Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
View 6 RepliesI'm trying to install UPnP on my system but I get this error message. The
dll file IS there. I have tried downloading the file from the internet and
Browsing to it on the desktop but it always gives this error message.
Why can't Windows accept this file?
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd.
2. Booted with my Original CP PRO cd (Not bought with my computer bought after).
3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
what should i do?
I am reformatting and reinstalling Windows XP Home in my dell inspiron 600m and I got the following error during the installation:
Setup cannot copy the file vga.dll.
Anyone know how to fix it? What happens if I choose to ignore the warning and install the Windows anyway?
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
I've got a message popped up that says I need to install XP service pack 3.
I let it install, but it gets stcuk on the following error:
"Setup cannot copy the file wscsvc.dll"
It gives the path for the file as:
c:windowssystem32
I've checked in the path and the file definitely exists.
The message below the error says:
"Ensure that the location specifield below is correct, or change it and insert 'Windows XP System Files'in the drive you specify"
This message does not make much sense to me.
Is there a particular application running that could be stopping access to this file?
I've tried closing down all applications: but still no joy.
What am I doing wrong?
i am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
Computer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them...
Trying to add (games) via Add/remove programs - Add "windows components"
Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
View 2 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedDuring the initial Windows XP setup, is it possible to copy the files from the CDROM to the HDD and then continue installation from the HDD? I have seen this done with Windows 98 via the command prompt, assuming it can be done with XP aswell, but after looking through Microsoft.com for 5 minutes I gave up searching
View 8 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedI usually backup my weeks work on Friday afternoons. What I do is run a "search" for all files created or modified within the last 7 days and then "copy" all relevant files to a folder on an external hard drive, and then burn a CD.
Everynow and then, I get the following message. "Cannot Copy File: Cannot Read From the Source File or Disk"
My system is:
P4 3.8
1gig ram
MSI 925XE Neo board with Intel 925XE chipset
2 Maxtor 250gig hard drives in RAID 0 (stripped) (i think)
I seem to be missing vital files for the Intel 82801FR SATA RAID controller.
I run my recovery disk, press F6 to load the controller drivers and insert the floppy. I then choose the SCSI adaptor from the list (82801FR). It then seems to load the file 'iaStor.sys'. After then pressing enter, setup loads some more files then gives me the option to delete the existing partition and then select the unpartitioned space. I then choose to format the partition using NTFS. Then it formats and shows this info;
c/partition 1 (new Raw) 478742 free space
478742 MB Disk 0 at Id 0 on bus 0 on iaStor (MBR)
Once the formatting is finished i recieve the message;
Set up cannot copy the file: iaStor.sys
To skip press esc
To quit press F3
When i skip the file it says;
Setup cannot copy the file: iaStor.inf
When i skip this it says;
Setup cannot copy the file: iaStor.cat
If i continue the installation, the pc blue screens when windows boots up.
I have mutiple floppies from various sources containing these files but none of them work.
These are the files i have on the floppies;
iastor - system file - 457kb
iaahci - security catalog - 8kb
iaahci - setup information - 3kb
iastor - security catalog - 8kb
iastor - setup information - 3kb
txtsetup.oem - OEM file
license
readme
These are the files i need but they just wont copy.
I get this error when i launch a setup file
<<16 Bit Windows Subsystem>> //Title\
<<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\
and there is another button 'ignore'
<<>>
i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
I got the error screen
The file serial.sys is corrupted.
Press any key to continue
... and at the bottom it says
Setup failed. press any key to restart your computer.
Any ideas ?
I'm trying to back up some stuff to an external hard drive. And there are errors in movies that I have ripped (because I either forget to put them back in the case or they get lost) some movies and whenever I try to move the video file (ripped int a AUDI0_TS file and a VIDEO_TS file) I have an error box where the title of the window in the blue bar says "Error Copying File or Folder" and in the window (the gray part) it says "Cannot copy VTS_01_2" Data error (cyclic redundancy check).". And then I click the "OK" button and it stops the transfer. The VTS_01_2 is sometimes replaced with whatever file that cannot be transferred or that is causing the problem. I used DVDShrink and DVD43 to back them up. I am running Windows XP sp3 and transferring them onto a 300 GB hard drive.
View 8 Replies View RelatedI have a problem with copying large files (50MB+): Both command line command "copy /B" and copies in Explorer of large files always risult in a slighly different (corrupt) copy without generating any error message. The number of different bytes is proportional to the lenght of the original. The size of the copy is correct. Position and value of the different bytes vary between each copy.
View 1 Replies View Relatedcan anyone tell me how to repair setup.exe
View 4 Replies View RelatedI read somewhere that I could do a repair installation to see if I could fix it. Well I go through the usual steps until I get to registering components where it goes for about a minute and then restarts. I thought thats what its suppose to do so I wait and wait and it goes through the whole process over so I go through it about 10 times before I realize something is wrong. So I go on my brother's laptop and look up whats wrong and I try opening the comand prompt by pressing shift+F10 and then typing "control sysdm.cpl" to get to the system in the control panel
View 14 Replies View RelatedThen an error message appeared on Windows Messenger I was to sign on as the administrator and correct the registry in which it couldnt (something like that) anyway i am signed on as the admin all the time.Checked registry (run-regedit-enter) found the microsoft keys were all locked, gave permissions to admin and went back to messenger, still an error.So, decided to go into add/remove programs and uninstall or repair, further messages came up, showing an error in the same reg key, could not access.
View 14 Replies View Relatedrunning XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies View RelatedI have Win XP Home Edition, my computer crashed last night and I had to re-install windows. I've been installing all my window updates but I keep getting an error for Service Pack 1. "The core system file (kernel) used to this computer is not a Microsoft Windows file." And Service Pack 2 has been trying to download to my D drive, which is an external hard drive.
View 1 Replies View RelatedI have been reading up on getting a xp setup to work on a usb. On alot of websites it says to copy the i386 folder. On my setup cd i see that it has a amd64 folder. My computer is an amd so do i copy the amd64 instead of the i386? Is the i386 only for intel and amd64 for amd?
View 1 Replies View Relatedim now having some problem on my windows and would like to make a clean install but everytime it gets to 9%,it stucks. the file it is trying to copy is the msimsg.dll. i need to reset the computer to get rid of it.
View 12 Replies View RelatedWhen booting from an old Windows 98 bootdisk to install Windows XP (with slipstreamed SP1) I allways got this message: "Setup was unable to copy cdrom.sys".The problem was known at Microsoft (knowledge base) and they even got a solution for it (dude!).In the config.sys on your disk there will be a line somewhat like this: "device= /d:cdrom" simply change the cdrom to something else like : "device=..... /d:DVDRAM" and it will work.
View 9 Replies View Relatedi am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
What I want to do is create a .bat that will copy a file to several locations(all within the same folder, however with different names).
I have a folder that contains the master copy of my db and I want to run the batch file to update the users db files. The reason being is they each use thier own front end.
I do get the error-message, "while trying to finish a dowloald and after it reached 100% and tries to write the file on the harddrive"
cannot copy file: Cannot read from the source file or disk
I have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
View 7 Replies View Related