My problem seems to be in this catagory. I'm trying to install a new AG board. When I get to Hardware Wizard Search and Install options, I type in C:Program (This is where I've downloaded drivers) an error msg. states that there is no device info in this location. I get the same response when I enter the file name. I've battled this driver problem for two days, from installation disk drivers not compatable, to not finding downloaded drivers. Any solutions would be greatly recieved.
running windows xp. purchased faz wizard(from multisource), downloaded software. continued to get error message regarding port problem. working with their support. seems to come down to ms fax wizard driver overrides new fax wizard driver. even went to dos prompt and removed ms fax driver and reinstalled software but still have ms fax driver overriding new driver. do i need to add a port? is it a driver problem? new to this, hope it makes sense.
I need to scan some documents with my dell printer/scanner machine.i lost the installation disk that came with it and i have not installed it yet.how do i download the installation process online.
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
I have XP Home Edition and have recently had to Reinstall completely.I did a backup of the files and settings back in October before my system went kaput and now would like to transfer them to my newly installed version of Windows.I have the properly named file on disk USMT2.UNC with the proper DAT and STATUS files inside but try as I might the wizard will not recognise the path to the folder and will therefore not copy them across.Can SKS suggest why this is please? I have tried copying the folder to desktop but same thing applies.
I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
I'm working on a computer running Win XP. We had previously installed a second, bigger hard drive, so she wouldnt lose any space on her c drive, which is only 9GB. Problem is, she's now down to about 147MB on the C drive, and we are afraid of a crash. Can I use the Files and Settings Transfer Wizard to move some of her programs to the bigger drive?? The new drive is 120 GB, and we want to just leave the operating system on the C drive, and move everything else. We have already run the disk cleanup wizard, emptied temp folders, and deleted unused programs (except for Quicken.it doesnt seem to want to uninstall.
I use the tool files and settings transfer wizard but when i restore the data on the new profile the office outlook settings are not copied. Any way for transfer the user office outlook settings from a profile to one another.
I try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
I have two eMachines both running Windows XP Home SP2 and would like to transfer some files from one to another. However, after I run Files and Settings Transfer Wizard on both computers, connect them with PC to PC serial cable and click AUTODETECT, both machine turn off.
I`m running windows xp 64 bit on my laptop. I had the 32 bit OS earlier but since I became aware that the lappy was 64 bit capable I switched to the 64 bit OS thinking it`d be better.
Took a lot of problem solving but it works just fine, but i`ve kept the interface minimal. The problem is that it says found new hardware twice every time I start the lappy. I have connected to the net. It says can`t find software.
I want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I get it to write to my CD on drive E?
I am having a heck of a time with this. I am trying to install Windows XP on a Lenovo R60e that has a SATA hard drive. I cannot for the life of me find the driver. I cannot seem to find anything resembling this driver on Lenovo's "Driver Matrix" or anywhere else on their site. Is there a generic one out there that anyone knows of? I want to slipstream this into an XP install, but I can't do it without the driver.
Right i had a fried hard drive so i took it to a local store and got them to put a new one on and load windows, great. Problem is i have no sound, for whatever reason windowns xp hasn't found it. Is there a universal driver or something i can install?
Files and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
I had to wipe clean and install Windows XP on a computer that had a few virus' from work.This is store bought Windows XP, and it can't find the right driver for the network adapter. I have run Belarc Advisor and it doesn't even list a network adapter. Now when this had Windows Server 2002 it could hook up to the internet and browse it just fine. I tried several anti virus programs and none could get rid of the virus this machine had. Hence the wipe clean and install.
i have just got this hp scanjet 3770 flatbed,and mistakenly i dint came with s/w cd, apart from contacting manufacturer, can anyone ps direct me to the right URL, where I can find a driver for it and shud i need something else as well ( any s/w)to properly operate the scanner ?Im using Xp Home edition n i ve SP2.i'll be oblidged if anyone directs me to the right spot.
I am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
I have an MP3 player that I want to hook up to my computer, but it is asking for Drivers (MTP Device). After going through the installing driver process, it doesn't find the driver. From what I remember doesn't the Windows Driver Foundation control the MTP devices in the INF folder of my windows directory?
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
I am trying to locate and transfer pst files from a computer that crashed - - reallly crashed. What I am looking for are the contacts (addresses) and the calander that iI used in Outlook. I can still access a limited amount of data from the old laptop, but can't seem to find the pst files.
My dad was using my computer, and I think he did a "system restore" or a reboot. I'm not sure which one because I wasn't there when he did it. (Unfortunately...) I start up my computer and my login is no longer on the login screen. It automatically logs in & starts Windows XP. My desktop has changed to factory setting, there are all these different icons on my desktop now, and it basically looks like it did when I opened it out of the box 2 years ago. I go to My Documents and none of my files are there. Same with My Pictures and My Music. My dad said when he did the reboot/restore the data files would not be deleted. They weren't, and I found them under "My Computer> C> Documents and settings> Owner> Owner's Documents". All of my docs, pics, and music are there. My question is, how can I get my computer back the way it was before my dad messed it up? If I can't do that, how can I get all of my documents, pictures, and music under the appropriate files? I tried to do a "system restore" but it won't let me choose a restore date before my dad messed with it.
somehow i lost a driver file, I have a TSSTcorp CD/DVDW TS-H552L of the four driver files that support this device this one is not in my system, Windowssystem32storprop.dll the provider is Microsoft, the file version is 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158). Please what way is the easiest to obtain a copy of this file.
this should be easy for you forum guys (and gals).. anybody knows a good (and free) software that can find duplicate files on an HD so i can get some HD real estate back?
a while ago someone told me how to get rid of all my temp files while in SAFE MODE by going to START, then RUN and then typing in a command that i simply cannot recall. i've tried *TEMP*, *TMP*, *.TMP*......and many other variations, to no avail. could someone tell me what the correct command is?i just spent a couple of hours trying to see if my question was already addressed, but had no luck finding anything. forgive me if it's there, i just couldn't find it
My laptop recently crashed (most likely, there was something wring with the motherboard) and I have been trying to retrieve my personal documents (pictures, music, etc) in Safe Mode. However, my files don't appear to be there when I boot in Safe Mode and the Desktop arrangement definitely does not look like what I had. All my programs seem to be there, though.Can someone possibly suggest a way to retrieve my information? Note, I can't access my computer the standard way (ie., *not* in Safe Mode).
