Just formatted my computer, and now i want to install my windows, but when i am installing it, installation does not copy all files. setup canot copy the file: comctl32.dll and after installation i get a message winlogon.exe unable to locate component. and nothing happens after.
i`m using maxtor 200gb divided into 4 partitions c: is for the operating system and d,e,f only data. i want to reinstall windows only on c: cause i think the registry is pretty sick CAN I FORMAT ONLY C: DRIVE AND REINSTALL WINDOWS WITHOUT CAUSING ANY DAMAGE TO D.E,F DRIVES?
My 20 GB HD is the master. everything was installed properly and I had no problems. Yesterday I decided to change computer cases so I decided to transfer everything to the new case. I checked and tripple checked the hardware hook up. Every button and light works properly. When I turned on the comp, it would try to load and then it would turn off and restart on me. Thats fine, I figured I could use a format. So i put in the Original XP CD to format. Took me to the usual blue screen where it loads its drivers at the bottom, however after it loaded the Press F6 to load Raid drivers and Press F2 to do whatever, it froze on me. I can't understand why. BIOS loads everything, and it recognizes everything. I tried the whole put in the windows 98 or ME boot disk, but it would not load the drivers and then it would load from the XP cd. And yes it was set to boot from A: drive first.
How do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
My Pc, Is Full Of Useless/Corrupt Stuff Now.It Crashes Regularly.I Have Formatted The Secondary Partition Without Problems, But To Format The Primary, You Need The Windows Disc. Is There A Way Of Formatting Without Windows Discs Or Expensive Third Party Programs?
I shut off the computer and turning it back on couldn't boot up windows. It gave the windows wasn't shut down properly and I tried the normal restart option and it would just give a black screen with a blinking _ and then nothing happens. Tried loading in safe mode but it gets to mup.sys then "Press Esc to cancel SPTD.sys" flashes below and whether I press Esc or let it be, nothing happens after that.
I tried popping in the windows xp disc that came with the laptop, boot from disc, it starts up but then after loading everything, it then says "Windows is starting up" the disc stops spinning then nothing happens. I tried popping in a windows vista disc and it says "Windows is loading files" with a progress bar, when it fills up, I get stuck with a blank black screen the disc stops spinning and then nothing happens.
Some how my small brother was trying to cure his pc prbs but in this he installed 2 win xp Now it comes options 2 chose either XP in startup... Pls tell me how do i remove one XP. I dont think i m repeating topic (sorry if i am), bcoz on net ppl suggest to format drive while i cannot format it, just want to remove one, both are working fine, how can i do that ?
I had some problems with my C: drive, and a friend who knew a lot about CPU's helped me a bit, here's what he did. He came over with a restore disk from his CPU, (even though we have different cpus) and it had Norton Ghost on it....when it booted up, it acted like a normal boot disk, and asked if I wanted to restore Windows XP, right along with Formatting my disk, we clicked yes and the Ghost program started. Only, it got done with about 16% of the format, the CD itself looked like crap, with a bunch of scratches on it...nothing really serious, but serious enough to stop the format. I tried cleaning it off the best I could, but to no avail. So thinking that the format failed, we could try something else, but the drive C: was already formatted, and when I tried to start it, this is what it said, "NTLDR is missing, press control+alt+delete to reboot.
I have Vista,I have another drive,but it's currently not available to use.What I want to do is to get a Cruzer Micro 2GB,and format it to have a bootup for Windows XP. Would it permanently damage the flash drive in any way?
I tried to format my windows XP but it gives me the following message "windows did not find any hardisk installed in your pc" it is not the exact words but it is something close to it in other words windows could not find my hardisk
Laptop has become heavily virus infected and needs to be formatted. I do not have original operating system disk. It is out of warranty also. It does not boot up always. How can I format it in order to reinstall windows xp.
I did a clean install of Windows 2000 Pro on my Toshiba Tecra 8100 laptop. My hard drive has a capacity of 11gb. After the clean install I only have 4.8gb left on the hard drive. I have followed reformatting instructions and installed again, but get the same result. It is taking forever to test different suggestions, since I have to keep reinstalling. File system is ntfs. A good portion of the gig being used is in Documents and Settings, but I thought that should get wiped out. I don't understand why I am still seeing folders for iPod, Lexar, etc. I have burned 16 hours on this.
Recently I found System Restore not working. It would neither restore to an earlier time nor create a new restore point. I tried doing a virus scan using Avast, rebooting, checking that it is (supposed to be) running and safe mode.Disconnecting from the Internet and turning off antivirus and firewall also made no difference. I also turned it off and on again. I noticed that initially it said it was monitoring drives C, D & E but after turning on again it only showed drives C & D. These drives are all partitions on my HD.On checking E I found that it had no file system and was advised to format it. On attempting this I got Format did not complete successfully.I also attempted to Defrag and got Disk Defragmenter could not start.
Can anyone advise me on formating or reformating my hard drive. I am running windows xp pro and have a 20 gb maxtor hard drive. This is formatted as NTFS as one partition. I tried from windows explore and from my computer. I also tried to change to 32 bit partition. Can I do this with fdisk, if so how?
Without going into too much detail. My hard drive has XP O/S on it. All I want to do is to format it. NTFS. So I have a clean hard drive with no operating system on it. How can I do it?
I have windows 2000, it is driving me crazy!! I have tried everything, but it is not responding correctly, and it is extremely slow. It needs to be totally cleared out, but I have never done it before.
Seeing a decrease in performance in my PC after a few months(as expected from wear and tear over time), I have decided to reformat my PC to bring it up to the new PC feel and speed. Before formatting, is there any programs that might give my PC the older performance that it once had? If not any one have any suggestions on methods of keeping performance high as long as possible, as in portioning the hard drive, or keeping my startup programs at a low, Um some one of constant clean program, keeping in mind I mainly do development with 3d max, flash combustion, and gaming.
I need to get my HDD reformatted with the help of a paid technician.Couple of weeks ago he used the quick format method & asked him if that would make any difference & he said really not.I have the doubts though. I kind of wonder why would Windows then give a choice if there really wasn’t any difference?
I have 65 Computers need to format and install new window for the deployment this weekend. But unfortunately, 3 of these computers cant format and install new windows using installation cd. It can detect and boot from cd but when I hit any key botton to boot from cd after a minute the installation screen turn black then stop installation but the machine is still up.
Okay, i have posted thios at heaps of forums and they wont give me any useful info. So now its your turn :P I have windows xp cd. But it will not boot up. The bios is correct, and the cd is in there etc. It says press any key to boot, and i do.It detects some stuff then restarts and loads into my desktop Doesnt do anything. I have tried another version of windows xp pro. Same thing.I want to reformat, i need to reformat. This dialer is costing me money.
I'm running xp home edition on my dell system. When I tried to boot up, the screen went black and I got the system error message. From there you can only click ok, the system reboots and goes thfough the same process. It also does it in safe mode. I've tried to use "the last known working configuration" from the f8 screen, same thing.I was going to try a repair install, but for some reason I have a xp pro disk, not home edition. Can I do a repair using this disk (it's a dell disk)? Or am i going to have to wipe everything out and install xp pro to get the system to work.
Is it possible for me to use the system repair tool (the one that comes up when you boot from the Windows XP CD and press R at the menu) to format only a specific partition on a hard drive, or do you always have to erase the whole drive.
I have WIN XP PRO SP2 on my system. I have a 120G Harddrive. is it possible to reformst to a dual partition, 50% WIN 98 SE FAT the other half XP NTFS ? I dont have my original XP disk So I dont know if I will be able to reinstall my XP off of my backup disc.
I think I need to change my operating system! I have a Compaq Armada E500 laptop, 4GB, 2.81 GB of used space, 1.18 GB of free space, running on "Windows 2000 Professional" ("Built on NT technology"). I'm having problems downloading certain softwares, it seems "Windows 2000 Professional" just doesn't let me do it. Plus, I've found there's other things I just can't do with it. I've been told Windows 98 is the best way to go for me + it'll free up some more space (you can see my laptop has very little space) + it'll let me download the softwares I need with no problem.
In a thread in security flrman1 11-Mar-2005, 06:03 PM #54 "If your computer is 3 yrs old and you haven't reformatted the hard drive and reinstalled XP, you're way past due."#56 "Typically with XP, it needs to be done after about 1 1/2 to 2 yrs, but there are a lot of variables there and there are those that do manage to go longer."
My new system has an unusually high level of cpu usage after startup. Windows was only installed a week ago and I haven't installed much software on this yet. Today was the first day I got it online and all I did was install the newest windows updates. The only things I've installed in it are nero, omega radeon drivers, videolan media player, winamp, and adobe.I've looked at the hijack log and I don't see anything out of the ordinary. The odd thing is, the cpu usage isn't constant, it ranges from 30%-50% even when nothing is running.
He took it home tonight because its being playing up over the past week and yesterday it refused to boot xp. He tried the recovery console himself and im not sure what he did but upon starting the computer up xp immediately jumps into "reinstalling windows" at the install stage. It gets down to 33 minutes and the computer restarts and repeats the whole process. I cant format the drive as theres important work on it and im not going to be able to take my computer home till next weekend. I was hoping someone could offer an alternative solution to a format?
I recently bought a new computer and had windows XP installed as well as having Norton AntiVirus program installed (came with a package). Now, when I try installing a HP printer the installation CD does not work but when I try it on my laptop it does work. Could it be the norton blocking the CD installation? What would I have to do in order to fix this problem.