My notebook froze overnight. While rebooting my notebook, I get: No hard drive found error. After several reboots, I get CANNOT LOAD OPERATING SYSTEM. I insert the XP CD to repair XP - No Go. I insert the XP CD to do a fresh install - it tells me to format my hard drive. But I need the data on there. Never happened before - and I am lost.
View 2 RepliesOn my first attempt to boot, the hard drive is not detecte On the second attempt, the bios always sees the hard drive and boot up is normal.I have tested the Seagate hard drive with the Seagate hard drive support tool and all is error free.This is consistent. I can't find anything in the bios where this would be switchable.
Boot up order is:1. DVD drive 2. Floppy drive 3. Hard drive Sony Vaio PCV-RZ22G.Windows XP Home. P4-2.4 1 gig ram.
i have a dell deminsion 4550 i was given. it has a pentium 4 2. 4GHZ sounded like a good machine. nut it's not i wanted to put in a newer hard drive with xp pro just like the original and it won't boot. the original was 30GB the new is 40 (40 the max for the machine?) the origanal is from 2002 the new from 2005 both maxtor diamond max 3.5 series. there online support for sayed it wont work. i know i tried but this is wired becuse almost any other computer you can put in a hard drive and it will boot
View 23 Replies View RelatedWhen starting my computer, I have started getting a "Hard Drive Not Found" error on the black screen just as the pc starts booting up. I've not written down all the details, but I see the MAC address displayed and a cursor blinks just after the letters DHCP, there is something about "boot filename not received", then "Hard Drive not found" and then it defaults to the Windows boot screen and will boot up fine. The pc seems to run normal once up...but, I'm somewhat concerned about a "Hard Drive Not Found" error. It just doesn't sound good. I'm going to try to get more specifics as to what I'm seeing on the boot screens, but wondered if anyone here might have some suggestions as to what my issue is?
My pc specs should show in my signature. Also, I recently upgraded my graphics card, but that's the only hardware I've been playing with lately. Don't know if that would make any difference because I wasn't getting any trouble until now and that graphics card has been in about a week already.
I had to purchase a new hardrive for a Dell Inspiron 5100. I am just wondering how to go about the Windows reinstallation on a Dell. Do I just plug in the reinstall cd like usual and go from there? I know this might be a Duh question, but it's a Dell.
View 6 Replies View RelatedI have a Dell Ispiron 5100 running XP professional w/512 MB RAM (w/24 Gig free space) and lately its been taking a long time to boot up.I log onto to my user account and then then wall paper shows up. After about a minute, my desktop icons show up and then the hour glass starts running. 10 seconds later I can actively start using me pc.All told the start up process takes about 1.5 to 2 minutes (I've timed it)
View 3 Replies View RelatedDell Inspiron 5100 running Windows XP Pro. Using the power cord the screen is bright and vibrant. On battery power the screen is noticably darker. What setting needs to be changed?
View 6 Replies View RelatedI did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
View 6 Replies View RelatedAn external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies View RelatedOk, I'm stumped with this problem. My pc was working fine, I believe my mother may have downloaded a virus but avast didn't automatically stop it so I don't think that would have anything to do with the problem. She shut the computer down for the night and the next day went to get on and when it starts up after it shows a dell splash screen saying push F2 for setup and F12 for Boot loader. it goes to a black screen that looks like some thing you ssee when the computer doesn't have an operating system. So I rebooted and hit F2, it sad entering setup and went straight to the black screen. It would not let me into bios. I decided that it may be the hard drive so I took it downstarirs to my other pc and plugged it in an I was able to browse the files on ubuntu. I thought I would test something so I grabbed the Ubuntu Live cd and put it in the computer upstairs, this time when I pushed F2 it went into bios, I set it to boot from cd and restarted, Ubuntu loaded and I am currently using it to type this post. the computer is running off of the Live cd only there is no hard drive plugged into it. Before I typed this but after the first time i got the computer to boot with ubuntu I reinstalled the hard drive. and with the computer still set to boot from cd first it went to the black screen and i could no longer get into bios untill i removed the hard drive.
View 1 Replies View RelatedWindows XP SP2.I have recebtlky suffered from various Malware and suddenly I have a message Invalid boot.ini booting from C:windows.When I try to recover from CD I get a message that it doesn't recognise the hard drive. Theerefore no restore. I can use my PC but it will re-boot sporadically.
View 21 Replies View RelatedOK,i need some help here,after changing desktop casing,I noticed that my 2nd IDE Hard drive/HD is not on "My Computer",check on the Device manager HD is present and when i tried to see the details of my HD on Disk Management HD is not present,so I've rebooted HD is present in BIOS.Things I did:1.Fix windows using recovery console2.Connect/reconnect cables3.Check if HD is still working(100% sure it's working)4.Updated driversAdditional info's"HD is Seagate Barracuda(Master-Slave set up), OS Windows XP sp3**Please note that i can't see the HD on my disk management like any other people would do to fix this problem***If anyone has any other ideas, please let me know. I'm going to attempt trying the drive on a different IDE hannel, and see if that works.
View 2 Replies View Relatedmy computer running slow and now, my computer has completely failed me.It's a Dell Inspiron 9300. About 4 years old. Without finding a way into it, I can't tell you much else. The only thing I downloaded today was HJT so I could post a log on the other thread I have up. fell asleep on the couch, and when I awoke, there was a lovely blue screen with some gibberish about "if this is the first time you have seen this screen, restart" and when I did...BLACK SCREEN and this horrendous clicking noise coming from the lower right-hand side of the unit. I should also mention the unit was so hot to the touch I nearly burned myself. Literally. It's gotten hot before, but this was honestly stove-top burner hot
View 3 Replies View RelatedI have a Dell XPS 400 and I'm running off of a 500 gb barracuda harddrive. Here's my problem. When I try to boot up my computer I got the following error a second or two after the windows logo shows up "A Problem has been detected and windows has shut down to prevent damage to your computer." The error code is STOP: 0x00000024 (0x00190203,0x85D97A98, 0xC0000102, 0x00000000) When I insert my windows disc, I get the following error "Setup did not find any hard disk drives installed in your computer". I searched online and attempted to integrate my harddrive drivers onto my windows disc. This is the source from which I got my drivers http://support.dell.com/support/down...&fileid=173456. I then proceed to use a program called Nlite to create a new windows disc, and burnt that disc using a program called imgburner. When I use that disc and press F6 during set up I get the following message "Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter.
View 14 Replies View RelatedA few days ago my hard drive crapped the bed so I bought a new one. I was wondering if I should do something different than what I was gonna do. I have the original Dell Windows XP SP1 cd that came with my Dell computer. I am going to install it on my new hard drive. After I do this should I go to www.microsoft.com and download the SP2 or should I do something different altogether? I just wanna make sure I have all the windows security updates on the new hard drive.
View 9 Replies View RelatedI recently got myself another hard drive, that I wanted to install in my computer. From before, the computer contained a hard drive and a CD-burner. I do not have instructions on how to set the jumpers on the new hard drive to make it master or slave, so I had to try my way. I figured how to make it master, so the present configuration is that this new hard drive is secondary master, and the CD-burner is secondary slave. BIOS recognizes this, but unfortunately Windows does not seem to find any of the devices on the secondary controller with this configuration.
View 2 Replies View RelatedMy son has a Dell desktop 2.66 ghz. It has XP home on it. I have reinstalled XP twice but it does not come up to reformat the hard drive. At the partition stage it says nothing about formatting. I cannot delete the main partition. How can I format the harddrive? I am using the Dell version of XP that came with the computer
View 4 Replies View RelatedI created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
View 3 Replies View RelatedI just tried to install a new hard drive into a dell dimension 8100. It appears the motherboard is shot and so I am just going to use this new hard drive for storagew and I just want to remove XP off of it. Is it best to FDISK and if so how do I do that on XP? Is it the same as on the other operating systems or is there a better way?
View 1 Replies View Relatedi want to format my hard drive , i do have dell inspiron 1150 laptop
View 6 Replies View RelatedReplaced old wd 160gig serial ATA HD with WD5000AAKS sata HD on Dell Dimension 4600. When trying to install XP, get error: filei386halaacpi.dll could not be loaded. The error code is 7.
View 3 Replies View RelatedI was running XP professional but got hacked or a virus and did a complete hard drive wipe out and then installed XP home. Now it does not find, or is having a conflict with, my ethernet controller, audio device, system management bus and VGA. I can probably download updated drivers for the other things if I can get it to load a driver for the ethernet, but since I can't, I am pretty well screwed. I would appreciate any help from anyone who is at all familiar with the Dell Dimension 2400.
View 14 Replies View RelatedI will try to make this brief. I have a dell dimension 2400 that the hd went down. I have a like new IBM drive installed, the bios recognizes it, however, I cannot get the computer to re-install the cd that i have from dell to reinstall xp. i have the boot sequence to start with the cd, however all I get is press f1 to try again, for f2 for setup.
View 5 Replies View Related800 MHz processor PC with 256MB RAM and a WD hard drive. She runs Windows XP Professional on it. She walked away from her computer for awhile, and when she came back there was a black screen on it saying basically that it couldn't find any of the devices that are actually attached to the computer i.e. hard drive, CD-ROM. It also said boot record not found. So I decided to have her try the Windows Recovery Console to try and help fix the boot.ini file. Well, when she typed in the command, it didn't work and said invalid entry or system drive not found.
View 2 Replies View RelatedI changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies View RelatedI ran a scrub program to clean up a VISTA machine. then tried to load XP. Got a message about "not having drivers for the hard drive".
View 5 Replies View RelatedI reformatted the hard drive and tried to install XP home Edition for my Latitude D600, but keep getting different error messages, I thought it was a faulty operating system disk, but I've tried three different disks.This is not the first time I've reformatted desktops and laptops.
View 1 Replies View RelatedHad a major crash and now can not install windows on the Dell pc as it can not see the hard drives anymore.
Installed a brand new hard drive and still no luck just says can not locate a hard drive to install windows on, done a check in the bios on the hard drive and it says it's fine but can not see it on the fresh install.
I just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
View 6 Replies View RelatedI recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"