USB Com Ports - MICR Reader - MS Doesn't Recognize
Aug 29, 2005
I have a USB MICR Reader (It is used for reading checks and credit cards) and i use the accessibilitiy option in control panel to enable serial key devices since the program has to go thru a virtual keyboard in order for the MICR Reader to communicate with the program and in the accessibility options you can only use com 1-4 since MS doesn't reconize anything above 4 for use as a serial device. Nedless to say i need to know how to change com ports in XP the device will take up to com port 18 but the serial devices above 4
View 1 Replies
ADVERTISEMENT
Oct 14, 2005
I recently ought an E-machines computer running XP MCE w/SP2. It has an AMD 3400 processor and 200GB HD and 1MB RAM. I had transitioned all of my files and applications from a Windows 98 machine using Aloha Bob's PC Relocater. Everything seemed to work fine, however, my USB ports will not recognize anything except my printer (no external flash drives or my digital camera - software is loaded onto the computer). I had contacted E-machines tech services and they asked me the usual stuff, like disabling the ports and restarting the machine, check the BIOS to ensure they are enabled, etc. Now they are suggesting I run a ''Non-Destructive'' System Retore. Naturally I will back up my files and apps on DVD, but my concern is will I be able to reload the apps to which I do not have disks for? Is there something elese I should do prior to running the System Restore (in SAFE mode??). Also do you think this will work and restore my USB ports?
View 8 Replies
View Related
Dec 30, 2008
Trying to help a friend whose XP system is running very slowly, it does not recognize any usb ports and will not connect to the internet. She is anxious to retain her photos. As she can't put any software on the system to check for viruses etc, the only thing I can suggest she does is to re-install XP. If she does not reformat the disk will her user data still be accessible?
View 7 Replies
View Related
Aug 23, 2008
I was having a lot of troubles with XP PRO after a CPU failure, when I tried to do an XP installation Repair. It failed miserably and after a month of posting and searching for answers, I threw in the towel. I reformatted the HD and did a clean install. On the advice of a MS Tech, I downloaded SP3 and installed it first thing. After I got everything up and running with all the updates, I discovered that XP no longer recognizes my USB ports as USB2. I found some original drivers on the Motherboard installation disk, but it will not allow me to install them because my XP SP2 install disk is already supposed to have them. I tried removing all the USB drivers and forcing XP to figure it out, but no luck. It is an ASUS P5GD2 Deluxe with a P4 processer and an XP PRO SP3 Operating System.
View 3 Replies
View Related
Jun 17, 2008
All of a sudden my Dell laptop (just over a year old, go figure) has started acting funny. Here's some of the issues that started happening all of a sudden -It runs super slow at times and freezing up, svchost.exe seems to be taking a lot of resources up when that's happening -The memory card reader doesn't work. It makes the noise that a new device has been recognized when I put one it, but it never shows up in My Computer. The memory card reader does appear to be working properly in device manager. -Both firefox and IE aren't loading some sites. I'm connected to the internet and some sites load just fine and others never seem to load- and it's not that the site is down. The list of sites I can't access I'm starting to discover is big, and which sites can be access and which ones can't doesn't seem to follow any pattern- I can access google & gmail, but it won't perform a search (either from the page or from the search toolbar in both IE and firefox). I can access and log into my banking sites, ebay, and other random sites (some secure, some not). But I can't access weather.com, the Neosmart forums, the Dell community forums, dell.com, and others. I can access facebook.com, but I can't log on.
My first thought was I have some type of spyware even though I'm very good about not downloading stuff so I ran a ad-aware scan and it came up with nothing. I also ran a hijackthis scan and everything was normal there too. I'd been noticing recently that some windows processes in task manager are using what seemed like a large amount of memory. I then looked my other computer and on the problem one Explorer.exe is running around 99,000 - 120,000 kb- on my other computer it only runs around 14,000-35,000, that big of a difference between the two machines (both running xp- the problem one pro on a laptop, the other home on a desktop) is not normal...........
View 13 Replies
View Related
Feb 26, 2008
- Taskbar has reverted back to the 98 style
- When I go to Start >> Search nothing happens
- Doesn't recognize the printer that's been installed for over a year
- Won't let me install another one
- System restore gives the error "System restore is not able to protect your computer. Please restart your computer, and then run System Restore again." and restarting does nothing.
View 8 Replies
View Related
Nov 5, 2007
I have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
View 12 Replies
View Related
Mar 1, 2005
My operating system, Windows XP, comes up with several error messages when I try to open up system files or programs that concern the "Computer Administrator". I then checked in the Control Panel to make sure that my name is in fact the admininstrator, and it is, to no suprise. But whenever I try to open these programs it either says this has been disabled by the administrator. The administrator has turned off this feature.
I don't know why this happens. I find out a way to fix it and then when I close it, it won't let me reopen it without fixing it again. Some programs that I have tried that don't work and give me this or a similar error message are, System Restore, Task Manager, Regedit, and Windows Update.
View 1 Replies
View Related
Nov 24, 2007
I don't really understand it.I initially used G-parted to partition my 250gb drive into a 100, 75, and 55.Then I tried installing Windows XP SP3 and it says it doesn't recognize them, so I deleted those partitions and made new ones (the same size though) and it asked me to reboot. After I rebooted it prompted me again with Press Enter to install Windows, so I do and it says some crap about how it doesn't recognize any hard drive plugged in.BIOS recognizes the drive and its size.
View 14 Replies
View Related
Dec 5, 2006
I just replaced my old DVD ROM with a new DVD-RW drive. The system writes to the new drive fine (I have burned a couple of Video DVDs) but when I boot the system the Bios says it doesn't see the D: (CD) or E: (DVD) drive. Once I am into Windows XP I can also play CDs from the CR-RW drive but I can't use it to copy new software onto the system.
View 4 Replies
View Related
Aug 3, 2007
I have a multi-boot system set up and it Includes 3 OS's, Windows 7, XP, and a flavor of Linux. My XP installation does not recognize hardly any of the drivers for the hardware on my HP pavilion dv2941se laptop. Beings it doesn't have the driver for my network card i cant get online to search for other drivers.
View 2 Replies
View Related
Mar 3, 2006
I have a Windows XP home SP2 computer that has a Sony DVD RW DW-D22A that supposedly supports both -R and +R. Well I bought a stack of 100 Blank DVD-R and less than 1/2 way through the stack they turned into lousy DVD's. Both for DVD movies and data storage they wouldn't work. I would get this CRC check sum error message. I contacted the manufacturer and sent in a few samples and they replaced them - sent me two stacks of 50 - nice company. Well I just burned a data disc and my computer doesn't recognize anything being on the disc - I even get the "You have inserted a blank cd/dvd window" thing on my screen. I then tried to burn a dvd movie using a different program and that program doesn't even recognize a disc being in the drive (yes I did put in a fresh dvd before I started the program).
View 6 Replies
View Related
Aug 9, 2007
My brother went to My Computer one day and saw that there was no disc drive there, it was working in the past, but now it doesn't show up, I don't think he did anything unusual. But it shows up under Safely Remove Hardware Wizard with "Samsung CD Drive" or something like that.
View 14 Replies
View Related
Sep 8, 2005
Just upgraded a old pc running win 98 to xp.Before I reformatted and installed the new os I made a backup of my 98 os and files using ms backup on a DVD. The file was about 3 gb and was verified by the backup program. It has the file extension .qic.The XP ms backup doesn't recognize the .qic format.Anyone know if I can install the 98 backup on XP or a freeware backup program to read my file?
View 8 Replies
View Related
Sep 29, 2007
I'm struggling to connect my Sony Handycam DCR-SR42 to my Compaq Laptop, Windows XP.It works on other computers without a problem that's why I think it must be some setting in XP. I plug it in when prompted by installation software and the camera goes to :'preparing' Then immediately the windows found new hardware creen pops up. On the other computers that screen didn't come up and the camera would go straight into connecting' mode.I tried switching the 'found new hardware' off by disabling the plug and play in'services' with no luck.When I connect the camera while I'm starting up the laptop, it goes straight into 'connecting' mode but unfortunately that stops as soon as windows is started.I would like windows to detect my camera as a drive and not 'other devices
View 1 Replies
View Related
May 26, 2006
I'm running XP SP2 home addition 32 running on AMD64 processor with 1G ram. Most times XP doesn't recognize my Canon i350 printer even though the PC beeps to acknowledge that the printer is on-line through a USB connector. I've reinstalled drivers more than once and even used Plug&Play. Also I don't have any other printer drivers installed. Canon i350 is set as my default printer. Each time the problem occures I can get XP to recognize the printer by either turning the printer off and on again (to easy) and if that fails re-booting sometimes more than once.
View 5 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
Feb 18, 2008
I had my wedding pics placed on a CD by the photographer. When I place the CD in a pc running Vista, it pulls up all the pics just fine. When I place it in my home pc though, running XP, my pc acts like there isnt even a CD in the drive, like it doesnt recognize the CD is there at all
View 6 Replies
View Related
Jan 12, 2006
my XP SP2 doesn't recognize my Olympus FE-100. It installs it as "Unknown device". I have no problems this kind with my printer, mp3 player, but i had the same problem when trying to connect my friends watch which has usb memory in it (it works fine on his computer- XP). I tried to connect my camera on Win ME and it works properly. I know this has to do something with my XP, i just don't know what. I tried to uninstall- reinstall the camera, stop-restart the WIA but nothing helped. There is no driver for it because xp should recognize it at least as a storage device.
View 6 Replies
View Related
Jan 20, 2009
Previously, my laptop did recognize the drive but for some reason it is now not finding it. I have plugged the drive into another computer and it is recognized. The laptop will recognize other devices which I plug into it. I have checked for viruses and have also tried restoring to an earlier time but no luck recognizing it
View 2 Replies
View Related
Nov 18, 2009
Tried opening a video file that was changed from MSWMM in Movie Make towmv.Previous files opened when I changed them to WMV. This iswhat I get when I try to open file: "Unrecognized format for 'D:Documents and Settings(name of file).wmv'".
View 4 Replies
View Related
May 9, 2005
I recently was forced to do a re-install of XP to clean up a few bugs.The system has 3 hard drives, but since the reinstall, only the C: drive appears. The other two are nowhere to be found.I've tried mapping to them, but they just don't show up there as a mapping option.Anyone have any advice? When I added the extra hard drives I didn't have an available slot and did have to create a partition. I no longer have the software I had originally used though. Do I need it to make the 2 other drives visable?
View 1 Replies
View Related
Jan 6, 2008
I keep getting this error "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it". And if I leave my PC on to long the keyboard, mouse, and sometimes even the monitor stop working. I've tried unplugging the keyboard and mouse (which are not USB) and plugging them back in, but to no avail.
View 8 Replies
View Related
Dec 7, 2008
Every music folder in My Music after C (cameo!) has disapeared although I know they are still there - i can still play them in itunes and even open the song folder but if I copy it and drop it back into My Music it vanishes. Windows doesn't even recognise the memory that the missing files use and thinks the folder holds 3 gigs when its more like 30. Just wondering if there is anything I can try before going through the hassle of reformating.
View 9 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Nov 29, 2009
Since XP Pro original doesn't recognize SATA HDs, is it workable to create a install CD using Original XP Pro CD and add in SP1a and slip-stream them together on a new machine having SATA HD?Will this allow XP to recognize the HD and use it well?Similarly, same idea regarding XP HD size limit of 127 Gigs pre SP1a?
Current HDs are so large.How to create such disk ((Tutorial link)?
View 7 Replies
View Related
Dec 5, 2006
I have an old T1090 eMachine that doesn't recognize the new larger hard drives. I purchased a 200 GB PATA (IDE) drive and it shows up as a 75 GB drive using GParted and under Windows Disk Management. I expected that it would only be recognized as 137 GB, but I can't explain why it only sees 75 GB. I suspect that the BIOS needs to be updated, but I've never done this before so I was looking for a procedure and ideas for trying to find the latest BIOS online.
View 8 Replies
View Related
Sep 12, 2005
I'm trying to copy some files from my PC, but it doesn't recognize that I've got a dvd burner, it sees it only as a cd burner, it will play dvds, but wont let me erase or burn.My pc has started getting some bugs recently, and I need to hurry to backup my files, before it takes the big crash.
View 6 Replies
View Related
Jul 19, 2005
Last week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
View 1 Replies
View Related
Feb 10, 2007
with new dvd reader i went to the bios to configure it but i see it has exclamation marks after its name.why isnt the dvd reader working
View 1 Replies
View Related
May 21, 2005
I just bought the MS Keyboard with Fingerprint Reader. It works fine logging into Windows XP. But, it's supposed to work for visiting Web sites that require login. And, it doesn't. I can't even get it set up
for any website I've gone to yet.
View 6 Replies
View Related
