Installation/ Un-installation Of Daemon Tools That Corrupted Some Registry Files?
May 4, 2007
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
View 7 Replies
ADVERTISEMENT
Jun 10, 2005
First I attempted to install Win XP Home from a cdrom to my C partition (20 gigs, partitioned from either my 120 or 160 gig (forget which) hard drive). However it kept botching up and giving me messages about files not copying properly or being corrupted etc. I cycled through a variety of XP install cds (son's, wife's, etc) without any luck. I tried using either the CDRW or DVD drive, in case one might have been faulty...no luck, however.I figured all of this business probably gunked up the works on my C partition, so I thought I'd better format it and wipe it clean, which I did using a Win98 SE boot CD and loading FDISK. I wanted to partition the 20 gig into 2 x 10 gig so that I could limit the C partition to pretty much only Win XP. Silly me...! Turned out I made a 2 MB partition with the remainder of the partition seemingly unavailable to me...couldn't see it when attempting to view partition information.
View 14 Replies
View Related
Dec 29, 2005
Nothing I plug into any of my usb2.0 ports will work.I get the message 'USB Device Not Recognized - One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. for assistence in solving this problem click this message'Clicking this message inevitably didnt help.This has only happened today, and I only noticed it after installing Daemon Tools v4.0 which I have now uninstalled which hasnt solved the problem. This could of course be a coincidence.
View 14 Replies
View Related
May 5, 2006
First of all, a SUMMARY: Computer (Dell Inspiron 6000 laptop; Windows XP Home) operating extremely slowly; SERVICES.exe using >99% of CPU (Processor speed c. 1.2GHz) I recently installed DAEMON Tools, the virtual drive programme, and when I first opened it, my laptop slowed to a crawl and stopped responding, meaning I'd to use the 'off' button to switch it off (Ctrl-Alt-Delete didn't work).
Since then, each time I've switched it on, it has been operating as per normal but at a horribly slow speed. I have uninstalled DAEMON, but it seems the problem lies elsewhere; eventually I did get the task manager to come up, and (though it took about 5 minutes) switched to the Processes tab. It turns out that the SERVICES.exe process (run by 'System') is using 99% of my CPU.....
View 5 Replies
View Related
May 4, 2007
Some of my system files are corrupted, so I tried to repair Windows XP SP2 by reinstalling. But it was corrupted in the middle because of error "The file 'asms' on the Windows Professional XP CD-Rom is needed". I couldn't go on. The installation is halted. And I couldn't login to Windows any more. I have a very big problem that I'd like to ask you all here. the HD now is readonly, it's NTFS so very few File manager app is used to see it (only Volka in Hiren's Boot CD could do that.
View 14 Replies
View Related
Apr 13, 2005
Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM
I found this soultion online and followed it to the marked point:
View 5 Replies
View Related
Feb 25, 2010
Since January my computer started getting error messages about corrupted files, corrupted registry, and drivers stopped working. I tried different things and ended up formatting my hard drive and reinstalling Windows. Things were fine for a while, but after a week I started getting messages about corrupt files again, having issues with drivers, and now Windows won't shut down properly. Also, the computer powers off of its own accord sometimes. I'm using Windows XP Home Edition SP3. I haven't made any hardware updates recently.
Some of the error messages I've been receiving are. For Bluesoleil (which I have uninstalled and reinstalled) it says that the file is corrupt and to try an anti-virus scan (I tried to copy the message, but the window went off on its own). AVG anti-virus keeps on saying there are no active components, or replacing all the commands with things beginning with @. The drivers for my Logitech Fusion webcam stopped working, but I've reinstalled them, and they work, for now. The Microsoft Kernel Wave Audio Mixer kept on corrupting. I've also had the message 'Windows - Registry Recovery One of the files containing the system's Registry data had to be recovered by use of a log or alternative copy.
View 14 Replies
View Related
Jun 4, 2008
Hoping to find someone who will help me with building 3 or 4 barts PE plugins most of them dont require installation into the windows registry >>> they are small exe programs / example= orthos, core temp monitor, S&M stress tester,
Everest Home Edition
PC Wizard
Sensorsview Pro
once I can get the bootable ISO made with these programs I will make available to anyone for downloading >>>>> should be an awesome computer builders too and overclocking assistant
View 8 Replies
View Related
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Jan 8, 2010
I need to install Windows XP Pro on my laptop. Currently it has Vista. Some people are selling these installation CDs (and keys) on ebay. Can I buy it from there?
View 6 Replies
View Related
Jul 26, 2006
Whenever I try to install something, the window that shows thats its installing closes and installation stops. I restart the install, but it keeps on closing and at different times.
View 6 Replies
View Related
Jul 21, 2006
Dell optiplex gx240, 20 gb, 256 mb p4, I try installing xp pro with the dell reinstallation disk and it will go thru format,creates a list of files to be copied, starts copying files, then stops after about 3-4% and says file cannot be copied. I hit escape to skip file but continues with file after file until windows stops installation. It starts not copying .tff and .dll files. I have changed hds, cdrom,different disk, tried xp pro and 2000 with the same results.
View 2 Replies
View Related
Jan 17, 2005
I recently purchased and installed xp home version update package. can I delete the windows me files without damaging the installation
View 5 Replies
View Related
Oct 10, 2007
I am trying to install Windows XP Prof. and it keeps failing to copy over files right after a format. It never is the same files, it has been about 15-20 different files on about 5-6 tries of installation.It asks you if you want to retry and sometimes that works, sometimes it doesn't, sometimes you have to skip. It says it could be the windows disk, but the windows disk works fine in my test machine and I can install windows perfectly over there.
View 3 Replies
View Related
Apr 18, 2008
I recently bought a new hard drive because my old one was playing up. I installed xp on my new one, and after a few teething problems i got it up and running and transferred all my files and installed the programs i wanted. Whenever i started the computer, i got a message saying that two operating systems had been found, and i could choose to load either my old or new one. I wanted to format my old drive so that i could use it for storage (it wasnt dead, just slow). It didnt let me do that on windows for whatever reason, so i looked it up on the net and someone said to load up from the xp boot cd and delete the partition from there. I did this, but after that it didnt recognise the windows installation on my new hard drive.
So all i could think of doing was to reinstall windows on my old one, which i have done. I know the data on my new hard drive is all there, as i can access it via my computer. my new hard drive is a SATA, and i read about problems with this, indeed i had to load some drivers from a floppy to get it to work in the first place. also i heard about having a master disk drive or something, but in BIOS i couldnt figure out how to change it to make my new hard drive the master. So basically, i was wondering what can i do to be able to load windows from my new hard drive, and once i suceed at that, how can i safely format my old one so i can use it for storage?
View 7 Replies
View Related
Apr 5, 2005
I initially had a problem with java after installing a SP2 update for IE. And eventually reinstalled XP, that didn't correct the issue and then I had to get a new product code because I was in the "you have 30 days to activate" loop even though my copy of XP was already activated.So called Microsoft, got new product key and started to install again. This is when I first got the "Unable to copy files" error. I tried 2 different copies of XP but got the same issue, with the same files, with each disk.I've talked to Microsoft for hours, and finally had a guy tell me it was my motherboard (now this is after having swapped out my memory with the manufacturer). I just received my replacement board (M7NCD by Biostar) and I am still getting the same error. The gist is that at the dsound3d.dll, I start to get "unable to copy file" errors. I attempt to retry the copy, which works occasionally, but eventually I get an error (normally a memory error) Microsoft had said that even with those errors, it wasn't my memory but my motherboard that was the issue
View 8 Replies
View Related
Dec 1, 2006
my dying WinXP system sometimes can be coaxed into booting as far as the recovery console or even into Windows (5 or 6 successive reboots, couple of CHDSKs and so on).Will not boot into Safe Mode(hangs after dumping a page of file names)Will not go back to Last Known Good Config Will not go back to any Restore Points I Have given up on it ....and will go for a complete re-install next ... but I would love to be able to grab some files before I kill it off.
Is there some way I can (forgive the terminology) 'stop the system' the second it passes the Windows Log In screen, it sometimes makes it this far but will not complete installation of all apps etc before dying. I just need basic functionality for 15 minutes to copy some files or maybe there is a way to find the files once in Recovery Console?
View 5 Replies
View Related
Jun 24, 2005
To solve a Windows problem, I installed Windows XP to a new folder. This is also known as a parallel installation. I now have XP installed in two locations, in the WINXP folder as well as the Windows folder. I want to keep the new WINXP installation and discard the old, problem-laden Windows installation.
View 8 Replies
View Related
Apr 8, 2006
Where are the installation files located on the XP CD? So I can copy the files to the hard drive, and then install XP off the Hard Drive.
View 6 Replies
View Related
Jun 21, 2010
I am running Win XP Mediaa Center Edition 2005 and have just received a message on the second boot up page saying:
Windows cannot load because the following file is missing or corrupt:
WINDOWSSYSTEM32CONFIGSYSTEM
You may attempt to recover or repair this file using the original Windows CD
View 2 Replies
View Related
Apr 24, 2010
I am trying to install SP3 on a Windows XP Home (currently SP2). The installation is hung on "Finishing Installation - Performing cleanup". I downloaded the installer from the MS Download center (it didn't appear in Windows Update). Is it safe to turn off the computer (since I can't close the installer), or should I let it sit for a while longer (it's been hanging for a few hours)?
View 2 Replies
View Related
May 14, 2008
I reformat the drives and during the XP Home Discs process of copying files for the installation, the process freezes the system anywhere from 11% at driver.cab to 54% at some random file (i didnt take note). I have tried 2 different XP home Discs (both legal etc.) and two different disk drives, though both are new. and still it is yielding the same result. I have also tried loosening the ram timings to 5-5-5-15 (they are rated at 4-4-4-12). No luck and this is beggining to wear me down.
View 2 Replies
View Related
Mar 28, 2010
First time poster; having an issue with a Windows XP repair installation. More specifically, during the repair installation process I am presented with this error message:"Files Needed The file 'asms' on Windows XP Professional Service Pack 2 CD is needed. Type the path where the file is located, and then click OK. Copy files from: D: . . . " Note that the Windows XP DVD includes Service Pack 2. Also note that when the error message presents, the CD-ROM essentially goes dead.
View 2 Replies
View Related
Apr 28, 2005
I want to know how to repair windows installation without losing ANY files.
View 5 Replies
View Related
Oct 10, 2010
I recently reinstalled XP but I didn't format the hard drive during the process. My hard drive is now almost full because the files and folders were not deleted...and they are nowhere to be found. I vaguely remember an option somewhere to delete files from a previous installation in xp but I can't seem to find it anywhere.I even tried Googling it but can't find it. Does anyone know how I can get rid of these old files.
View 4 Replies
View Related
Jan 5, 2006
I have been having the following problem off and on for some time:
When I try to copy/paste files and folders in windows XP explorer (or in the desktop or a program's dialog box), windows wants to re-install one of the programs I have already installed on my computer or that I installed once upon a time.
Currently this is happening with Roxio Easy media Creator 7, but in the past it has happened with many other programs, such as MS Office, Roxio and some other shareware programs.
View 2 Replies
View Related
Sep 2, 2005
I have a Dell 2350 Pentium4 1.8 gig Running WinXP Servicepack 1. When trying to install service pack2 thru automatic updates, the installation seems to be going fine. Then, while copying new files to the computer (after backing up and setting a restore point) I get a message that says "Generic host proces for Win32 Services encountered a problem and needs to close". The file copying continues in the backround. The standard message asks if I want to send the error to Microsoft. I send it and the file copying continues. After five more minutes copying files an error message pops up:"Access is denied". The system requires a click on "OK" and the old system is restored. I have tried to install several times with the same results.
View 5 Replies
View Related
Sep 10, 2008
I purchased the following system from Costco and was glad I was able to purchase the system complete without having to add components after the sale. I have tried and tried to get used to Vista (6 months) but as I am disabled and my brain doesn't always compute efficiently, I've had difficulties. Mostly with getting things recognized on the small network in my home. My other computers run XP and I wonder if there is not some conflict with the different operating systems trying to access the same files and printers? Finally I just decided to go back to XP..
View 4 Replies
View Related
Aug 12, 2002
Disable the Windows registry editors, Regedit.exe and Regedt32.exe.If this setting is enabled and the user tries to start a registry editor, a message appears explaining that a setting prevents the action.To prevent users from using other administrative tools, use the "Run only allowed Windows applications" setting.START > RUN > GPEDIT.MSC > USER CONFIGURATION > ADMINISTRATIVE TEMPLATES > SYSTEM > FIND PREVENT ACCESS TO REGISTRY EDITING TOOLS > RIGHT CLICK > PROPERTIES > CLICK ENABLE > OK > REBOOT
View 9 Replies
View Related
Dec 23, 2007
at first my PC was making funny effects. The screen goes blank and no screen comes out after XP finishes booting up. Frequent reboots were needed to get into XP. Didn't care at this stage as i was able to still do my work.
After few weeks, the PC goes mad with BAD POOLER CALL errors and restarts and i could not get my way into XP same goes for Safe Mode. So i decided to repair my XP...
It all goes fine, when installation goes halfway at "Copying files..." screen goes black, DVDROM goes disco in the LEDs and the PC restarts by itself. This happens endlessly.
View 1 Replies
View Related
Sep 7, 2006
I rebooted after a software install and could not get back into Windows. The machine just does a continuous reboot after the XP Splash Screen. Finally got it to give me a corrupted registry file error message. After googling, it seems this has been fairly common occurrence. A simple repair install, right? Well, my OEM version of Windows does not give me a repair option(something else that many people have found with all different versions of Windows) I can get into the Recovery Console but this is not
what I need. When I skip the RC and press F8 at the Licensing Screen I can get to the "Repair Screen" but when I highlight the installation of Windows to repair, THERE IS NO REPAIR OPTION, only a INSTALL option and pressing 'R' does nothing
View 2 Replies
View Related
