Reformatting The Hard Disk: Nothing Shown On Dissplay?
Dec 17, 2006
OK, so I made sure my BIOS was booting from CDROM and first priority, and then HDD. I put the Windows XP Pro CD in and the little windows pop-up screen came up and I exited that and shut down my computer.I turn my computer back on and I cannot get ANYTHING on my monitor.I have two slots on the back of my eVGA 6800 PCI-E card.
Is there a way to partition the primary disk on a computer without reformatting?A computer that I inherited (HP Pavillion) has a 120Gb hard drive partitioned into two sections C drive 104Gb NTFS primary D drive 7Gb FAT32 recovery I would like to split the primary into two sections, if possible without reformatting
I was wondering if anyone can help with reformatting my hard drive. I am looking to reformat and install a clean xp. I have already transfered my files to an external drive. I was wondering if there is a;website if anyone has instructions how to re-format and clean install whats the difference when doing it from windows xp cd or a boot from windows 98?
I get this cyclic redundancy check error when I try to copy files from a DVD-RW onto my hard drive. I burnt said DVD about two years ago using Cyberlink DVD Solution Power2Go. I get this error with mulitiple DVDs, but not all of them (I've got five and I get this error with only three). Also, I get the error with some files, but not others (on the same DVD). I really can't lose these files! My guess is they were burnt wrong, but I'm really not sure. Is there any way I can recover these files?
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
how come when i reformat, if i do a full format NTFS i get an error at 100% saying the disk may be damaged..butu when i do a quick format, it works fine..?
I am having to reinstall XP - the setup starts and then reformats the hard drive. After it has done that it won't start the program installation it just keeps looping and reformatting the hdd
I have decided to reformat my hard drive. I've transferred my files to my backup disk. I need very specific instruction on this process. I could use details regarding process itself and any precautions or hints. I am running Windows XP Professional X64.
I have a gateway amd athlon 1.10 Ghz running microsoft windows server 2003 datacenter edition. The os was installed by my former roommate, without my permission, and I believe it may not be a legal copy. I've been trying to reformat the hard drive and install a copy of Windows XP Professional, which is legal, but it tells me wrong dos version whenever I try to do this. My former roommate also partitioned the drive, also without my permission. I would like to remove the partition as well, but don't really know how.
basically something happened to my computer so i want to reinstall windows xp again. usually it starts up and then when it should normally go to the login screen, it shows a blank black screen. so i tried to boot it from the windows xp cd, and yeah it says 'press any key to boot from cd', or something like that. so i do it and i know after it boots from the cd i can choose to reformat the hard drive...but it freezes every time i press the key to make it reboot from the cd. i haven't seen any online tutorials that go over this..
Ok, I am just about to get up enough enough nerve to reformat my hard drive and have a couple of questions (for now).After reformtting and before beginning the install of XP Pro, do I need to disconnect periphials (printer, scanner, etc)?Do I stay connected to the internet via cable modem and router or should those be disconnected?I have 2 computers networked. Will resetablishing the network happen automatically or will windows walk me through it, or
I have a friend who has a slow Acer laptop. I told him I would be happy to reformat his hard drive and reinstall everything back to it. However I told him if you don't have the XP cd then forget it. lol. Now let's say he can't find the XP cd. What are my other options if I wanna reformat his hard drive?
I have terrible errors in my system. I run Windows XP. It is to the point that my internet is very very slow as are my programs I run. I have tried everything suggested. Microsoft now suggested that I do a full reformat, reinstall & clean of my hard drive. (Start all over from scratch).Can someone lead me into the right direction that explains step by step how I do this? I have backups of most all my programs and everything I think I will need.
we've got a bit of a problem. Our computer came with Windows XP Home Edition already installed by Dell. Just recently my internet stopped working, and my mom changed the administrator password and made the main account non-administrator. Problem? SHE FORGOT THE PASSWORD!So, now, we can't install/uninstall anything and we need to know how to completely reformat our hard disk and uninstall windows so that we can start over fresh. We plan to reinstall Windows with a complete Windows XP Home Edition CD that we purchased separately. We also have another CD that came with the computer, but we're not sure if it is a complete Windows XP Home Edition installation CD. *NOTE* My mom is working with me on this, and she's more computer savvy than me. She's going to be the one reading the instructions. I just type faster
I tried to do a search but I keep getting a blank screen for some reason.I need to reformat my hard drive but the original recovery CD I got from Toshiba is long gone. I don't really have time to wait for another to come in the mail, as I have work to finish within the next day or so. Is there a way to download the necessary drivers and whatnot from Microsoft and burn my own recovery CD to use while reformatting?
ok I was thinking about reformatting. If I just took out my old hard drive and put a new one in, then I could just install a fresh version of windows? Also how would I do like 1 part of it for the os, the other part for my files. This wasy i can just reformat the windows part when i wanna do it again.
I tried to format my hard drive by right clicking the c: drive then clicking format. At the end, it says "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no windows is displaying contents of the drive. Then try formatting again.". This happens all the time.
I want to reformat the hard drive on a Toshiba satellite laptop that has Intel celeron processor and Window XP home OS. Could somebody please guide me through the process step by step? I would also really appreciate it if someone could tell me what all I would need before I start the reformatting process.
I was given an old Dell laptop to try to see if I can fix it. I'm not sure what was done to mess it up, but I thought I'd stick the reinstallation disk in and see what happens. When I put the reinstallation disk into the laptop to reinstall it won't kick in and automatically play. The laptop just sits there. I try to get windows xp to reload using F5, but still nothing. I tried every option under F5 and nothing will load. Its like the computer doesn't have anything in it. How can I just get the reinstallation disk to load?
I have run a windows repair twice, and no luck either time. After the first repair the computer worked fine, until I installed SP2, and lost the taskbar, and couldn't fix that (you can view that thread here: http://forums.techguy.org/windows-nt...tart-menu.html. After the recent repair everything went fine until I tried to install SP2 again. I will start the computer, and windows will load. Everything is fine until the login screen appears (windows XP home ed.). The screen lasts for about 1.5 seconds and then it goes BSOD.
If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
I have two hard drives(40 GB & 160GB both internal) installed in my system. Earlier I had installed windows XP on the first hard drive (40GB) and was using second hard drive as additional storage. I had partitioned my second hard drive into 5 partitions P, Q, R, S, T. Recently I reformatted my first hard drive and reinstalled windows XP. However this has also affected my second hard drive. Now Windows shows only two drives C: (my first hard drive) and D: (second hard drive) as only one partition each. Moreover it is not showing any data on the second hard drive. I want to get back my parition info and data on the second hard drive. I thought that formatting my first drive will not affect second drive and therefore didn't take back up of the second drive. What shall I do to get back my data and partition info.
I'm running XP with a downloaded, update SP2. I got a virus around Christmas and now want to reformat the drive and XP won't let me.It says I cannot dismount the drive to start the process.Something is using it?I just want to learn from my mistakes and start over. Also can I install XP from the discs from my other machine to this one? I do not have a copy of the original OS disc.
While installing Windows XP, the power went out after about 40% of it had been installed. Now, when I turn on the computer, I get a message that says, "NTLDR is missing. press CTRL+ALT+DEL to reboot." Well, this becomes a never-ending cycle. So, I inserted the Windows XP cd in the cd-rom drive and booted the computer up. I tried re-installing XP and repairing XP. Neither works. So, what I would like to do is completely wipe out my hard drive (nothing I want to save) and start all over.
I had a duel boot system running Windows 2000 and linux, I decided to get rid of linux for a while but stupid me just went in to fdisk and deleted the linux partition. Now my 80 gig hard drive only shows as 40 and I can't think of anyway to get it back without reformatting the entire hard drive
I have a laptop that I just got my hands on, it's a Dell Inspiron 8200, has windows XP Pro (service pack 2) on it. I need to reformat it, however, the cd drive doesnt really work anymore (this is the second cd drive its had). I would rather not spend money on a cd drive or anything, and was wondering if there was anyway to use a boot disk to format it, then if there was any way to install network drivers and use a network to install windows. That at least is my present theory of how to go about this, but I'm not sure if it's even possible, and I'm searching around online right now.
i have 2 HDD one with the os and the other one for data.I reformatted my data drive by deleting and re-creating partition via windows xp boot cd. Afterwards it went through the whole windows instillation thing.How can i reformat this drive without installing windows xp afterwards?
having my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
I have and Acer Netbook Aspire One A0A110. I'm trying to run Disk Defragmenter and an error pops up every time when i run it. The scan has been cancelled because an error occured in file :C:ACERPreloadCommandAlaunchXCoadeTracerCoadeTracer2008-11-26-28-39.log. I can't find out what is causing this. Acer sucks because they don't come w/software, but is avail for purchase.