System & Boot Volumes On Separate Hard Drives
Jun 25, 2010
I recently bought a new HDD because the old one appears ready to crash (clicking sound). My DVD-Rom is also dead, so I booted from the old hard drive & installed a fresh OS (Windows XP) on the new drive. However, I cannot boot from the new drive alone, because the 'system volume' is Drive C: (old drive) & 'boot volume' is Drive G: (new drive). How can I fix this? I don't mind reinstalling the OS, but I cannot boot from a CD & I don't know how long the old drive will last
View 5 Replies
ADVERTISEMENT
Jan 6, 2007
Now I cannot boot without the 120GB plugged in (tried unplugging the drive and booting and it said the it was Unable to boot from disk or something). I eventually deleted the partition on the old drive in setup and then canceled setup, and I still couldn't boot. So I reinstalled winXP on the old drive and now it boots fine. Of course what I have to do is reinstall XP with the drive unplugged, but do I have to completely redo everything, or can I somehow reinstall without starting from scratch? I've tried using the setup disk in windows with the drive unplugged (I know it isn't safe to unplug drives with the computer running but I had run out of ideas), but it said that it couldn't reinstall windows because there was no valid System Partition (which is on the other drive.
View 6 Replies
View Related
Aug 14, 2007
this is part2 of my dilemmas - after finally getting my recognise the rest of 250gb hdd - not it wants to treat them as 2 separate drives - is there anyway of joining them together so I have 1 drive
View 6 Replies
View Related
Jul 23, 2003
Is it possible to dual boot between to different hard drives both running Windows XP? I just bought a new hard drive and I want to install it on the same machine and have a drive just for me and my wife and the kids can have their own. They down load so much stuff and cause the system to boot and run so slow. I'm tired of restoring it just to find 2 weeks later it's like it was.
View 2 Replies
View Related
Mar 19, 2007
I have two hard drives with different speeds the primary is 7200 the slave 5400, but my computer sometimes will not boot first time in the morning. I have to close it down after my screen turns off to power save. Which is the best way round for the drives to be installed or could it possibly be something entirely different that is causing the problem please. I have no virus or malware on my computer and all automatic updates are applied on windows XP SP2.
View 8 Replies
View Related
Dec 18, 2008
I have tried without success to delete a folder from my separate hard drive which I beleive is corrupted in some way. I have copied it elsewhere and it runs fine. I have deleted all the individual files (jpgs) and the details show no files remaining. However I get an error message which tells me I cannot delete the folder as the the directory is not empty. I have tried chdsk and to show hidden files with the Tools command but without success. Any ideas? The folder seems to make my hard drive whir and run very slowly hence my desire to get rid of it. I am running Windows XP with SP2 but mt computer skills are limited!
View 7 Replies
View Related
Sep 28, 2010
I have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies
View Related
Aug 12, 2005
I seem to have three separate Trojan viruses running in my computer! I was
told that I need a new hard drive to get rid of these viruses. Is this true?
Is there any other way to get rid of this problem?
View 9 Replies
View Related
Sep 5, 2009
I was running windows on an IDE hard drive and bought a new SATA and installed a fresh copy of windows on it, now having a dual boot with the old installation on the IDE. I've been running on the SATA drive for a few months now and I want to remove the IDE drive from my system but when I disconnect it and reboot I get a message that tells me NTLDR is missing so I am assuming that the boot record is on the IDE drive. How can I make the SATA drive my main boot drive?
View 2 Replies
View Related
Feb 10, 2006
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
View 2 Replies
View Related
Jun 27, 2008
I reinstalled and reformatted my hard drive, and the other one inside.I have a drive calledC: (Boot) SATAII - XP on on itD: (System) IDE - Just Data on itI reformatted C and D.The C: seems to require D: to load XP though- Is there some boot.ini to fix this?- I tried changing the BIOS order but that wont do any good.It appears they now work together and windows won't boot without the other drive.
View 2 Replies
View Related
Jul 7, 2005
computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
View 5 Replies
View Related
Oct 22, 2008
I have installed a new hard drive and installed a new XP Pro on it. I kept the old XP Home for some time untill I'm happy with the new installation. The old XP Home was on drive C and the new XP Pro is on drive E. I am now ready to reclaim drive C disk space and tried formatting it. However, it appers as the "system" drive, while the new HD (E) appears as "boot". I realized I wont be able to format it until I make E drive system and boot together (which usually appears as "system"). Eventually, I would prefer that the new disk will be labeled C
View 1 Replies
View Related
Aug 5, 2009
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies
View Related
Jul 22, 2008
i have 2 sata hard drives and i need to know how to duel boot windows xp home with windows server 2003?
View 7 Replies
View Related
May 19, 2007
The Dell 8250 Pentium IV computer will not recognize the new master 160 GHZ or the origional, now slave, 40 GHZ, Hard drives. All the connections and jumpers are installed correctly. I tried a new motherboard and a new cable, both did not resolve this problem. Even ran a diagnostic program called "Tuff Test", running at boot up and the RAM and all other items checked OK, showing all working properly. The BIOS, now set to boot up correctly, off the proper drive, seems to recognize both removable drives and the floppy, but not the hard drives.
When I received the computer it was password protected. after asking and waiting for a week, with no response, I therefore, in safe mode,entered the BIOS and chose for it to boot off of the CD Rw that I thought was the proper and shut the Hard Drive off. Here the CD RW was a slave and not the master. No luck in installing the OS. I bought a new 160 GHZ HD with the thought that I could load the OS, again no luck. I replaced the battery and tried again with no luck.
View 1 Replies
View Related
Jul 23, 2005
I have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
View 3 Replies
View Related
Oct 3, 2006
I know it is possible to stop auto-mounting of volumes and partitions with Windows Server 2003 by using MountVol or Disk Part.But how do you do it in Windows XP? The options are not available in either utility.
View 6 Replies
View Related
Dec 13, 2007
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies
View Related
Jul 17, 2005
I have a 2 hard disc system, Windows XP pro and most programmes run from the C Drive. A few, plus all my data run from the F drive. Over the last few days I have encountered a massive slowdown in getting the computer started - form certainly less than 5 minutes to over 20 minutes. I have not added anything to the autoruns at all.
Programmes and data (eg music) run fine if they are on the F drive, but if they are on the C drive they run incredibly slowly so music is fragmented and at times its like trying to wade through treacle to get anything done. I have been getting crashes of the PC with a message about a kernel problem... but haven't yet copied all the data from that to get the detail. When it crashes the next boot reports a disc boot system failure, when i reboot ahgain it loads up but painfully slowly. The C drive was defraggged just afew weeks ago. I'm thinking the drive is about to pack up....
View 10 Replies
View Related
Mar 4, 2008
I had to do an reformat on my PC. Before the reformat, my PC read both my external hard drives no problem. Then after the reformat, it only would read one. When I would restart with both connected, it wouldn't budge from the welcome screen. After I would unplug the "questionable" one, it would then allow me to log in as usual. I think it could be a driver issue but I'm not totally sure because it does read it after a little while. I changed the USB cable, so for now, it is holding. Can anybody figure out what it might be?
View 2 Replies
View Related
Jun 26, 2010
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies
View Related
Oct 4, 2010
Trying to help daughter with PC problem. She has a Dell Optiplex GX260 running Windows XP Pro. For some time she has been having problems: freeze ups and other noxious behavior. When trying to open email attachments, tabs start appearing and keep on appearing until the PC is turned off. Finally, it stopped booting to Windows. When it is powered on, the Dell logo window appears briefly, then a black screen appears with a cursor top left.
View 2 Replies
View Related
Feb 22, 2007
I have Windows XP home edition already installed on my system and I for some reasons I want to reinstall them on a different hard drive (I have 2 IDE drives). It is very important that my initial windows setup, the one I am running on now, will be working after the new installation too. Is that possible?
View 5 Replies
View Related
Nov 9, 2006
I have been using a Compaq Deskpro with Windows XP SP2. And then I sold that computer and bought a Compaq Evo. I then inserted the same harddrive but it is failing to boot. When I insert the installation disc it says "Press any key to boot from CD". Pressing keys does not activate anything and it stays on the same screen. I then created 6 set up disks and they all work perfectly loading drivers etc. The problem starts when I reach the stage where it says "insert Win XP SP2 installation disc and press any key when ready". Pressing the keyboard keys produces no response
View 7 Replies
View Related
May 11, 2007
About a month ago I decided to get a much bigger hard drive (500GB) but theres no way I have time to reinstall everything so I decided to clone my existing hard drive, I tried acronis and the clone went superfast and put everything onto a single partition the full size of the new disk - when I tried to boot up with the disk, it didnt boot. It got to the pale blue screen that usually says 'welcome' but instead it had a small windows XP logo and that was it, it didnt go any further. I contacted support and they were no help so last night I tried another free software hdclone - it took about 6 hours but I actually managed to boot up from the new disk - but the new drive had a single partition the exact same size as the old one and the rest was unused space - no problem
View 10 Replies
View Related
Oct 10, 2008
I just installed a 320gb I had around in a spare PC. I was reading up on jumping everything and understood that I should set the main HD as master and the spare HD as slave on the primary IDE connector, then set my DVD drive as CS on the secondary.My problem is that the master and slave connectors on the ribbon cable aren't long enough to reach both drives.(only places the drives will fit) So I hooked everything up CS while I put the main HD on the primary IDE and then hooked the DVD and spare drive on the secondary IDE. Everything seems to work fine and I can see both drives and everything, but on bootup I have to go into the boot menu and pick the main HD to boot. Is it safe to run everything this way? And if so how do I fix the booting issue?
View 6 Replies
View Related
Dec 9, 2005
I had a Win 98 SE PC on a 20 GB drive (FAT32), and then I decided to ad an 80 GB and install Win XP. Since I wanted to maintain some Win 98 function compatibility, I opted for dual-boot, formatting my 80GB HD to NTFS and installing all of the Win XP OS into that drive. The Win 98 runs fine and is limited to the 20GB FAT32 HD, while the Win XP can see both drives but its files and programs are contained in the 80GB NTFS HD.
Now that I have deemed the Win 98 OS no longer necessary for this machine - I am trying to figure out how to make my machine boot from the XP HD (I plan to format the 20GB disk and use it for back-up storage
View 6 Replies
View Related
Mar 28, 2006
I have recently re-installed Windows xp and all is fine with that operating system, but the problem that I do have is.I have two hard drives but only one is showing up. I know it is still there somewhere, but how do I make it available to use?
View 14 Replies
View Related
May 31, 2006
I am having a small problem. I have an old server, a Compaq Proliant 1600. I have had it for about 2 years, and today I finally decided to work on it. I added some more RAM, and installed Windows XP. It has six 9.1 GB Hard Drives, but it only recognizes the one hard drive that the OS is on. That is the only drive that will show up when ever I go to My Computer. My question, how do I get the other 5 hard drives to show up?
View 1 Replies
View Related
Dec 30, 2008
I was wondering if there is any way to boot my new Windows XP computer off of an old Windows 98 Hard Drive without screwing anything up. What I am trying to do is access and run a program that was installed on the WIN 98 Hard Drive. The software was an expensive Patent Software and I no longer have the installation disk.Here is what I have already tried:1. Connected the WIN98 hard drive to my XP Computer and booted up. Computer started to boot into WIN98 but came back with some kind of memory error and shut down.2. Tried running the software from the WIN98 Drive in WINXP but came back with an error about missing DLL files.Someone mentioned running the drive as a virtual machine.
View 1 Replies
View Related
