File Share Through Network Setup Wizard
Aug 17, 2007
Two computers running windows xp professional and each computer has 3 different NIC cards. 1 wireless, 1 wired through switch and 1 wired directly. I used the network setup wizard to configure file sharing however neither computer can see the other's shared folders. The only firewall running is the default windows firewall. I suspect it has something to do with the different NIC cards and it is trying to find shared folders using the wireless as opposed to through the LAN.
View 8 Replies
ADVERTISEMENT
Jun 11, 2007
I don't know exactly where to post this because I have two issues.I setup a network to share the internet connection and the only personal computer I am experiencing trouble with is the one running windows XP Home the others are running XP pro.Is there something wrong with XP home. I can't get my adapter to work with the personal computer running XP home but one of the personal computer running XP pro has no trouble. I also have a printer that will not work with the XP home.
View 6 Replies
View Related
Feb 17, 2009
1. When I try to run the Network Setup Wizard, I get an error at the very end that Windows was unable to complete the setup
2. When I select Windows Firewall from the Control Panel, I says that it cannot start the service
3. When I select Network Connections>Local Area Connection>Properties>Advanced (tab) it says that it cannot display some of the properties of the connection because WMI information may be corrupted
4. When I try to configure my Intel network adapter, it says that it "failed to load a network component"
5. Also, this is not related to networking but the Windows Updater has failed to install every update for quite a while now.
View 6 Replies
View Related
Aug 23, 2005
The problem is when i try to open excel file from network share which is shared on windows 2000 or windows xp pc , take too much time to open.
View 1 Replies
View Related
Sep 27, 2007
i set up network setup wizard which led to csnw show in the control panel moreover now the way i log in and log off has also changed and when i start my comp it asks for a password.when i press ctrl alt and delete together instead og task manager opening a window security sumthing opens up i want to restore my log in and log off to normal state and delete the csnw **** and restore the task manager.
View 1 Replies
View Related
Nov 7, 2006
I try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies
View Related
Feb 25, 2006
A while back I bought a wired router for my two computers one running XP and one running 98. hooked up the router just like the instructions said, ran the cable hooked it up, nothing happened, ran the network setup wizard made the disk and ran it on the other machine...Nothing happened, brother came over didnt do anything just looked and the other computer was in the network places just like it should be it worked fine the internet worked, file sharing worked, and printer sharing worked for several weeks until a few days ago now the internet works on both computers but cant share files
Jacob
View 3 Replies
View Related
Aug 30, 2005
I want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I
get it to write to my CD on drive E?
View 4 Replies
View Related
Jul 16, 2005
How to redirect the path to "D drive" for share document and the sub-folders like share pictures, share video, share music?
View 1 Replies
View Related
Aug 27, 2007
I just purchased a certified used Lenovo laptop, 3000 C200, 8922-2FU. On booting up, the Client Security Setup Wizard comes up and it has no place to click where you can tell it not to come up again. I do not want to use this feature so each time I have to click cancel and then again click, yes I am sure. Very frustrating. I have tried everything. I called tech support but they did not know so they are researching it and said they would call back.
View 9 Replies
View Related
Sep 11, 2005
Windows XP network wizard wants me to create a floppy disc to use on other machines on my home network. Problem is I have a media card reader that shows as four separate drives under My computer but no floppy disc drive.The network wizard only gives me the option of creating a disc on one of the four media card drives.I can't even browse for another drive.
View 8 Replies
View Related
Jun 23, 2006
What is Windows Starter Edition ? I just got a laptop with xp starter edition on it. It seems that there are a few things that I cannot change in this windows like the windows theme and users etc.Is this a kind of limited windows because I cannot even setup a network on the pc.
View 2 Replies
View Related
Jan 27, 2009
I have reinstalled Windows XP on my Dell Dimension 8000. I got XP installed ok but then need to connect to the internet to update/download all the software I need. Network Setup Wizard cannot find any network hardware. All I need to do is connect the PC to my home network (wired). This all worked before, I just can't figure out how to get the computer to recognise the modem?In Device Manager there is no modem listed. Shouldn't there be one? Is it drivers? I put the Dell drivers disk in which didn't seem to do anything.
View 6 Replies
View Related
Nov 5, 2006
I need to backup my PC, but the backup wizard gives the following message when I choose my DVDR drive as the destination: The backup file name could not be used "E:mybackup.bkf". Please be sure it is a valid path and that you have sufficient access.
View 7 Replies
View Related
Aug 1, 2005
What is the best way to back up my favorites, music, important word/excel files, address book, pics etc. etc. I am currently running XP home edition and don't have access to the XP windows file to add the back up wizard option under system tools.
View 8 Replies
View Related
Jan 26, 2008
I reecently installed Vista on my computer to try it out and after a few weeks wanted to change back to XP Pro as has some things i did not like.
Here's what i did:
1. I booted into BIOS and changed the bootup to cd/dvd.
2. Booted with my Original CP PRO cd (Not bought with my computer bought after).
3. followed the instructions and deleted the partition on C and formatted (Full not Quick) the C: drive with NTFS.
It gets to the stage that the SETUP is copying files and after 43% and says it cannot copy file WOWEB.exe and to press Esc to skip, F3 to QUIT and ENTER to try again.
It does this with a whole lot of files (Over 30) then after skipping thise files it reboots and gets the BLUE SCREEN OF DEATH!!!.
I have 2 DVD drives and tried both with the same result. I tried a differant Windows XP disk with the same results.
The motherboard has a backup facility which i had backed up previously with XP but not fully and can restore to that point but i want a complete reinstall.
I have formatted and installed windows XP with that disc loads of times without any problems before.
what should i do?
View 14 Replies
View Related
Nov 30, 2006
I have a prob
Laptop P4 running XP Pro
Can't load Office XP because I get an error missing setup.ini file.
Ran a spyware but no help.
Any suggestions??
View 14 Replies
View Related
Mar 25, 2008
I am reformatting and reinstalling Windows XP Home in my dell inspiron 600m and I got the following error during the installation:
Setup cannot copy the file vga.dll.
Anyone know how to fix it? What happens if I choose to ignore the warning and install the Windows anyway?
View 2 Replies
View Related
Jan 22, 2005
I am using Windows XP Professional, service pack 1 is installed. A few days ago the PC would not boot up. I had to reinstall Win XP Pro. All my programs had to be reinstalled because Windows did not acknowledge they were there. All 23 of them work fine. Here's where I ran into a problem. I use a Matrox G200 Quad card with TV Tuner. I downloaded and installed the software for the card and that too is fine. When I download the software for the TV part of the card to work, I double click on the unzipped set up file and it starts working, that gets to the part where it says "Preparing to Install" then it just disappears. It worked before the reinstall of windows.How can i figure it out.
View 2 Replies
View Related
Oct 17, 2005
Had to reformat my drive and now whenever i use my win xp sp2 install disc...i first format the drive and create the proper partition..the windows disc then starts copying files to the computer but at a point i get an error message saying that windows setup cannot copy the file...and it tells me which file. I redid this several times and each time at a some point in the copying it gives me this error...each time with a different file name
What should i do at this stage?
View 1 Replies
View Related
Aug 20, 2008
I've got a message popped up that says I need to install XP service pack 3.
I let it install, but it gets stcuk on the following error:
"Setup cannot copy the file wscsvc.dll"
It gives the path for the file as:
c:windowssystem32
I've checked in the path and the file definitely exists.
The message below the error says:
"Ensure that the location specifield below is correct, or change it and insert 'Windows XP System Files'in the drive you specify"
This message does not make much sense to me.
Is there a particular application running that could be stopping access to this file?
I've tried closing down all applications: but still no joy.
What am I doing wrong?
View 3 Replies
View Related
Dec 18, 2005
i am trying to install windows xp pro (sp2) on my new pc but i get this message:
"setup cannot copy the file: sprb0402.dll".
does anyone know what's going on?
hardw:
intel p4 3.0
msi intel 945p express chipset
2x1GB DDR 533 memory (dual channel mode enabled)
msi ati radeon x300HM 128mb
1x HD wd raptor
2x HD wd sata II
View 3 Replies
View Related
Sep 29, 2006
Is there any way to extract a setup file to see its contents.?
View 4 Replies
View Related
Sep 29, 2007
I saved a scanned copy of a letter on my desktop, but the next day the desktop had been cleaned up and I can't find the file anywhere on my PC. I've tried several alternative searche - but to no avail.
My desktop cleanup wizard was on, but I had turned it off many days ago.
I need to find the file as it is a letter to my local tax office (and I did not keep a printout
View 2 Replies
View Related
Mar 11, 2005
I get this error when i launch a setup file
<<16 Bit Windows Subsystem>> //Title\
<<C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close to terminate the application'>> //Description\
and there is another button 'ignore'
<<>>
i tried both choices and neither of them worked
i think it's a compatibility issue but the problem is that i launched the same setup files b4 and they worked,,i have WINXP Pro SP2 and i think i've had this problem after i installed the SP2,,i right-clicked the setup file and i changed some of the compatibility options and it still doesn't work.
View 3 Replies
View Related
May 15, 2010
Computer: Winxp Pro SP2 4x256MB (1GB)(2 Hard Drive, 2 CD Drives)After virus recovery (from Rogue Antivirus) - The issues is we are missing games and some accessory (entertainment) programs.So - thought I'd reinstall them...
Trying to add (games) via Add/remove programs - Add "windows components"
Select accessories Prompts me to put in Win XP Pro cd Getting Copy Error " Setup cannot copy file XXX,XXX It prompts me to use files found in I386 directory. - I see the files it wants but unable to copy.
View 3 Replies
View Related
Aug 13, 2009
My mainboard is an Asrock AOD790GX/128MI am trying to set up a fresh install of windows XP pro SP3 on a single hard drive.I don’t want the RAID feature just the AHCI.I have set OnChip “SATA Operation Mode” option to AHCI and connected my HD to the SATA1 port and my DVD drive to SATA4 port.I have made a floppy disc with the AHCI driver “AMD AHCI Compatible RAID Controller- x86 platform” for xp from the included mainboard CD. The only driver present although I don’t need RAID I have booted my computer with my windows XP CD in. Then pressed F6 when prompted. I then put my floppy disc in with the driver on and press "S" I then select "AMD AHCI Compatible RAID Controller-x86 platform" and press enter.
View 2 Replies
View Related
Mar 31, 2005
In yet another effort to clear up my own "Delayed Write Failed" error, I was trying a suggestion HotFix ( Q331958 ).
Unfortunately, installation of this HotFix keeps failing with the message :
"Q331958 Setup Error Setup could not verify the integrity of the file Update.inf
Make sure the Cryptographic Service is running on this computer."
View 1 Replies
View Related
Apr 28, 2008
Got this error at 20% while copying the data and files.. it prompt me Setup cannot copy the file: kodak_dc.icm If you are installing from a CD, pls put the correct CD inside..the cd are original and it new, i have no problem repair last time..now got this error.?
View 6 Replies
View Related
Jan 19, 2009
I got the error screen
The file serial.sys is corrupted.
Press any key to continue
... and at the bottom it says
Setup failed. press any key to restart your computer.
Any ideas ?
View 2 Replies
View Related
Aug 24, 2005
I am trying to do a repair on IE 6.0 but I cannot get into windows add remove programs. I keep getting the error posted in the subject line. It tell me to contact the system admin. I am the Admin. I am running XP home with sp2 installed. The trouble seemed to start when I unistalled Mozilla Firefox!
View 1 Replies
View Related
