i`m using maxtor 200gb divided into 4 partitions c: is for the operating system and d,e,f only data. i want to reinstall windows only on c: cause i think the registry is pretty sick CAN I FORMAT ONLY C: DRIVE AND REINSTALL WINDOWS WITHOUT CAUSING ANY DAMAGE TO D.E,F DRIVES?
I need to get my HDD reformatted with the help of a paid technician.Couple of weeks ago he used the quick format method & asked him if that would make any difference & he said really not.I have the doubts though. I kind of wonder why would Windows then give a choice if there really wasn’t any difference?
My 20 GB HD is the master. everything was installed properly and I had no problems. Yesterday I decided to change computer cases so I decided to transfer everything to the new case. I checked and tripple checked the hardware hook up. Every button and light works properly. When I turned on the comp, it would try to load and then it would turn off and restart on me. Thats fine, I figured I could use a format. So i put in the Original XP CD to format. Took me to the usual blue screen where it loads its drivers at the bottom, however after it loaded the Press F6 to load Raid drivers and Press F2 to do whatever, it froze on me. I can't understand why. BIOS loads everything, and it recognizes everything. I tried the whole put in the windows 98 or ME boot disk, but it would not load the drivers and then it would load from the XP cd. And yes it was set to boot from A: drive first.
How do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
Just formatted my computer, and now i want to install my windows, but when i am installing it, installation does not copy all files. setup canot copy the file: comctl32.dll and after installation i get a message winlogon.exe unable to locate component. and nothing happens after.
My Pc, Is Full Of Useless/Corrupt Stuff Now.It Crashes Regularly.I Have Formatted The Secondary Partition Without Problems, But To Format The Primary, You Need The Windows Disc. Is There A Way Of Formatting Without Windows Discs Or Expensive Third Party Programs?
I have formatted the drive on my laptop and reloaded the programs from disk (XP) and have a few questions. 1. Reloading the programs from disk was pretty straightforward but downloading and installing the Windows service packs, updates and patches etc took hours (on broadband). Can I back up these updates to disk so in future I can save all the downloading time and what exactly do I save? I looked in the files and just don�t know where to start! 2. After loading the various programs from disk and a few others such as AVG, Zone Alarm etc but prior to downloading the Windows updates the disk space used was about 3Gb. After downloading the service packs etc the disk space used jumped to over 9Gb! (yet, when I add up the individual folder sizes, it comes to only 4.4Gb) Do the Windows updates take up an extra 6Gb? And where are they hiding?
I need to re-format my hard drive. I cannot do it throught the MS-DOS prompt in Windows XP Home Edition due to the File Structure on the hard drive. Is there any way to bypass the Windows boot and go directly to a MS-DOS prompt on start-up?
I have a Toshiba Portege running Windows XP Tablet Edition. and those of you who own them know they don't have a CD drive.I forgot my passwords and I cannot figure out what they are. I have the files on my other laptop to format it. But the problem is I don't know how to do it without a CD drive.I want to try it from my 1 gig thumbdrive but I can't find a good guide to be able to put it on there and format it.
I want to do a clean sweep on my hard drive. What is the best way to do this? Should I use my XP set-up CD or start the process from the command prompt? Also any suggestions on what programs for spyware, malware, etc. that I can run with Trend Micro's Internet Security?
I need help with formatting in XP. I was just curious if I could format a 16mb drive and card (JAMP3 player) to a Win98 Fat16 using XP? Apparently the thing won't work otherwise. Of course I could rebuild my old PC with Win98, but trying to avoid that.
I want to FDisk or Format my hard drive. When I open the Command Prompt (W2K), and enter FDisk (from the root, C:), it doesn't recognize that command. When I try "Format C:" and then provide the Volume Label, it says: Volume in use by another process. Format may run if this volume is dismounted first. ... Would you like to force a dismount on this volume?" I answer Y, but then get: "Cannot lock the drive. The volume is still in use." What can I do to "unuse" the volume?
I've tried to install fresh version of Win XP pro. However, as XP tries to format to 100%, before formatting is complete, I get the error saying it cannot format the drive due to "drive damage." At first I thought it was because I had a dead Hard Drive. So I then used a spare drive I had on hand, but again got the same error. I then went out and got a brand new one, but again, got the same error. I now don't believe the hard drives are dead, but something else is wrong. I've tried using another XP home disc I had, and got the same error.
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
I installed Windows XP SP2 Professional on it like a week ago. But instead of erasing everything on it, the computer now gives me a choice between booting with Windows XP, Windows 2000 which I installed a while ago, and just Windows which is ME and has been there for a long time. Now I just wanna format the hd, get rid of everything, and start fresh with just Windows XP.
So I tried going to Command Prompt and typing "Format C:". It gave me the whole this is NTFS, type volume label and its gonna delete all data are you sure, I did all that. Then, it said " Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first. ALL OPEN HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? <Y/N>. I said yes. Then it says " Cannot lock the drive. The volume is still in use.
this might seem a lame question here but can someone please tell me how to make a Bootable CD so i can boot my computer from this bootable CD and reformat my C drive without using my windows cd.
I have Vista,I have another drive,but it's currently not available to use.What I want to do is to get a Cruzer Micro 2GB,and format it to have a bootup for Windows XP. Would it permanently damage the flash drive in any way?
my parents pc was running super slow, like taking 10 mins to boot which it never use to, so i decided to format. All was going how it normally does when i fix computers and then it gets to 3% of formatting and suddenly jumps to 12 then gets to 100% really quickly and states format could not complete as the drive is corrupt, pick another drive.
So i restart try again same thing happens, ive tryed unplugging the cables etc but none of it works.
So i figure the drive must have something wrong, load the recovery console via the disk and trying do a chkdsk where i get the message
I am officially past aggravated. I needed to reformat an internal hard drive on a Gateway Laptop 7322GZ, 60GB drive. I am using a Windows XP Pro Upgrade CD (along with a full version of Windows 98SE for verification) and I deleted all partitions and set it to format the entire disk. Did not select quick format NTFS, just regular Format NTFS..
Am trying to do new installation (clean install) of windows xp pro and cant seem to get the option of formatting the drive.All it seems to do is rewrite over the previous installations(even though I choose new installation option).Since trying to reinstall I also keep getting the error "cant find c:windowssystem32oolsdelfolders.exe." It doesnt seem to be causing any problems as such as I can still use my computer but I would really like to format and get rid of any crap.Any ideas?Also clicking on C
how to reformat my hard drive? I'm trying to load XP Pro but when I put the disc in it tells me that the version on my computer is newer than the one I'm trying to put in so it can't install it. So how do I format from XP Home edition?
i have an old computer that has windows xp professional on it and i would like to format the hard drive so nothing can be recoverd because we are going to though the computer
i have a system that is running xp and i need to format the hard drive due to a new mobo. in the past i have tried and i ran into a problem that you already have an os installed. what is the best way to format in xp?
I'm having problems formatting a hdd to install Winxp. A friend gave me his old HP 743a comp (2.4 Ghz, 512 mb ram) because the monitor kept going black. I am fairly sure the problem was one of the CPU heatsink clips was broken and not allowing contact between heatsink and cpu. It doesn't go black now that I have fixed the clip. He removed his HDD, so I bought a second hand 10 Gb just to see if I could get the thing running. I formatted the HDD with a win98se boot disk. Everything goes well except I can't get the "start with cdrom support" page to come up. The Cd drive is a CD-RW/DVD combo drive (32 x 10 x 12 x 40x). Sorry I can't find the brand and model number at the moment. I did check up on it a week ago and it's only supported by win2000 and winxp. I was wondering if this could be the problem?
I need to format my harddrive and re-install XP pro, but I don't know how to do it, do someone out there know where to find an easy guide to boot from CD. Cause it would be nice with a print so I can format my computer step by step. I'm not so brainy when dealing with BIOS.
i just got a new harddrive and i am not able to install windows xp on it.the harddrive is a 250gb ide. scandisk shows nothing. after running the xp setup from the cd, it copies the files and reboots, after which i get the message: "A disk read error occured, press ALT CTRL DEL to restart".i can't format the drive, its got a lot of important data on it.
I need to format a laptop and boot as C:drive only don't need windows software. just clean boot disk.anyone know what software to use to format clean c:drive and load to c:drive .
I have made a boot diskette , added smartdrv , but won't accept the smartdrv command, I'm slowly going crazy How do I get to BIOS, and how do I configure to startup from cd drive ??