Ntldr Missing / Hard Drive Corrupt And Need To Backup Bookmarks
Nov 19, 2008
PC (XP) wont boot, says NTLDR missing.I wonder if anyone could give me any advice about how to salvage my firefox bookmarks from my system which wont even boot. (the bookmarks are all i need to salvage from the c drive as my downloads files and documents are safely stored on my 2nd hard drive) My home PC (windows XP) died a death the other day playing up, wont boot now, says ntldr is missing, wont even boot up in safe mode, it doesnt get as far as giving me an option. (tried swopping cables around and stripped bare to the basics needed to boot but no such luck there either). Boots up with a unix live disc but i noticed it cant detect the c drive on the system, altho it does in bios.
View 7 Replies
ADVERTISEMENT
Jun 16, 2005
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
View 6 Replies
View Related
Mar 29, 2006
I recently acquired a 64-bit processor, so I decided to try out the 64-bit version of Windows. I backed up everything on C: and moved it to G:. Then I deleted the C: partition and installed Windows XP 64-bit version on that partition. Then I decided that I really didn't like it, so I ran the Windows Setup disk and deleted the C: partition, created it again, and voila! No more XP 64. Then I tried to boot back into my original version of XP Pro and it gave me the "NTLDR is missing" error. Reloaded XP 64 on the C: partition, copied NTLDR from the XP cd over to my D: drive, deleted the C: partition, and just left it alone this time. Now I get an error with something along the lines of "HARD DISK ERROR...Restart Computer".
View 1 Replies
View Related
Dec 28, 2006
On my pc, I had one drive with Windows 98 on it, and one drive with Windows XP on it
Windows 98 was on drive C: XP was on D: They were set up so I could choose which one to boot to at start up I wanted to get rid of the 98 entirely, so I edited the boot ini, just removing the entry for windows 98 after restarting the computer, everything was fine....going directly to XP so I wanted to format the 98 drive so I could use it as additional storage, which I did using norton partition magic, I then shut down my computer......turned it back on.....and I get an error saying: NTLDR is missing.
View 14 Replies
View Related
Dec 24, 2008
I attached a hard drive as a slave to my computer and I went to command prompt and formatted the drive using format d:.When I put the hard drive back into another computer as the master drive, I get an error message saying "NTLDR is missing" in command prompt. I tried to search on google, but I can only find solutions for systems that already have Windows installed on it.I changed the boot device priority in the BIOS, but I still couldn't get the Windows XP to boot.
View 10 Replies
View Related
Apr 25, 2007
my hard drive will simply not boot. i am having a problem with NTLDR is missing. i have tried at least 4 different methods of fixing it. it will not boot from a floppy drive or cd. the hard drive is about a year old. i think the problem started after i used a cleaning program called PC-decrapifier.. thinking it would speed up my computer.. i would like to fix this problem asap and the hard drive isn't bad, because i can connect it to my other computer as a slave and access my files, but i still can not boot it even in another computer.
View 14 Replies
View Related
Oct 6, 2006
I recently got a new computer with windows XP and I want to make a backup copy of my hard drive. I've been using win 98se in the past and always backed up my drive using the "Drive Copy" software and that always worked just fine. I tried using it to copy my new Win XP drive and found that it has a different format called NTFS. My Drive Copy doesn't seem to work with the new drive. Any suggestions? Do I need to reformat the new blank drive I want to copy to?
View 6 Replies
View Related
Jun 13, 2006
it all started when i went on my second partition which had windows vista beta 2 installed on it, well, i started fooling around and i messed something up, so, i went back into my partition 1 which had windows xp pro on it, so i went into a program on my computer called partition manager, and i deleted partition number 2, or i think i just formatted it again, not really sure, but, then i started downloading the vista beta again cuz i needed to reinstall, so then after the download finished, i restarted the computer and came across an error, windows boot manager wasnt allowing me to go into my first or 2nd partition, when i tried to go on my first partition with winxp pro, it said that ntldr.exe was corrupt, and when i tried on my 2nd, the one i supposedly formatted or deleted, it said boomgr.exe is corrupt, so what i did was installed windows xp 64 bit edition, but i am having problems booting into that as well because my monitor is blank and all it says is output signal out of range change to 1280 x 1024, so im running 64 bit edition in safe mode right now, but what i need help is booting into my winxp pro partition
View 1 Replies
View Related
Mar 7, 2005
My hard rive at the moment it making random sounds sometimes and is poretty much faulty so I am getting it replaced. What I was qondering is that is there any program that will backup my whole hard drive onto another hard drive I have and then when I get my new one all my settings will be the same. by the way I am aware I can just use my other hard drive as mine but I need that for anyther computer later
View 6 Replies
View Related
Jan 5, 2008
I am backing up data to an external USB hard drive. What should I backup? I don't have enough room to backup my whole hard drive onto the external. I'm looking for suggestions of specific folders ie. Documents and Settings, etc. as opposed to advice like "whatever can't be downloaded or replaced easily".
View 13 Replies
View Related
Nov 8, 2007
i recently added an extra hard drive(40gb)internal to my e-machine running wxp-sp2.the new hd came with files i'd like to clear first.then,i want to copy my entire c (os) to the new d drive.is there a way to do so for free?
View 2 Replies
View Related
Oct 18, 2009
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
View 9 Replies
View Related
Oct 28, 2008
I have recently been working on a VB6 Program which was meant to change the registry.After i had tested it, my laptop rebooted suddenly and i got an error saying: The following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is a real pain because i got my laptop off eBay and after a small child hammered the keyboard, the CD Drive Became Bust. I only have a 3.5Inch floppy drive and 10 floppy disks. It is quite old and it doesn't support USB booting When i try using a MS-DOS startup disk, it doesn't show my C: Drive
View 9 Replies
View Related
Sep 27, 2007
Recommend me a free program to basically copy files from windows to the portable hard drive? I don't need compression, and I don't want the entire backup in one file, like .zip or .bkf. Normally I would just copy the files over, but I would lose the timestamps and all the attributes.
View 4 Replies
View Related
Jun 23, 2005
I am looking for some backup software that can backup files and folders to another HDD and verify all files are not corrupted, then email me on completion of the backup outcome. Does anyone know of a good backup program that can do this?
View 5 Replies
View Related
Mar 11, 2006
I want to back up my files to an external hard drive using Windows Backup, but it is not shown as an option. The only options shown are the floppy and f: drives. Can you use this program to back up to an external drive? If so, how do you tell it where to send the data?
View 4 Replies
View Related
Aug 2, 2009
I have my windows XP Partition on the C Drive. I am trying to extract all the info from my D Drive and put it onto an External Hard drive. For some reason it is just not letting me transfer the files. I have tried to send and copy them over with no luck. I have tried using Acronis T.Image, but doesn't work (tells me that there is bad sectors and can't transfer). Tried using bootable disks (UBCD 4 Win, Drive XML, Norton partition manager 9.0 etc. As soon as I start extracting files it gives me and error message and asks if I want to ignore, retry etc. What would you suggest. I was going to run a disk check on this D drive, but I am afraid of it wiping out some of my files. Is there another bootable disk that I should use for extracting my files.
View 4 Replies
View Related
Aug 8, 2005
Running Windows XP home, well-protected from viruses and spyware with all the usual recommended programs. I have a 160G external firewire hard drive, NTFS system. Cannot access data all of a sudden, I am getting an error message, "file system corrupt and unreadable." In disk management, the drive is listed as healthy, 160G, but no NTFS listed. What could have caused this, and is there a way to retrieve the data? Are there any low-cost or freeware programs to do this, or is it inevitable to spend a "fortune?"
View 32 Replies
View Related
Jul 30, 2005
My computer seems to work fine except when I try to do a copy in Casper XP to backup my hard drive to external HD. I also got this stop code last night when trying to do a disk check to correct errors. Stop 0X0000000A (0X00000188, 0X000000FF, 0X00000000, 0X804E35E9). I have located online page for stop 0X0000000A codes which states could be driver problem... that last one parimeter 4 -- 804E35E9 how/where would I
find out which/if this is associated to a particular driver so I can possibly correct it?
View 8 Replies
View Related
Sep 14, 2005
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
View 6 Replies
View Related
Jun 24, 2005
Correct me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies
View Related
Nov 4, 2009
2nd drive no longer shows up in BIOS, my computer, or control panel system hardware. When I checked my C drive, in the control panel system hardware it's now listed as a SCSI hard drive, and includes a SCSI controller. How do I convert it back to a standard IDE SATA hard drive. And is this transformation is the cause of my lost 2nd drive?
View 4 Replies
View Related
Feb 14, 2009
I initially had a problem with my xp which came up with a missing Hal.dll file and wouldnt boot. I tried using the xp recovery disc and eventually tried using Fixboot, thinking (foolishly?) that this is would help fix it. It now gives me a NTLDR error... Any suggestions as to how to fix this, have even tried slaving it externally but it only shows up a small completely empty drive at the moment, either 10mb or 10gb cant really remember,
View 14 Replies
View Related
Mar 11, 2008
I am trying to set up a new computer and am using a HD that I formatted with my other PC so it would be empty. I am trying to install windows on the HD and I get the error NTLDR is missing.
View 13 Replies
View Related
Nov 30, 2004
Im getting a new hard drive to replace one that failed. My OS is on the old drive but I want to move the OS to the new drive (b/c it will be clean and free of spyware and such...I want a clean install) when i recieve it. If i install the OS on the new one (which I will designate as the master drive), and i boot up, (then delete it from the old drive) will my computer get 'confused'? How should I go about doing this? I dont want to lose any of the data on the 'old' OS drive so I'm scared to remove Windows from it.
View 11 Replies
View Related
Jan 26, 2006
I deleted some base files on my C: the files were not in a folder just right on my root C:well i hit restart and now when my computer wont boot. it says."NTLDR is MISSING.. press CTRL + ALT + DEL to restart."well i went to this website.
View 13 Replies
View Related
Jul 5, 2005
My son has phoned me. In spite of loads of precautions he is in trouble again.Three months ago his Mesh desktop gave him the thumbs down when his Maxtor 160Gb failed. he bought another and another copy of XP Home because he couldn't put his hand on the first one (money to burn).HD1 has been formatted and set upo with an installation of XP in reserve. His usual copy is on the new Maxtor, HD0. I understand that all of his data is held in separate partition and that he has a backup of his O/S using Acronis True Image v8, and a bootable rescue CD. Hid HD0 failed and he tried to format it to restore his backup. No go.Now he can't get his XP on HD1 to boot. His rescue CD won't boot.His True Image install disk which can be a rescue disk won't boot andall he gets on POST is "NTLDR is missing".
View 8 Replies
View Related
Oct 9, 2006
My computer started this last night,after power beening off for a while.NTLDR is missing ctrl+alt+del to restart.I can't get my recovery disk to work,it quits after about 5 min.Sometimes the dvd burner won't open,so i can get it out.I gave up on it after a while.It so nerve racking.Hope someone can help me,its my kids computer.
View 14 Replies
View Related
Jan 14, 2006
I recently reinstalled XP Pro on my computer. There's usually no problems but now after the install, if I set the bios to boot from my hard drive I get the message NTLDR (or something near) Is missing press ctrl alt del to reboot. I do this and the same thing happens.
However, if Iset it to boot from CD and then ignore the "press any key to boot from CD" MEssage it then skips and boots files
View 3 Replies
View Related
Jun 9, 2005
Computer is an HP pavilion notebook zd7000. XP Pro. HP recovery does not seem to be an option on this notebook. I did have this pc in for repair once before as user loves to download music, etc.. and I do remember having to load format and load from the xp cd.
View 7 Replies
View Related
Apr 9, 2008
I have had the following error message appear when i start my PC NTLDR Missing, When i press ctl alt del to restart the same things happens and i go around in circles. I have put the XP disk in to hopefully boot from that but the PC will not pick up the disk and start from it. I have looked in the bios to change where the system is looking but still no joy, can anyone else point me in the right direction?.
View 14 Replies
View Related
