Wont Recognize External Hard Drive (E) After Removal And Power Back On
Jul 20, 2005
I added a 120 gig Western Digital USB external drive and used Acronis to create a backup of my hard drive. I then used Windows XP to remove it as a USB device so I could power it off. Now, when I power it back on it is not recognized by XP and does not appear on My Computer or on Disk Management (where I originally formatted it for NTFS). All I get is a sound like a single "KERPLONK" when I power it on.
View 3 Replies
ADVERTISEMENT
Jul 26, 2005
I have a new samsun 120 GB hard drive that I have placed into two seperate external enclosures connected to my dell pentium 4 win XP computer via USB. My computer will not recognize the hard drive. It
powers up fine? Any ideas of what to do next?
View 5 Replies
View Related
Mar 18, 2006
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
View 6 Replies
View Related
Nov 1, 2007
my external hard drive all of a sudden stopped showing up in "my computer"
and a can't find it anywhere else. it make the hardware sound when I plug it in but nothing shows up. when I plug it in another port it comes up with a message saying "USb device not recognized. one of the usb device attached to this computer has malfunction and windows cannot recognize it
View 7 Replies
View Related
Aug 2, 2008
Well I have an hard drive into a external enclousure but the windows XP of a new CPU do not finish detect it when I connect it. But the same external hard drive work fine in my laptop. I formated my CPU 2 times, but i got the same error of Windows. My CPU has a new motherboard Foxconn M7VMX-K.
The USB ports work fine with my pendrive.
In my computer i can see a new hard drive with a letter (K, whithout data.
The Windows XP Administrator Disk doesn't show nothing about the external hard drive.
View 6 Replies
View Related
Dec 23, 2005
I want to back up my entire system to an external harddrive and then reinstall windows on the internal one.My question is can I use a program to put programs back on to the internal drive from the external harddrive. I heard ghost copies everything even registry is this true?
View 10 Replies
View Related
Mar 11, 2006
I want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
View 4 Replies
View Related
Sep 29, 2007
I'm struggling to connect my Sony Handycam DCR-SR42 to my Compaq Laptop, Windows XP.It works on other computers without a problem that's why I think it must be some setting in XP. I plug it in when prompted by installation software and the camera goes to :'preparing' Then immediately the windows found new hardware creen pops up. On the other computers that screen didn't come up and the camera would go straight into connecting' mode.I tried switching the 'found new hardware' off by disabling the plug and play in'services' with no luck.When I connect the camera while I'm starting up the laptop, it goes straight into 'connecting' mode but unfortunately that stops as soon as windows is started.I would like windows to detect my camera as a drive and not 'other devices
View 1 Replies
View Related
Jan 20, 2009
Previously, my laptop did recognize the drive but for some reason it is now not finding it. I have plugged the drive into another computer and it is recognized. The laptop will recognize other devices which I plug into it. I have checked for viruses and have also tried restoring to an earlier time but no luck recognizing it
View 2 Replies
View Related
Jul 10, 2005
I have an external USB 300GB Seagate drive that used to work fine.Then, periodically XP would not recognize when I turned it on. A re-boot would fix the problem. Now, XP won’t recongnize the drive at all. I get an "unknown device" error. I have a USB 2.0 card I plug the drive into, and all other devices in that card work fine. The device driver manager says all is well, except of course with the "unknown device" it notes, which is the external drive.
View 8 Replies
View Related
Jan 7, 2007
quality of AcomData External HD? Also, is this a well established company? Any info as to how this brand compares to a Seagate External HD?
View 5 Replies
View Related
Mar 5, 2010
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies
View Related
Sep 29, 2007
I have Dell XPS w 2 hard drives. the master is 80gb(NTFS).."C" drive, and the slave is 120gb(FAT32)...."F" drivethe other day, after a re-start, Windows gave me the not so friendly message "Checking file system on F...the volume is dirty...windows is verifying files and folders.......0 percent complete"now, the problem is that it took 30 HOURS! before it completed its checkup! well, so before i panicked too much, i decided to buy an external drive to back up some stuff from the slave drive. after backing up about 20 gb worth of stuff, i re-started, and it did the same thing! tho this time it took "only" 18 HOURS to do its checking! it did say that "windows replaced bad clusters in files"
View 2 Replies
View Related
Jan 8, 2009
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies
View Related
Jun 25, 2005
I have a primary drive (maxtor) whice xp is running on and a second hard drive (maxtor also) which i have been using for some time for storing files. i had windows xp home and everything worked fine for a long while. recently since i upgraded to xp pro, the hard drive icon for the secondary drive disappears from my computer. i even tried saving stuff to the drive from ms word or something and it is not recognized. usually a restart will solve the problem, but after i let the computer run, (till like the next day) it will happen again. i dont know yet what event causes it to dissapear. i sometimes use standby, but i dont think that is consistent with the problem
View 4 Replies
View Related
Jan 25, 2007
I have an HP Media PC M400Y. It is a P4 3.0 Ghz with 1GB ram. It originally came with MCE2002. Last week I upgraded to MCE2005 to use the media extender feature with my new X-box 360.
Here is the problem and some background.
About a year ago, I had installed a second SATA hard drive, Seagate Baracuda 300GB, model ST3300831AS. This drive was plug and play into the motherboard and never had any issues. Before reformating the main C: drive, I moved all my valuable data on the SATA drive.
I then turned the PC off, removed the power and signal cables from the SATA drive. (I'm a novice, and didn't want to take any chances of erasing the SATA drive, while reformating the main C drive)
View 8 Replies
View Related
Aug 6, 2005
I was told I could take a hard drive from a windows 98 computer and the person is buying a new Windows xp so I can hook up the win 98 hard drive as a slave to the new computer with win xp so I can drop and drag or cut and past files that they want off the 98 hard drive put on their new computer. Now If their new computer with the win xp on it, if there is an ide cable going to the hard drive and nothing else then I can hook up the win 98 hard drive to the same ide cable as a slave and no problem.
However if the windows xp computer has the hard drive on the ide cable and also the cd-rom then is it ok just to hook up another ide cable to their mother board and hook the hard drive from the windows 98 computer on the end of that ide cable as the master? and by turning the computer off, and then hooking up the hard drive and then turning the computer back on it should reconize the windows 98 hard drive in my computer right away right?
If I would have to put the windows 98 hard drive in the new computer on a seperate ide cable is it ok to have it as master? cause the hard drive that is already in it would be master to but it would be on a different ide cable. I am hoping the new computer just has the hard drive on an ide cable by itself so I can just hook the other one up as a slave and get the files and be done with it. How ever if someone could give me a couple or three scenario's with ide cables and hooking this up I would be very much appreciatetive.
View 3 Replies
View Related
Jun 22, 2008
I am trying to install XP Pro. After I boot from the CD everything looks good until it's time to select which HD to install in. It won't recognize it, I've found out there are multiple problems with these new large HDs. People talk about the 137 gigs limit, upgrading the drivers via Floppy, even customizing an installation CD image with an 'OEM' folder below i386. I've tried many things but still can't have it recognized. This box doesn't come with a floppy and I don't have one. Why the freaking dependability on a floppy drive.
View 4 Replies
View Related
Nov 21, 2007
I would like to have a go at this slipstreaming thing, since I cannot install Windows XP Pro (it's a retail version from my desktop pc, which I'm now getting rid of) on my Toshiba laptop - it won't recognize the hard drive. I know how to do it, but I don't know which files (SATA drivers) to include in it. The harddrive is new (didn't come with the laptop) and it's a Samsung HM120JI, but it seems to be compatible, since the recovery disk worked fine and I am now running Windows XP home edition.
View 14 Replies
View Related
Oct 7, 2010
We have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies
View Related
Dec 22, 2006
I have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
View 5 Replies
View Related
Jun 7, 2008
Well i tried to install windows on a used 80gig hd. It ended up hanging at the Setup is inspecting your computers hardware configuration. So i searched around a bit and it said my hd needed to be repartitioned so i said instead of that id go out and buy a new 500gig that was only 80 dollars. So i put the hd in and tried with this and it still hangs at teh same screen. For some reason i cannot get passed the "Setup is inspecting your computers hardwear configuration" screen. I then put in another CD of windows but the 64 bit version to try that one to see if it were the CD that were bad. And it went straight into the setup but then did not recognize my harddrive was there.
View 3 Replies
View Related
Oct 28, 2008
I've got a very annoying problem with XP that I just can't figure out. I have spent hours and hours trying to fix this and posted on several forums to no avail, so any help would be much appreciated.My laptop died last week when I spilt water all over it. The harddrive was not effected and stayed completely dry.I am basically trying to save the data on the harddrive and completely wipe/format it.
I bought a 2.5" SATA > USB enclosure/caddy and put my laptop HDD into the enclosure. When I plugged the enclosure into my spare PC using the power/USB Y cable, the enclosure powers up and the LED light comes on. I can also feel/hear the laptop HDD inside spinning. A message comes up on the PC saying "New hardware found; USB mass storage device".
View 4 Replies
View Related
Aug 19, 2009
I am running XP Pro on my computer. On another drive I have windows 7. My computer stopped booting to my XP drive all of a sudden, but it would let me boot to my Windows 7 drive. That lasted for about 3 days. Now I can't boot to either drive. When I start the computer it says there is no HDD. I tried to use the XP disk to repair, that didn't work., so I thought I'd do an XP install. But my hard drive doesn't show up all the time. Or it will show the HDD but upon trying to pick a partition to set up XP in, it then tell me there is no HDD. I get the blue screen of death, and have to manually force a shut down. Other times it tell me that the HDD is RAW, and it needs to be formatted. How can I get the HDD to format? Is there a way to do it through DOS. Sometimes I can't even get to the DOS prompt. The bootup section is corrupt. I need to repair it, but can't if the system doesn't see my HDD.
View 8 Replies
View Related
May 17, 2007
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
View 8 Replies
View Related
Feb 23, 2009
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.
View 2 Replies
View Related
Aug 3, 2007
I have a usb external hard drive. Can I install windows os on this drive and use it.I am told that windows must be installed only on main hard drive 9i.e. drive 0).
View 10 Replies
View Related
Sep 25, 2005
Recently, my motherboard fired, but the Hard drive was uneffected. Since i had a lot of info on the hard drive i tryed to find people who could take the info off the hard drive for me. I then had this great idea of just putting my hard drive into a "Hard Drive Enclosure Kit". Well, i did that and it worked great. But theres one problem, I can't seem to get into the Owner folder of the hard drive, for evey time i do, it brings up.
View 8 Replies
View Related
May 10, 2007
I just recently purchased a 100 Gb laptop hard drive together with an outer case and a USB cable. I just wanted to upgrade my laptop's hard disk, by first making an image of my current drive into my new one through the outer casing. The thing is when I connect it to my laptop, windows cannot detect it. Whats wrong with it? Is there anything I have to do?
View 9 Replies
View Related
Feb 12, 2006
I've been using an USB enclosure successfully for some time with no problem. I upgraded to a Maxtor 100 gig in the same enclosure. When turned on it does the "plug and play" chimes and it shows up in the device manager as installed and working properly. But it is not shown in My Computer as a drive letter.
Dell dual core, 1 gig RAM, Windows XP service pack 2
View 4 Replies
View Related
Nov 29, 2006
At first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
View 3 Replies
View Related
