I try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies1. When I try to run the Network Setup Wizard, I get an error at the very end that Windows was unable to complete the setup
2. When I select Windows Firewall from the Control Panel, I says that it cannot start the service
3. When I select Network Connections>Local Area Connection>Properties>Advanced (tab) it says that it cannot display some of the properties of the connection because WMI information may be corrupted
4. When I try to configure my Intel network adapter, it says that it "failed to load a network component"
5. Also, this is not related to networking but the Windows Updater has failed to install every update for quite a while now.
Two computers running windows xp professional and each computer has 3 different NIC cards. 1 wireless, 1 wired through switch and 1 wired directly. I used the network setup wizard to configure file sharing however neither computer can see the other's shared folders. The only firewall running is the default windows firewall. I suspect it has something to do with the different NIC cards and it is trying to find shared folders using the wireless as opposed to through the LAN.
View 8 Replies View RelatedWindows XP network wizard wants me to create a floppy disc to use on other machines on my home network. Problem is I have a media card reader that shows as four separate drives under My computer but no floppy disc drive.The network wizard only gives me the option of creating a disc on one of the four media card drives.I can't even browse for another drive.
View 8 Replies View Relatedi set up network setup wizard which led to csnw show in the control panel moreover now the way i log in and log off has also changed and when i start my comp it asks for a password.when i press ctrl alt and delete together instead og task manager opening a window security sumthing opens up i want to restore my log in and log off to normal state and delete the csnw **** and restore the task manager.
View 1 Replies View RelatedSince upgrading to Windows XP Service Pack 2, my network adapter (a 3Com 3C905-TX-M)does not appear in Device Manager and I therefore can't get this computer to appear on my home network. The network adapter is still working because that's how I connect to the Internet, via LAN to a router then cable broadband,and IPCONFIG gives valid results including the correct IP address from the router via DHCP.I installed a clean copy of XP Home on a spare hard disk. The network adapter appeared in Device Manager and the computer appeared on the network. I then upgraded to SP2 and the network adapter disappeared from Device Manager and the computer no longer appears on the network.
View 1 Replies View RelatedIm trying to install a LinkSys network card, and it doesn't work after I do. When I try to reinstall in device manager, the error I get is "name is already in use as either a device name or service name"I've tried all the obvious... uninstall, reinstall stuff. I know I have to play with the registry to fix this but I dont know where to start. Can anyone help me, because as of now, my mother's computer doesn't get the internet!
View 5 Replies View RelatedI have Windows XP Sp2 whe i try to chanhe ip in "Local Area Connection" i got following message:" Network Connetion Folder was unable to retrive the list of network Adapters":i checked "Services" .Ok working fine then what 's the problem??
View 1 Replies View RelatedI have had my Gateway laptop with Windows XP for about 3 years now. For the past year or so, for some reason my Broadcom 802.11g network adapter has been showing up as having a problem, which has meant that have not been able to use the wireless feature of the laptop. I have lived with it until tonight. I tried to fix it by trying to download a new driver, update the driver, restore settings to a previous date, ect. After nothing working, I decided to do a system recovery. When I did this, it gave me 2 options, one with backup and one without. I chose the backup option and it said everything would be saved to a "my backup" folder. I went through the process which took quite some time. It installed windows and I set the computer up. After everything, when I went to the my backup folder, it only has applications, NO DOCUMENTS. I have TONS of pictures and important documents on my computer that I now can not find. I am panicing as I truley hope I do not lose EVERYTHING. Is there any way to get this stuff back? I have done several searches and nothing comes up. Ironically, my wireless adapter is now working, but I would gladly go back to it not working to have all of my pictures back.
View 14 Replies View RelatedI have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
View 14 Replies View RelatedI need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies View Relatedi have a problem with my network folder.It seems that I can't see my existing network connections in the folder! I first noticed this when i click on my dial-up connection the connection window won't come up.When i open the network connections folder in the control panel, an error message comes up with this message:The Network Connections Folder was unable to retrieve the lsit of Network adapters on your machine. Please make sure that the Network Connections service is enabled and running.
View 6 Replies View RelatedMy network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
View 5 Replies View RelatedI had to wipe clean and install Windows XP on a computer that had a few virus' from work.This is store bought Windows XP, and it can't find the right driver for the network adapter. I have run Belarc Advisor and it doesn't even list a network adapter. Now when this had Windows Server 2002 it could hook up to the internet and browse it just fine. I tried several anti virus programs and none could get rid of the virus this machine had. Hence the wipe clean and install.
View 10 Replies View RelatedI am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
View 7 Replies View RelatedI recently installed Windows XP professional on a new hard drive on Dell Inspiron 6000 laptop. The OS installed fine but now I cannot get onto internet. I have ATT/Yahoo DSL. My laptop has integrated wireless adapter.
When I look under device manager -> network adapters, I only see the following listed:
1) 1394 Net Adapter
2) Bluetooth Device (Personal Area Network)
3) Bluetooth Device (RFCOMM Protocol TDI)
I don't believe any of the above are for internet.
On my other laptop (Dell Latitude D610), under network adapters, I do see:
1) Broadcom NetXtreme 57xx Gigabit Controller
2) Cisco Systems SSL VPN Adapter
3) Intel(R) PRO/Wireless 2200BG Network Connection
Using Latitude D610 laptop, I am able to connect to the internet wireless. What do I need to do to my Inspiron 6000 to enable it to connect to the internet wireless? Under control panel -> network connections, I only see 1394 connection and Bluetooth Network Connection. No LAN 2, LAN 3, Wireless connection, etc.
i just did a clean install on my laptop and upon checking device manager i encounter question sign for (1)Multimedia audio controll (2)Network controller and (3)PCI Modem.Isearch Toshiba site and they do not list my model computer and i have seen the AC97 audio driver elsewhere but it just wont work. Anyone care to point me in the right direction.System is Toshiba Satellite A55-psa50u-03c021, serial number 64094885H, Chipset i855GME. Sound card is AC97(82801db)
View 2 Replies View RelatedWe have a vender that wants to use our printer at work which is hooked up to our network but he can't join our network because he is not an employee.Just spoke to him and he has a Sony Vaio laptop and DOES NOT WANT ANY DRIVERS on his machine. Im lost. I was just going to install drivers on his machine and hook the printer up USB but he just formatted his machine and now doesn't want any drivers at all.
View 7 Replies View Relatedwhen I browse "My Network Places", the browsing is so incredibly slow. It takes a long while when you click one icon in the “My Network Places” for that to open up and go to the next directory or when just first displaying the computers in “My Network Places”, it goes so slow.
I use Windows Workgroup on the LAN to share out internet. Everything else, other than browsing the network, works great. The internet browses nice and fast.
This morning I opened My Network Places while my pc was still loading all the programs at start-up and "My Network Places" was fast. After a few minutes it was back to normal low pace. Now I guess it is something running on my pc slowing it down. Is it maybe to do with XP Service Pack 2? Before installing SP2 the network browsing on my pc is fast, after installing SP2, it is slow. Other computers on the network without SP2 browse the network quite fast.
All the pc's on the network has XP Pro.
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies View Relatedwhen i try to use windows xp new hardware wizard i get the following message
cannot run two device installations you can install only one device at a time
another device installation is underway when it is finished you can try this wizard againit seems to have got stuck trying to install something but not sure what any idea on how to find out what and also how to stop or reset it the ssame problem is stopping upgrading my nvidia driver from the net (other installation in progress)
My problem seems to be in this catagory. I'm trying to install a new AG board. When I get to Hardware Wizard Search and Install options, I type in C:Program (This is where I've downloaded drivers) an error msg. states that there is no device info in this location. I get the same response when I enter the file name. I've battled this driver problem for two days, from installation disk drivers not compatable, to not finding downloaded drivers. Any solutions would be greatly recieved.
View 5 Replies View RelatedHow can I reconnect to the two printers that are connected to a w2k pc, in every login on a wXP? When I try to print, the system asks me to log in the w2k machine.
View 2 Replies View RelatedI'm running Windows XP on a stand-alone pc. I have Norton Internet Security/Anti-Virus installed. I have encountered a pop up window (which will not go away) with the message "New Network Detected". It wants me to select home, office, etc.I don't have any windows firewall enabled, but have Norton taking care of it instead.The consensus I'm getting is get rid of Norton, it stinks. But I would think there could be something simpler/makes more sense to do.
View 7 Replies View RelatedI can't get home to see pro alot of people also can't get home to see pro but pro can see home!
View 3 Replies View RelatedI used Windows Setup Manager to setup an unattended installation of WinXP and place distribution folder on drive C.
View 1 Replies View RelatedThe service 'Network Connections' uses up 80% of my CPU whenever I leave it enabled. I have singled it out, and yes, this is the cause. Toggling it off in my msconfig leaves me with an idle PC (0% usage). However, I cannot get internet without 'Network Connections.'
View 1 Replies View RelatedMy Winxp machine cannot access my home network or the internet. If I boot up in Safe mode I have network and internet access, but in regular mode my Nic card shows a limited connection error. The last thing I installed before the nic card stopped working was Symantec Antivirus corporate edtion over the network.
I have tried to remove it, but it needs the network to access the uninstall file. I also tried copying the uninstall file onto the computer and this did not work. And system restore will not work for whatever reason.
Anyone seen this before or have any ideas?
I have a wireless network with wep encryption yet my b-i-l waltzed in with
his sony and used my network to collect his emails.How is this possible.
Hello
Why would windows xp not find a computer-name, but it does find the ip address ?
I teach at a university. It's final test time. I keep some private files (tests, scores, etc.) on a USB key at work, and some old tests on my HDD. My computer is hard-wired into a static IP address. I also have a D-Link DIR-300 router in between (not sure if it even has a firewall). I was using my USB key today, and something odd happened.My most important files (tests) I keep locked-up with encryption software called Truecrypt, which requires me to enter a password to unlock a secret USB key partition. I had that folder open today, after working with it, and was sitting at my desk interviewing a student for about 10 minutes. Then I went to close out the encrypted drive (which appears as a HDD on My Computer after I enter a password to access it). That's when something odd happened. The message that popped-up basically said that some of the files on that drive were "in use" by 2 other processes, and if I closed it, then those other processes would lose out. That bugged me a bit, because I wondered just what processes were running in there? I have updated anti-virus software on that machine, and it wasn't doing a scan at the time. Usually the drive just closes-out with no warnings like this.
Then, later this afternoon, I left my computer on and went to class. It's set to sleep on its own after 30 minutes. It didn't. The screen was frozen at my wallpaper with no icons. I then tried to CTRL-ALT-DELETE, and another message popped-up that said (again, paraphrasing), "Two other users are accessing this machine. If you shut down now, the connection will be broken." So now I'm wondering. who the heck are these other users, and what's going on? I don't seem to be sharing anything on purpose. Is it possible that someone is sneaking around inside of my machine? I'm assuming network administrators at work can do this if they want. Do you think that's what was happening? The thing that bothers me about that is that they sometimes employ PT students to help with IT. Could a student have gotten access to my entire machine somehow? Again, my antivirus software is up-to-date (Microsoft Essentials), and I switched to a trial of Kaspersky 2011 after today just out of curiousity after this happened.