I had some bad sectors on an IBM thinkpad. The computer was booting just fine. I used ghost32 to ghost the drive (not just the partition) to an image and then back onto a brand new drive. Now I cannot get the new drive to boot. The partition is setup just like before and is active but once I get past the IBM bios screen it just doesn't do anything. If I put the old drive in it works fine.
View 7 RepliesI am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
View 14 Replies View Relatedhow to create a image of c drive .. and restore c drive when system crashes? so that no need load operationg system and system drivers.... as well as softwares.
View 2 Replies View RelatedI tried to install my old Nero w/full lic key but it wouldn't.
Giving up the idea... I proceeded to remove every file with Ahead Or Nero in it. Used jv 16 Power tools to remove left overs. Nothing now shows in jv16 or search of all files & folders (with hidden & system showing). Ran CCleaner including other MRUs etc.
make a USB DRIVE bootable for ghost image
View 1 Replies View RelatedIn case you have read my other post(s), I am trying to sort out multiple problems (one related to Windows 7 and one related to XP).
laptop running XP SP3 (32-bit). Just before I take the big step (of doing a fresh install) I made a image on the D: partition with Norton Ghost 12. All went well. Now just in case murphy strikes, I tried to copy the image folder (created by NG12) to my external USB drive
tell me how to make an image (for disaster recovery purposes) on DVDs (not on CDs) using Acronis True Image 8?.I have studied the user's guide and researched on the web, but I cannot figure out how to do it. I have Windows XP Media Center and a brand new HP Pavillion with a LightScribe DVD writer and Nero Ultra 6 (which does have the ability to write UDF DVDs)I need to install many things on my computer so I can get back to work, but first I want to have a good image of Drive C before I do. (I already installed the additional hardware and basic software that I use).
View 14 Replies View RelatedI did a ghost image of my C-Drive as a FAT32 using Nortons Ghost. I have since converted the C-Drive to NTFS. Will this ghost image still work OK if I need to restore my operating system (Windows XP Pro)?
View 2 Replies View Relatedit now wont go past the windows loading screen. I have tried to boot from his windows xp disc (to perform a repair) via changing the boot order in the bios but it wont do it. I even set all the boot orders to go from the cd and still nothing. I have tried multiple xp discs to no avail. If I get into safe mode the drive seems to be working fine. Windows recognizes the drive and that a disc is in there.
View 8 Replies View RelatedHi, my mates pc has died and I have been trying to install XP Home onto a new hard drive for him. I have got a legit copy of XP of my own which I have installed on his H/D with all the latest updates and which is running fine on my backup PC, and will boot in my main PC.
When I try to boot up on my mates PC all I get is the Safe Mode , Last Good Configuration etc. screen and no matter which option I choose it keeps coming back to this screen.
How can I boot from an external dvd drive? My internal drive cd/dvd and floppy in my lap top has expired so I purchased a hpdvd740.
View 1 Replies View RelatedAnyways I want to make My MAXTOR my main Hard drive I set it up as a master and Seagate as slave, however when i do so it doesn't boot from the MAXTOR, i used MAXBLAST 3 to set it as a boot drive and it went haywire is it possible to set them both as Bootdrives, backup my files to the 40gig install XP Pro on the MAXtor move my files from 40 to 80gig and then format the 40 gig.If you did not understand this is what i want/Have
View 7 Replies View RelatedUsing Norton Ghost 9 and Acronis TrueImage 11 on Windows XP service pack 3. Disk cacheing is turned off on all drives and external Drive S is set optimized for quick removal.
Windows - Delayed Write Failed Windows was unable to save all the data for the file S:System Volume Information racking.log.tmp. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. System Restore is turned off on all drives. When I attempt to write an image of 1.5-TB internal drive R onto external USB 1.5-TB drive S, Ghost hangs permanently at 2% with no error message.
Acronis Error on attempting to write image of 1.5-TB internal drive R onto 1.5-TB external USB drive S: ERROR E00070021 Unable to create volume snapshot
I have two hard drives connected to my system. I will refer to them as A and B. I had previously taken a Ghost image of drive A and wanted to restore this image to the drive. However, both the drive were connected to the system when the restore occurred and the image got restored to drive B. Hence I have lost the data I had on drive B. The operating system in use is Windows XP. The version of Ghost used is Norton Ghost 2001
View 4 Replies View RelatedWhenever i boot the system,it says scan C drive.even though i shut down it properly.
I have 2 hard drives that each have an installation of windows xp on them. I was wondering how I can make it so I have a choice of which hard drive I want it to boot to without having to unplug one drive. I have two SATA drives.
View 1 Replies View Relatedonly 1 user, 33 processes, ewido and adaware SE scanned free -- but simply opening a word doc made the system hang over and over. Found I could open and print by running Word and opening the files from the 'open file menu' -- did this 12 times, fine. But try to double-click the same file that just printed -- hangs (and same for other files e.g. image files). the Folder showed on two lines in TaskManager Applications ''Not responding'' and no other applications; I did try cleaning registry ist time ever in nearly 4yo computer, restart seemed fine. But still hung on any particular file even with other applications (ie not just Word). Defragged but no better. Then thought of ChkDsk....It asked for restart to access certain windows files......now I canot tell whether CHKDSK is doing something or its just stuck in failing to boot.
View 3 Replies View Relatedbasically I need to know how to make a pc boot from the HD and install XP by copying the XP CD to the HD. Details & reason below:I've formatted the hard drive on a a friends emachine (by putting the HD into my machine) due to mess with viruses etc.Put HD back into e machine and tried to install XP from an OEM XP CD (genuine windows) - it boots and starts install, copying files to the hard drive fine but when it reboots it doesn't continue the install, but just goes back to the start, wanting to copy the files again.So what I'm going to do is put the HD back in my machine, copy the XP CD to a partition on the HD and then put it back in the machine, boot from HD and install XP all from HD. Question is- how do I get it to boot from the hard drive and start the install?I don't have a floppy boot disk or a floppy drive on my machine to make floppy boot disk. I can set the machine to boot from the HD 1st, that's no problem, just don't know how to set up the HD to let it boot from that so I can run the windows install which will be on the partition on the HD.
View 1 Replies View RelatedWindows XP SP2.I have recebtlky suffered from various Malware and suddenly I have a message Invalid boot.ini booting from C:windows.When I try to recover from CD I get a message that it doesn't recognise the hard drive. Theerefore no restore. I can use my PC but it will re-boot sporadically.
View 21 Replies View RelatedI installed a new hard drive, the only drive, in my computer and installed XP pro. There was a card reader in the computer which was assigned c drive and the local drive was assigned h on the disk. I disconcected the card reader and changed the local disk to c from h in the registery. Now when I turn on the computer the blue screen introducing XP comes on and goes no farther.
View 3 Replies View RelatedI'm having a problem with a laptop that will not boot up.
Lenovo 3000 C100
Windows XP Home
After powering it it up it seems like it does not recognize that the hard drive is there so XP does not boot. No error message. It brings up a Boot Device menu screen with the options to boot from Floppy (does not have one), HardDisk (does not work), CD-ROM or PXE. Choosing HardDisk does not work.
In the BIOS screen the hard disk has the status: "Disable" and there does not seem to be a way to change that. In the BIOS boot sequence the hard disk appears as it should. I've tried reordering the sequence but it makes no difference
Every 3-4days my computer would freeze up while booting up at windows XP screen and scroll bars would freeze.What bohers me about this is i am sure what could be causing this. I use avg as my antivirus,and run A2, spybot,regcleaner, tweaknow on a weekly basis. I keep my system really clean, so now i am wondering is it my HD. PC: Win XP-PRO, 800MHZ AMD Athlon, 1024mb,80gHD. I did what cleaning i could in safemode, it still freeze on scroll bars. I tried last good config, result is the same. The last time i got pass the freezing was by doing a restore.
View 4 Replies View RelatedI didn't open any suspicious emails, shared on P2P networks and certainly made no changes in system files. Only thing I did was what I do periodically. I defragged my hard drive, uninstalled games and went into msconfig and stopped 3 programs from start up (DEAMON tools, PowerISO and SQL service) I was also having problems with the SpyCop package so I uninstalled and reinstalled.
So I restarted (like I should) and the only process it goes through is the DELL start up "splash screen" After that it usually does the Windows XP "splash screen" but it never does the Windows XP screen, it just stays black, nothing. I pressed F2 to see if anything changed and nothing seemed to, as far as I know. I tried F8 to enter safe mode and a couple lines of text show up and stop and hang. I even tried to let it sit there to see if maybe it's just getting used to the defrag job(s) I did, still black. It's still black as I type this.
I had a two seperate versions of windows installed on two seperate hard drives, when i turn the computer on it asks me which one i want to boot from. well the second hard drive is now dying and somtimes it tells me DISK BOOT FAILURE, INSERT BOOT DISK AND PRESS ENTER. now this only happends when the second hard drive doesnt work. I have tried to just unplug the second drive to see if it would boot off of the original copy on the first drive but i get the same thing.
View 7 Replies View RelatedI have a Compaq Presario 900 which doesn't have a working CDrom drive.I took my harddrive out and put it in my friends Dell Inspiron B130 and installed Windows xp SP2. Now that all works fine but(there is always a but ....) when I tried to put the harddrive back into my laptop(Presario 900) Windows will not boot, even if I go to safemode first thing. I thought maybe I could install Windows from the USB port but my BIOS doesn't have a BOOT FROM USB option. Also there is no Bios update that will give me that option.I have tried deleting and installing all the drivers for the Presario then trying to boot like that but it still gets stuck.
View 4 Replies View RelatedMy hard drive crashed. When I start up, the device info is supposed to say something like:"Maxtor 2B020H1" but instead I get "Maxtor eph7 hgnk78l" note: the odd device name isnt exact, but I could write it down and post it if it helps.This all happened when I unplugged the ribbon cable from my m/b. -dont ask- lolWhen I plugged it back in I got that message.I have confirmed it is the hard drive itself, by trying it in a different computer.My second problem is, that was my primary master hard drive. I did not have the operating system on that hard drive but, that hard drive contained the xp boot record or ntldr .
View 5 Replies View RelatedI just put my computer on stand by mode for the first time in my life and now every time i start my computer i get this message " Reboot and select proper Boot device or insert boot media in selected boot device and press a key "And in my setup mode theres no hard drive showing is it gone forever?? Everything was working perfect before i put that accidently on standby mode.
View 4 Replies View RelatedMy friend has a laptop, and the power supply went on it. He gave me his hard drive, so I can back up his data. I removed the hard drive in my laptop, and installed his. When I boot I get a blue screen that says remove any newly installed hard drive or controllers. I cant get windows to boot, so that I can backup the data.
View 3 Replies View RelatedRecently I installed Ubuntu Linux on a partition on my secondary hard drive (it's a worthwhile education, I'll give it that). Since then, when in Windows, the remaining space, used for games, alternates between being accessible and being unaccessible. What's the go?For example, when I go in My Computer and try to open D: drive this is the message i receive:D: is not accessible The parameter is incorrect.
View 3 Replies View RelatedI have Windows 7 installed on my new computer, but my firewire audio card and also some software wouldn't work properly with it, so I put my old hard drive with Windows XP installed on it into my new computer. I can boot up Windows XP from the second hard drive at the bios screen bit, but when it gets to the log in screen, the mouse and keyboard will not respond. I have tried multiple mice and keyboards including the old school style non-USB keyboard. The keyboard works fine to press F12 to get into the boot menu etc but then just stops working completely when XP is loaded. I assume its some kind of driver issue or something like that but I'm pretty useless with computers and I have no idea how I can get my mouse and keyboard to respond in XP .
View 2 Replies View RelatedI'm basically on 'reinstall not booting Windows XP' duty this week. The problem I have is my father inlaw lost his C.O.A of his tower somewhere between his house, his car and my house, (about 60 miles).I can't boot from his hard drive, however I can 'browse/access' it. I've tried a couple of 'retrieve windows key' programs, which work...on my P.C! I have my key tho! I tried installing one into his hard drive but kept finding my key. Is there a command from 'DOS prompt' or some other measure I can take to recover his serial key?
View 1 Replies View Related