I have XP Home Edition and have recently had to Reinstall completely.I did a backup of the files and settings back in October before my system went kaput and now would like to transfer them to my newly installed version of Windows.I have the properly named file on disk USMT2.UNC with the proper DAT and STATUS files inside but try as I might the wizard will not recognise the path to the folder and will therefore not copy them across.Can SKS suggest why this is please? I have tried copying the folder to desktop but same thing applies.
Files and settings wizard does not replace files and settings after re installation. of XP. After several tries I got a copy of FASTconv, a command line program, to extract the files. It has been a long time since I used a command line and the command is complex. I have set the command follows........ fastconv /V /S:source store /D:destination store /T:temp store /I left out the /I switch so all files in the Dir source store would be extracted. Same thing happens when I put in /I switch.I named the Dir. source store, destination store and temp store. When I run it I get instructions on usage and a command prompt What am I missing?
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
I'm working on a computer running Win XP. We had previously installed a second, bigger hard drive, so she wouldnt lose any space on her c drive, which is only 9GB. Problem is, she's now down to about 147MB on the C drive, and we are afraid of a crash. Can I use the Files and Settings Transfer Wizard to move some of her programs to the bigger drive?? The new drive is 120 GB, and we want to just leave the operating system on the C drive, and move everything else. We have already run the disk cleanup wizard, emptied temp folders, and deleted unused programs (except for Quicken.it doesnt seem to want to uninstall.
I use the tool files and settings transfer wizard but when i restore the data on the new profile the office outlook settings are not copied. Any way for transfer the user office outlook settings from a profile to one another.
I have two eMachines both running Windows XP Home SP2 and would like to transfer some files from one to another. However, after I run Files and Settings Transfer Wizard on both computers, connect them with PC to PC serial cable and click AUTODETECT, both machine turn off.
I want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I get it to write to my CD on drive E?
When scheduling a backup using the Windows Backup Wizard, I put in all the scheduling info, but Windows backup never launches. When I look at a scheduled event and click "properties" I get an error message that says "General page initialization failed, etc, etc. (error# 0X80090016)
My problem seems to be in this catagory. I'm trying to install a new AG board. When I get to Hardware Wizard Search and Install options, I type in C:Program (This is where I've downloaded drivers) an error msg. states that there is no device info in this location. I get the same response when I enter the file name. I've battled this driver problem for two days, from installation disk drivers not compatable, to not finding downloaded drivers. Any solutions would be greatly recieved.
My daughter's friend's computer was riddled with viruses and I offered to help. I got down to one virus (internet speed monitor toolbar at the left of internet explorer) and tried to run combofix. I somehow parlayed combofix into a windowssystem32configsystem error and could not boot to windows. I then restored windows xp home edition which gave me the option to save all personal files in C:My Backup 08-01-05 0832PM. The computer now boots but I am unsure of how to restore the personal files and settings.
Hi i am on another computer in my house and i am accessing the shared files from another computer and i accedently deleted them is there anyway i can get them back on that computer?
I'm trying to set up a backup system where I copy changed files to a zip file or directory outside of the regular backup set.In other words,And that would replace anything in D that had been changed in C. Great.But what if I want to save those changed files in C to echanged/%date%? I can't see a way to do this with Robocopy.And in case it isn't obvious, the advantage of using this method is you get redundant backups using much less space. In my experience backups are used more often to recover corrupted files than corrupted harddrives. And the problem with simply mirroring a drive is if the backup runs after the corruption, your backup is now corrupted too. And I know I could keep multiple sets of the whole backup, but that takes mucho space.
I am a 'Novice' to Backups, but am trying to learn.Where is the best place to save Backup files? I am running XP Prof. and carefully ran the Backup utility. I noticed the different options on places to save the files. I noticed I can save it to the 'D' drive (external disc), or my 'C' drive (hard drive). What happens if I save it to my 'C' drive, and my pc crashes.How do I retreive my Backup files, if I cannot turn on my pc? Is it best to save them on disc?
after reading ms + others I have a couple questions the insert disk can only be a floppy? that can't be right todays pc's only have cd or dvd or possible usb any way to write the backup .bkf file to a dvd instead of some hd other than the c drive? the writeup talks about formatting the entire c drive before the new windows install, is it not possible to just just reinstall windows, in the old windows folder, leaving the drive intact, so you still have documents and settings, program files, etc, so that when the asr restores the os image, all the old programs etc are still there ready to run?
what I do regularly is simple backups of these files to external hard drive and DVD+RW's every x months. My point is that I don't keep different series of backups; I just keep overwriting my external drive and DVD's with the current backup, just to have the security of having a double of my data in a different geographic location in case of fire, flood, theft, etc. (knock on wood)
It occurs to me, however, that this system may not be entirely secure. What happens if, between the last backup and the current one, files on my system are modified in a way I didn't want? Or if someone else uses my computer and deletes files? Or if a file were accidentaly deleted, or even corrupted? In any of these cases, when I'd go do a backup, I'd be backing up a snapshot of My Documents that I don't quite want, because, unbeknownst to me, some of the files are corrupted or deleted, and it's not like I can go back in time and pull out a previous backup from (say) 2002 to recover a lost or damaged file. (The reason I won't keep previous backups is because I don't want to end up with an ever-expanding collection of dozens, and then hundreds of disks to keep in storage somewhere ... and even if I did, how would I know that the oldest DVD's in that pile weren't corroding and becoming unreadable over time...)
So what I want is this: a backup program, or separate application I'd run before the backup, which, when I come to do a backup, remembers the files from the last backup, and somehow compares the last backup to my current system (i.e. compares the previously backed-up files to what I'm about to backup), and tells me, before I proceed to overwrite the last backup with the current one, what has changed, in terms of which files are new since last time (obviously there will be new ones ... pictures, mp3's, docs), which ones are no longer there or corrupted (at which point I can make sure that the absent ones have intentionally been deleted since the last backup, and, if not, I can pull them back out of the previous backup and put them back on my system), before proceeding with the overwriting backup.
I looked at the different typical options, like incremental and differential backup, but they all involve constantly adding the new or modified files to an older initial backup, which always increases the number of discs you end up with. Also, those options will always keep the initial full backup on an old disc that's busy rotting away in the humidity. The way I'm talking about makes you always refresh your backup medium, and if your discs are no longer good, then you just replace them. In short, you would always have a fresh, full backup, and are sure that you're not copying corrupted files or that you're missing any, never to retrieve them again, because it tells you what the problems are before you proceed.
You see, normally, an incremental backup would be what I need, because it keeps an original version of the file, and then it keeps all incremental changes to that file over time, such as modifications. The problem with the incremental backup, however, is the principle that you're always needing more and more space to keep updating the original backup. If I'm backup up to DVD's, I don't want to have a new disc every time I incrementally backup my files. Also, how do you know that the original (1st) base backup, made years ago, doesn't now contain files that have become corrupted? Or the same for some of the earlier increments? Furthermore, there's the problem where, if you need to retrieve a file, you'd have to go back to the beginning, retrieve the original version, and then retrieve all the modifications across all the increments to get back to the version you want to get.
The way I'm talking about would be a rewrite your backup onto the medium (external drive, DVD's, solid state, whatever) every time you backup. That way, you always have a "fresh" set, and are not relying on an original base backup from 14 years ago + monthly increments, and don't have to worry about the original base backup itself having become corrupt after all these years.
Also, an incremental backup won't tell you what's missing or what's corrupt. Let's say you have your My Pictures. One of the folders is pictures from a Florida trip 5 years ago, and in it is a picture of when you had just caught a shark while fishing. That's a pretty important picture, and you want to keep it for all time. Well, meanwhile, you go on 20 more trips since that time, with 20 more folders full of pictures. 5 years later, you don't notice it, because you don't review old pictures very often, but that shark picture has become corrupt and irretrievable in your computer. Or, while viewing the pics from that trip one day, you accidentally delete it and don't notice. Or your friend or family member (for instance, a child) goes through your photos and starts deleting pictures. Or what if they open the picture in MS Paint and vandalise it by drawing a male member on your forehead. Now you come to do your backup of your whole My Pictures. If you simply overwrite the last backup with the current one, you're replacing a good copy of the shark picture with (potentially) a bad one ... or if it's been deleted, you're replacing the folder that had that picture with a folder that's missing it, and you'll never retrieve it again. If, on the other hand, you do incremental backups, then your picture is probably in the original base backup from 5 years ago, or else it's in one of the increments from 5 years ago, but who knows what the state is of the original base backup? Those original discs might be unreadable by now, and then there's the whole hassle of going up through the chain to get the pic. Not to mention that under this scenario, you have to notice yourself that a file is missing, and then take steps to retrieve it, as opposed to an application simply scanning and telling you so whenever you want.
Instead, there MUST be a way to do the full backup each time you back up (so you only have 1 set of discs to go into to find your files, and so that it's always relatively new, and not a rotten, corroded set of DVD's from 14 years ago), and that, before it actually does the backup, it tells you first what's missing, modified, added, corrupt between what you had the last time in your backup, and what you're about to overwrite it with now in your current backup.
I understand that the difficulty in indentifying corrupt files of any kind is that there are many different file types, and no program is so complete as to do that scan. But I guess I'm essentially worried about pictures, since mp3's and documents are less of a problem for me.
So really all I need is any application (not necessarily the backup program) to scan particular folders on my drive (only those I want to back up ... essentially My Documents, and not the whole drive) to check only 3 things:
1) which files have been modified (regular Windows xp search can do this if you advanced search for "files modified between ____ and _____", the 2 given dates being, say, the date of my last backup and the date of the current one); 2) which files are missing since the last backup (all this would involve is checking the files against a list ... seems simple ... and manually looking in Recycle Bin is obviously not enough because you may have emptied the Recycle Bin since last time); and 3) which files are corrupted
With the knowledge of these 3 things, I can take action to replace lost or corrupted files by taking them back out of my last backup. Then, I can safely proceed with the current backup.
Not sure if im in the right forum here. I have saved some files and backed up my e mails to an external hard drive as i formatted and re installed a copy of windows xp. When i try to access the files on my external hard drive, i get a message that access is denied.
I restored a backup of the "documents and settings" to a new install of XP but when I try to access the primary (preffered customer folder I get C:Documents And SettingsPreffered Customer is not accessible. Access is denied'. This folder originally asked for a password, which was blank (ie. hit enter).
If a system file was acidently deleted, etc, can this file be replaced from a backup if I had previously performed a backup of all the windows/system files to another hard drive.This would be done using the xp backup tool that comes with windows.
Recently, Windows XP could not Restore the system to Restore Points created by it, OR even to Restore Points set by third-party anti-Spyware programs.I am using AVG Free Edition, PC Tools Spyware Doctor, and also Spyware Terminator, along with the Firewall of Windows XP, for on-line protection whilst surfing the Internet.Additionally, CCleaner and CheckLinks both Freewares are used, once a week or so, to remove unwanted cookies, dead links, temporary files etc.Since these Freewares also create Restore Points, I would like to know whether this affects Restoring of the system to EARLIER Restore Points created by Windows XP. To overcome this problem would it be safe to run the above-mentioned Freeware programs without allowing these to create their individual Restore Points and then create new Restore Points with Windows XP ?
Recommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
I am looking for some backup software that can backup files and folders to another HDD and verify all files are not corrupted, then email me on completion of the backup outcome. Does anyone know of a good backup program that can do this?
I recently decided to start backing up my computer files. I read somewhere you can copy your drive so that way is something goes wrong with your main drive you can still boot from the backup.I have a Biostar P4M80-m4 Mobo, Windows xp is installed. I was wondering if I backed up to an external enclosure could I boot from that in case something happened to the main drive?The program I plan on used is R-Drive Image Since it has a 15d trial. I'm using the copy disk feature.
I need to backup my PC, but the backup wizard gives the following message when I choose my DVDR drive as the destination: The backup file name could not be used "E:mybackup.bkf". Please be sure it is a valid path and that you have sufficient access.
I want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
CAN ACCESS OLD FILES BUT APPS & SETTINGS ARE CORRUPTED
HELP!! I went to install some VPN software on my desktop (Dell Dimension 2350; Windows XP; P4/2GHz; 1GB RAM) and the next thing you know, my OS won't boot. I think I corrupted my registry (again).
"Missing dll NWGINA.DLL. Either replace or contact your system administrator" is the error message that I gOt on a black screen after all attempts at reboot & startup: boot from Windows XP CD, fiddled around with CMOS a little, made every attempt to boot to Windows XP and came up empty.
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
