DVD-RW Drive - CD Is Recognized, But Not Dvd
Sep 21, 2007
I have been using this pc with windows xp for about a month now and up to now I have had no problems, but for some reason my drive has suddenly stopped reading dvds...My drive is an Optiarc DVD-RW AD-5170AI can insert a cd and it recognizes and reads the disk perfectly, but when I insert a dvd windows appears to start to read the disk, but after a few seconds nothing seems to be happening except that the read light on the drive is lit and the drive makes a few strange sounds. I have left it to load for a few minutes but still nothing happens.After searching, I have found 2 possible solutions:The first was to uninstall the driver and restart. Upon restart windows will reinstall the device.I tried that twice, still experiencing the same problem.
View 5 Replies
ADVERTISEMENT
Mar 16, 2005
I installed an a 2.5 Toshiba notebook drive in a external enclosure and I can't get XP to recognize it. The drive spins up and the light comes on to indicate it is running but nothing is shown in device manager or My computer. It also is not shown in disk management.I have uninstalled the the USB drivers through the device manager with no change after rebooting. The USB ports work fine with my other external drive.The drive was working fine in a notebook that had a
cracked screen. It is formated in NTFS. What else should I be looking at to solve this problem?
View 4 Replies
View Related
Sep 1, 2005
I have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies
View Related
May 16, 2005
I have a Maxtor DiamondMax 10 250 GB hard drive. I had ghosted a dying WD 150 GB drive on it and had been using it about a week. After a restart it said that ntdlr was missing. Solved that problem. Then a little while later, the disk could not be recognized. Took it to a data recovery place and they said all the data was still on
there. For $100 bucks, they reconstructed the logic on the drive - whatever that means - but to recover the data entirely was going to be $1500+. So I took it home to give the recovery a shot myself. I hooked it up as a cable select in the slave position on an existing Win XP Pro cable select ready system. The computer works fine but I can't see the 250 hard drive anywhere. Not in any software I have downloaded, not off any boot disks, not in any command prompts, not even in the bIOS. The cable is fine, the power is fine, and the drive spins up.
View 2 Replies
View Related
Dec 13, 2006
A Toshiba Satellite 2805-S503 that originally came with Windows ME. My friend at work upgraded my OS to Windows XP but now my CD-ROM drive doesn't recognize CDs. It recognizes DVDs and some games, but it won't read any CDs.
View 6 Replies
View Related
Jun 8, 2006
I did forget to mention that I had tried this external on 2 different pcs-- the other with xp home with sp2.
View 5 Replies
View Related
Feb 1, 2009
I have a Compaq Presario with a Celeron CPU 2.53 GHz and 504 MB of Ram. I use Windows XP Home Edition Version 2002 Service Pack 3. I know its a old machine but does what I need it to do. My computer has done this for a long time but I'm getting sick of having to restart the system to access CD drive. When system initially boots up the CD drive will open and close just fine but sometime later (not sure exactly how much later, (hours of 1-2 days) the door won't open by pushing button or sticking pin in small hole. If I go to My computer it doesn't even show the CD drive. What could be causing this?
View 7 Replies
View Related
Jun 22, 2005
I'm now praying that this will get fixed--my computer isn't recognizing any cd's I put in my d drive. It won't show up anywhere and when I go to my device manager there's a red x on top of the cd icon. I don't have any viruses or anything-I've run everything- and I've tried unplugging some of the wires and replugging them. I don't even know what that;s suposed to do or which wire is which. If anyone can help I would be soooooo grateful. my dad'll blame this on me if it doesnt get fixed asap. I have windows xp. and when I type in D:/ into run, I get the message:
D:/ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it stil cannot be located, the information might have been moved to a different location.
View 9 Replies
View Related
Feb 20, 2007
I've got a IBM ThinkCenter that just won't boot. It powers on just fine, and I even tried installing a brand new power supply, so power isn't the problem. When I turn it on, I almost immediately get the IBM and Intel logos on screen but that's all. The machine does not seem to try to read from the hard drive, CD ROM or A drive. It never allows me to enter the BIOS or try to start Windows. I'm not even sure if the keyboard and mouse are being recognized. Is this a hardware problem? if so what? or can I still get this thing to boot somehow?
View 11 Replies
View Related
Jun 19, 2005
I was aware that Windows used to have limitations on the size of Hard Disk Drives for file sizes etc. but I had thought that these had now been fixed with XP & XP PRO. I installed a new 250GB into a friends machine about a month ago & this went without incident. Yesterday I just put into an external caddie a USB2 drive of 300GB into my machine. XP Pro recognizes the drive & it will work but my computer displays the size as only 127GB which is less than half 's true size.
View 4 Replies
View Related
Dec 26, 2005
After backing up on this drive for nine months (and with a reformating three months ago), now the backup will not recognize the E: drive. No error message is given. MY Computer shows that it is now 3/4 full with plenty of space (46 gig) on the Acomodate 160 gig drive under NTSF format. I am thinking of changing to a fire wire from the USB.I have been doing a complete system backup and maybe I'll change to just backing up my documents after we get it working.
View 10 Replies
View Related
Jul 4, 2005
I recently recieved a Maxtor 40 GB Hard drive. i have installed everything Correctly ie. Power, Cable, ect. I have tried every single configuration of Jumper settings. It was reconized in bios, but it wouldn't come up as an icon in Xp. I have Xp Home W/SP2
View 5 Replies
View Related
Sep 6, 2005
I have two hard drives that were working perfectly on XP. I thentook out the second hard drive because I wanted to try and fix anotherhard drive. When I was finished I then put the original second harddrive back and now it is not recognized anywhere. Why? I may have moved the jumpers but I am pretty sure I did not. Even so I checked the picture on the hard drive and put them in the proper place. Why is the same drive now not recognized when it was just a day ago? I need to getsome files from it
View 2 Replies
View Related
Jan 30, 2007
both my externals are perfectly fine....they work on my other computer. Originally when i plugged them into my laptop the Found New Hardware wizard would startup, but be unable to do anything.
View 5 Replies
View Related
Apr 2, 2007
I was messing with partitioning my hard drive. Nothing challenging, but it seemed to work. But then partition magic said the entire drive was "BAD" and had no partitions, knowing full well it had four.
My computer still worked. Then it would get to where it was restarting on its own for no reason. Then sometimes the bios recognized the master and the slave drive and loaded, but most of the time it didn't recognize either, and wouldn't load. Sometimes it just recognized one drive.
I had thought maybe the MBR was messed up. But then why wouldn't the bios recognize the drives every time. And if one drive was messed up, that wouldn't effect the bios would it
View 1 Replies
View Related
Sep 12, 2005
First off, I give much respect and appreciation to those who run and contribute to this website. I have followed for a while and see great things happening here everyday. Kudos to you all. My issue is that I got a pretty nasty virus that I feared had wiped my hard drive. It corrupted my boot sector somehow and I couldn't even boot in safe mode w/o the blue screen of death giving me a stop error. I used an install disc and fixed it with the software fix. so now I am back up and running all systems go.
View 14 Replies
View Related
Jun 29, 2007
I run WIN XP Pro on a Dell desktop that has two hard drive. I recently installed a CD drive and upon rebooting, the secondary drive (D), although recognized by the startup (BIOS), is no longer present when Windows finally opens. It's not present in the device manager and all shortcuts to it are null. All the bables are correctly installed and I've tried rebooting, re-installing the drive to no avail.
View 12 Replies
View Related
May 11, 2007
My USB External Hard Drive suddenly decided to stop working monday before last, it is weird, like it will turn on and all, but it doesnt get recognized and while its on none of my programs will load like Ventrilo and games(ventrillo will half load but not all the way) and the computer wont shutdown while its on. but the moment i turn it off they all start running smoothly agian and the computer will shutdown immediatly (if i am at the shutdown screen). Any idea why/how this happened and how to fix it?
View 1 Replies
View Related
Feb 27, 2008
Win XP Professional in new Dell Vostro does not recognize Bytecc 320 external hsng with 250 gb Seagate drive. Under hardware manager it shows up and says this device working properly. XP does not assign a drive letter. Disk management shows device but reports it as 128 Gb capacity. I do not want to settle for half the drive's capacity so i did not create a partition.
View 8 Replies
View Related
Apr 18, 2010
I have a sata 500 GB hard drive from Seagate that just won't get recognized. I've been in Disk Management, I've scanned the disk, I've rebooted, and Disk 1 is there, but the message is it's offline--and after I did the reboot I got the message that the hard drive USB had been recognized--but it ain't there.
View 8 Replies
View Related
Sep 12, 2009
Oem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
View 1 Replies
View Related
Aug 24, 2005
I have Windows XP Home installed and my dvd/cd burner is a Device Description SONY DVD RW DRU-530A. I have burned many files,photos,and music on this unit using cd-r discs. I am now using DVD-r discs and the burner will not recognize the disc. I tried DVD+r discs and have the same problem. Attached is the statement I get when I try to burn a disc. Should I go back to a CD-R disc or what could the problem be? I have tried to burn using Windows and using Nero with the same result.
View 4 Replies
View Related
Mar 20, 2006
When I first got the computer, when I plugged in a digital camera, I got a "found new hardware" pop-up, thereafter when plugging in the USB cable, the XP camera wizard popped up and the pictures were downloaded without a fuss. At some point it stopped working, and I've ended up using Picassa to get the images d'ld, but it won't let me add photos to an existing folder. I want the Windows wizard to work again, that was better.My new camera is not recognized at all, and if anything pops up, it's Explorer. I tried to install drivers from the disc that came with the camera, but keep getting a message that says I don't need to. I've tried to manually add the camera with the "add hardware" function, but it won't work.
View 13 Replies
View Related
Feb 10, 2007
Cd/dvd appears to be working but when a cd is installed a message is received to install a cd so it is not possible to install any software from a cd as it does not appear to recognize that a cd is already installed
View 8 Replies
View Related
Mar 27, 2010
When I try to go to the ipconfig command line in xp, I get this message: is not recognized as an internal or external command, operable program or batch file. I was trying to clean my DNS cache.
View 6 Replies
View Related
Dec 16, 2006
What would cause a relatively new HP Media Center computer to recognize other things inserted into any of the USB ports in the front (for example, a jump drive), but NOT recognize one device (a Lowrance iWAY 500c GPS car navigation device) that is readily recognized when it's plugged into a different computer?The HP computer is a friend's. The "different computer" is mine, a custom machine from Puget Systems with a P4 on an Asus MoBo. On the friend's computer, we get a "bubble" message from the taskbar to the effect that the device is not recognized -- so it knows something is plugged in, but apparently doesn't have the driver for it.
Her system is running Win XP and I assume (but don't know for sure) that she's kept up with Windows updates.
When I check MyComputer, the Lowrance isn't on the list. In Device Manager, it's listed as "Unknown device".I'm wondering about things like the HP lists a pot full of drives because it has all the camera card slots, etc. in the front panel (I think the drives go all the way up to J:, almost all of which are "removable drives".
View 13 Replies
View Related
Dec 14, 2005
I recently changed processors - nothing too technical -except now 5 times out of 6 , my PC will not recognize my DVD drive.There was no problem before.
View 7 Replies
View Related
May 22, 2006
on another thread, i'm looking for an answer to a problem with my daughter's computer and her dsl connection i was asked to run ipconfig/all on both my computer, that works well with dsl modem, and her's, which doesn't. the command prompt brings this error message "'IPCONFIG' is not recognized as an internal or external command, operable program or batch file."
View 10 Replies
View Related
Mar 21, 2010
i have belking N+ adapter comes with a stand which plugs in to my usb drives. Recently i have been getting Device is not recognized ive read through many forums on the "Fix" i unplugged my computer i un-installed my drives and the problem still continues only if i have the original belking stand. when i remove the stand and connect the adapter straight to my computer everything is fine. I did some tests with other usb extension cables i get the same problem but after removing and plugin in the cable a few times it works. Ive had moments when i have the belking stand connected i will get a connection signal but a few seconds later it will send a message USB device not recognized.
View 7 Replies
View Related
Sep 6, 2008
I have an HP Compaq 6515b and after I deleted Nero (could have been before that) I noticed that it only recognizes my drive as a CD Drive and no longer my DVD drive. It won't let me burn DVDs so do I need to search out DVD software? I have gone to HP and the only thing that they say about a DVD (drivers wise) is for a WinDVD program. What do I need to install to get my DVD burner back?
View 13 Replies
View Related
Jul 8, 2005
Whenever I try to use a usb device in xp pro it always shows up as unknown device or the usb device not recognized pop up comes up. It happens with everything, memory stick reader to a gaming controller. My specs Aopen AK79D-400 MAX mobo ,512mb ddr, 160gb western digital, xp pro .
View 8 Replies
View Related
