screen where that little blue bar scrolls just before the PC boots into windows). It wouldnt boot into windows. I decided to reboot again, and again it just shows the windows xp scroll bar trying to connectI then called Dell, i was asked to boot up and press F12 to do a diagnostic. It came back showing "Failure 7". The Dell "Guru" epxplained to me that my hardrive had failed on me.
View 7 Replies
View Related
Oct 2, 2006
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies
View Related
Mar 8, 2006
I have 2 hard drives. My operating system is installed on my primary drive and my programs are on the secondary drive. To get the best performance which drive would be better to install the Internet Service Provider?
View 2 Replies
View Related
Dec 17, 2006
i`m using maxtor 200gb divided into 4 partitions c: is for the operating system and d,e,f only data. i want to reinstall windows only on c: cause i think the registry is pretty sick CAN I FORMAT ONLY C: DRIVE AND REINSTALL WINDOWS WITHOUT CAUSING ANY DAMAGE TO D.E,F DRIVES?
View 2 Replies
View Related
Dec 12, 2007
I have a Dell Dimension 2350 that I want to add a 2nd hard drive to. However when I opened it up there is no additional brackets. Can I go ahead and still put one in and have it just lay in the bottom of the case?
View 1 Replies
View Related
Jun 29, 2008
Let me be clear on this: I want to put in a larger drive than the old one, have Windows completely move itself to the new drive, and leave the old one blank - all without Windows' security hackles raising and saying, hey you changed something so you need to re-activate(I don't want to clone. I've done this and Windows has been a POS about it. I want to MOVE the installation.)Perhaps someone has some secret information that this is in fact possible?
View 6 Replies
View Related
Nov 23, 2007
I have this Dell L733r that I installed WinXP on. It also has an internal 250mb zip drive as a slave drive which is on the same cable as the DVD rom installed on [1]. When I installed WinXP, the main hard drive (master) [0] ended up with a drive letter of [e]. The DVD rom was D and the zip drive was [c]. Is there anyway to avoid this short of disconnecting the zip drive? But it would seem that you wouldn't have to discconnect the zip drive.
View 5 Replies
View Related
Nov 8, 2004
I have just installed windows XP on the PC i am writing from and because i foolishly had a camera card reader plugged in and a seperate USB hard drive connected the installation has jumbled up the drive letter allocations.For example what would traditionally be the C drive has the letter F.
View 10 Replies
View Related
Jan 21, 2007
Can I install/repair XP Pro SP2 from an external USB 2.0 DVD-burner drive? I tried it in the past but the installation did not proceed beyond the installing hardware devices phase but then I'm not sure whether that was due to a USB hub or this device?
View 5 Replies
View Related
Oct 26, 2008
I have an nLited XP 64bit CD. I don't have any other CDs to copy over to, but I have a 4GB USB flash drive. I am having a hard time finding stores that either sell floppy drives or external floppy drives. But I need one in order to install my RAID drivers so that my SATA drive can be detected for installing XP on. I have the following setup (Stuff you need to know):Asus Vintage AH-1 barebones motherboard (AMD Socket 939)SATA 80GB harddrive (on RAID using the ULi utility)IDE 80GB harddrive, set to cable select, because this is technically my backup slave driver (too slow to run software from) (Yes, this system is outdated, but I need to make due with what I have until I can build myself the system I want) I need to be able to install my RAID drivers so that I can have my SATA drive detected. I have ideas, but I'm not one to be able to do things about them.
View 3 Replies
View Related
Oct 20, 2006
I installed a Light Scribe CD/DVD RW Optical Drive on my Alienware computer. When I booted it up, it took about 7 minutes to complete. Normally it takes about one minute. Does anyone know why it now takes so long for my computer to boot up?
View 8 Replies
View Related
Oct 4, 2009
Independent Dual Boot capabilities on two separate & independent drives, one on the MOBO EIDE controller the other on the VIA SATA RAID Controller on the same MOBO. I am attempting a clean installation of Windows XP on the SATA Drive but the system fails to recognize even the presence of the drive. This, even after stripping the system of all drives except this one, and after 'prepping' it to be bootable with MAXTOR prep. tools.Was there ever a restriction on putting an O/S on SATA drives even on the MOBO? I have all the updates installed, "I think".
View 6 Replies
View Related
Nov 20, 2008
i got 2 installed versions of XP and one is on my D: drive which is my recovery drive and i need to uninstall that version i know how to do it from the control panel but the problem is i cant log on it its not activated and i don't have the product key anymore but im on the other version installed and it works fine i don't know if there is a way to access the d: drive from command prompt and do it that way or what or the recovery console perhaps
View 9 Replies
View Related
Oct 10, 2006
In my Network Connections it shows nothing. It is just white space. In my system tray, at the bottom right-hand corner of my screen, it shows no flashing computers. This has been so for around five months, I'm guessing. It never really bothered me until lately, and here is what I have done in order to fix it (to no avail, obviously):- Installed all critical Windows updates
- Ran Ad-Aware entire system scan (it's my only anti-virus program)- Tried to make a new network connection, but according to Windows, I have no network hardware, either- Put my Windows installation CD into my CD drive, went to "Install Optional Windows Components," and installed everything network related, then restarted.
View 14 Replies
View Related
Oct 8, 2006
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
View 7 Replies
View Related
Jun 26, 2005
While installing Windows XP, the power went out after about 40% of it had been installed. Now, when I turn on the computer, I get a message that says, "NTLDR is missing. press CTRL+ALT+DEL to reboot." Well, this becomes a never-ending cycle. So, I inserted the Windows XP cd in the cd-rom drive and booted the computer up. I tried re-installing XP and repairing XP. Neither works. So, what I would like to do is completely wipe out my hard drive (nothing I want to save) and start all over.
View 4 Replies
View Related
Jun 9, 2008
I have an external hard drive (150GB) which is partitioned into two parts. One partition , about 145gb, is data and files of my own. Then there is an extended partition at 5gb in size, which contains windows xp installation files. What I did was take my windows xp cd, make an ISO, and then extracted the iso and put the files into the extended partition of my external usb hard drive.The computer I want to install to has a cd drive that is not working and thus i cannot install windows xp from a cd. The BIOS of the computer DOES support booting from a USB device.I have partition magic software and have used it to create the 5gb extended partition on the usb external drive. However, I don't know how to configure anything so that it will acutally know to boot from this partition and what files to use to start the installation.
View 3 Replies
View Related
Aug 5, 2010
I plugged in my WD passport external hard drive into my USB port on my pc that has a newly installed copy of windows xp professional. The new hardware installer pops up, I chose the auto find drivers. Then it copied over called Initio. After that I got another little window asking to give the location of this missing file ivusbWxp86.sys.
View 11 Replies
View Related
Jul 9, 2005
I'm trying to install xp home on my bros comp. he used to have win 2000 pro. I backed everything up and formatted the hard drive. (75 gig ntfs). This worked great. I pulled his hard drive out and put it in my comp (secondary) I then installed xp on it. This went fine, I was even able to boot all the way to xp. The problem comes in when I tried to move the hard drive back to his comp. I could not boot past the compaq screen. I got the error message
"couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
"ntldr: Couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"
View 6 Replies
View Related
May 4, 2007
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
View 7 Replies
View Related
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Jun 10, 2008
When I turn on my PC it goes to boot up then automatically shuts itself off.
View 2 Replies
View Related
Oct 5, 2009
When I first turn on my computer the monitor remains blank and the computer just flashes the CD & DVD lights and I think the HD light is also on but that's it. I tried to press the reset button but nothing happens. If I turn off my power strip and then turn it back on and turn on the computer it boots ok. What is going bad on my machine, the HD, power supply, or could it be the mother board?
View 1 Replies
View Related
Aug 12, 2005
I turn on my pc and it boots as normal and goes to a screen where I have my users shown. Once I click on any of them it starts to sign on but straightaway changes to logging off and returns to the 3 profile screen.
I can get into my desktop if I go through safe mode though
View 4 Replies
View Related
Apr 18, 2005
Everytime that i have such kind of problems above when i try to boot my PC it doesn't boot (Means there's nothing comes up on the Monitor with flashing green light, HDD just run for a while then stop, and there's some wierd noise comes out of my Speakers as well it's like chinese or sth, wierd huh?
With that happens if i just leave my PC for a couple of days and try to boot it again, it boots up but somehow it cannot go into the OS and when i try the Safe Mode, it just show me alot of lines and continous beeping.
View 7 Replies
View Related
Apr 14, 2006
Her computer went into hibernation/sleepmode/standby , and we don't know how to get it back out of whichever one it's using. Nothing boots up on the computer when she reboots and the monitor light doesn't come on.
View 7 Replies
View Related
Dec 26, 2007
I need my PC secured but now it boots up without prompting me for a password.I running XP media center addition 2005.I have not knowingly made any changes to drop my password prompt and I've jump through too many hoops to reset it than should be listed here.
View 6 Replies
View Related
