I am looking for some backup software that can backup files and folders to another HDD and verify all files are not corrupted, then email me on completion of the backup outcome. Does anyone know of a good backup program that can do this?
View 5 RepliesRecommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
View 4 Replies View RelatedI want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
View 4 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I recently got a new computer with windows XP and I want to make a backup copy of my hard drive. I've been using win 98se in the past and always backed up my drive using the "Drive Copy" software and that always worked just fine. I tried using it to copy my new Win XP drive and found that it has a different format called NTFS. My Drive Copy doesn't seem to work with the new drive. Any suggestions? Do I need to reformat the new blank drive I want to copy to?
View 6 Replies View RelatedMy hard rive at the moment it making random sounds sometimes and is poretty much faulty so I am getting it replaced. What I was qondering is that is there any program that will backup my whole hard drive onto another hard drive I have and then when I get my new one all my settings will be the same. by the way I am aware I can just use my other hard drive as mine but I need that for anyther computer later
View 6 Replies View RelatedI am backing up data to an external USB hard drive. What should I backup? I don't have enough room to backup my whole hard drive onto the external. I'm looking for suggestions of specific folders ie. Documents and Settings, etc. as opposed to advice like "whatever can't be downloaded or replaced easily".
View 13 Replies View Relatedi recently added an extra hard drive(40gb)internal to my e-machine running wxp-sp2.the new hd came with files i'd like to clear first.then,i want to copy my entire c (os) to the new d drive.is there a way to do so for free?
View 2 Replies View RelatedMy daughter's HP dv2000t notebook computer had a motherboard crash, apparently (won't turn on). I took the hard drive out and put it into a NexStar-3 USB drive enclosure to try to salvage the iTunes and documents. The folders all show up, but when I try to access her user directory, it says that it is "empty". The properties for the hard drive also say that it the drive is almost full, so the data is all there...somewhere.Is there some kind of security that is tying the user directory to my daughter's computer and dissallowing me to tread her files on another computer? I can see how this would be a good feature if it was stolen, but when I send it back to HP for repairs, they say that they will restore the hard drive to its original condition and wipe out her investment in music, etc.
View 7 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedPC (XP) wont boot, says NTLDR missing.I wonder if anyone could give me any advice about how to salvage my firefox bookmarks from my system which wont even boot. (the bookmarks are all i need to salvage from the c drive as my downloads files and documents are safely stored on my 2nd hard drive) My home PC (windows XP) died a death the other day playing up, wont boot now, says ntldr is missing, wont even boot up in safe mode, it doesnt get as far as giving me an option. (tried swopping cables around and stripped bare to the basics needed to boot but no such luck there either). Boots up with a unix live disc but i noticed it cant detect the c drive on the system, altho it does in bios.
View 7 Replies View RelatedXPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I have a file folder that is 247 MB on XP that I'm trying to copy to my external Passport Hard drive. I've been able to copy all files to the external except this one, but every time I try it elicits an Error Copying File or Folder ie. "Cannot Copy File". What's up with that?
View 1 Replies View RelatedI installed service pack 1 and 2 for WinXP and ever since, these folders have appeared on my hard drives. Windows gives me "Access Denied" everytime I try to delete these folders.
View 1 Replies View RelatedI set up a shared folder on my hard drive for music that my daughter can listen to from her computer. Everything is fine, she can play the music with no problem. I wanted to hear a song, couldn't remember where or what it was named so I did a search for the song and surprisingly, the windows search returned three results for the song I wanted to hear. One song is in my music folder, and the other two songs are shown in the same folder. Here is an abbreviated search result for this one song:
View 9 Replies View RelatedMy computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I
find out which/if this is associated to a particular driver so I can possibly correct it?
I restarted Windows XP one day, thinking nothing of it, however, at the boot up screen, it gave me the message that one of my files was corrupt and couldn't start. No biggie, this has happened to me before, I know how to fix it. However, when I popped in the XP Pro boot disk, it gave me the option to do a system restore (I accessed this by going to install Windows XP, and then selecting the operating system I had currently installed to recover). I chose to do this, thinking it would save me time. It did in one respect, in that I can now start Windows XP, the only problem is that it's now as if I completely reinstalled Windows i.e. all my files and programs are gone. However, when I open my C: drive, all my files are there, I can see them and access some of them, however, others, such as My Documents, I can't access, although they have to be somewhere on my computer, because my C drive is still filled to capacity. I tried searching for files and folders to find some of my documents to no avail. I tried doing a system restore, however, all the restore points I created are no longer there.
View 12 Replies View RelatedI am trying to access the My Documents folders form an older hard drive that is no good (something is corrupted within Windows and the machine won't boot). I am going to replace the hard drive, it's time for that anyway. I have the old hard drive connected to another computer as a second drive. I can see the file structure on the drive, but I can't see the files and folders in My Documents for my old profile. How can I access those files adn copy them to the good drive?
View 5 Replies View RelatedNo matter what I do, when I change the properties of a single directory to either show or not show hidden files and folders, that property then changes in every single directory on the whole drive. I do not click on "Apply to All Folders", I just go to the directory of interest and change the button in Folder Options>View and press "OK". Is there a trick here? Basically I want some folders to show hidden folders, and others to not show them. Right now it's either all or nothing! Again, I am NOT pressing apply to all, which I know will apply all view settings to every folder.
View 4 Replies View RelatedNow however, my hard drive seems to contain approx 13GB of data which I am unable to locate, even when viewing the "hidden files" option. I first noticed this increased used space when I wanted to defragment the hard drive and noticed that there was only 45% free space available (there is usually 75%).I have viewed the properties of all the folders on the C: drive and they do not add up to the 20GB shown on the C: drive properties...The defragment report states that "some files in the volume could not be defragmented"
I have two IDE hard disks one 40GB=C and the secondary 200GB=D,I have made a copy of documents and setting from C to a new folder backup in drive D.After that this operating finished I preformed format of C and installed from on drive C the MS WIN XP operating system.After the installation the backup FOLDER on drive D, changed to backup FILE without extension.How can I restore my DATA? anyone familiar with this phenomenon
View 3 Replies View Relatedcomputer's running a lil bit slow and wont allow me to install my new mobile phone software as c drive memory is full, i've tried my best to move things to the d drive hard disk but its still really full.is there any safe way of transferring most of the programs and files over to the second hard drive?
View 9 Replies View RelatedWhen using system restore to back up your data, you might want to make sure that you are not wasting backup space by saving useless folders that may include temp file or other non-necessary files. To exclude folders, follow the directions below.
1) Open Regedit and navigate to HKEY_Local_MachineSystemCurrentControlSetControlBackupRestoreFilesNotTobackup2) Choose Edit, new, multi-string value3) Give a descriptive name4) Double-click the value and input the full folder path you wish to exclude and click OKSystem restore will no longer monitor this folder and backups will not be made of the files contained in it.
Is it possible to have Windows XP automatically backup selected files and folders when I shutdown?
View 3 Replies View RelatedJust got a new machine and the primary drive is an SATA drive... but I still want to get old files of my old hard drives by hooking them up the the ide connections. Unfortunately, for one drive when I put it in the machine it gives me a missing hal.dll error and when I put the other drive in it gives me a ntrdl missing error. is there any way I can force the machine to boot to my SATA drive when the IDE drive is in there? I suspect it is trying to boot to the old drives when I install them.
View 2 Replies View RelatedIs there a way (on XP), to have password security on shared folders? We have a "backup server," which is nothing more then a workstation with Windows ME, that our users store files on. Everyone has their own folder with a different password. I can't get a HD to work that is larger than 120gb. I have an XP machine with a 300gb HD that I would like to use, but I absolutely have to be able to have passwords on the shared
View 1 Replies View RelatedI have a computer that I need to take all of my existing files off of so that I can erase the HDD. I also have a 150gb external USB HDD. What is the fastest way to transfer all of my files on to my external HDD, and make them so that they are viewable by my other computers. I am running all Dell computers with Windows XP Professional on them.
View 1 Replies View RelatedI noticed lately that the files that are in the attached picture that have the numbers and then _backup just recently showed up on my c: drive and my d: drive. Now they have attached themselves on all my external western digital passport drives drives too.
I cant delete them, they say they are locked. I have also downloaded unlocker 1.8.7 and it wasn't able to delete the files either. I have run system mechanics, prevx malware, kaspersky nitvirus program and didn't find anything wrong. The haven't caused any problems that I know of except I wasn't able to format my d: drive.
AOL Check Up says my Hard Drive is over 85% full, and to get rid of some files. How and which files should I get rid of?
View 6 Replies View RelatedA friend of mine's hard drive was damaged so I replaced it and installed Windows XP on the new Hard drive. This was fine and no problem. In an effort to salvage some of his files from damaged hard drive I connected it as slave and windows recognised it with out a problem. Now the tricky bit! I was able to access "My Documents" on the old HD but when I tried to open his folder(for his profile) I got an "Access denied" message. He then told me that he had a password on his previous windows profile. Since Windows is not booting from this HD and I don't have an option to enter a password, is there a way to access this folder?
View 6 Replies View Related