I am having a heck of a time with this. I am trying to install Windows XP on a Lenovo R60e that has a SATA hard drive. I cannot for the life of me find the driver. I cannot seem to find anything resembling this driver on Lenovo's "Driver Matrix" or anywhere else on their site. Is there a generic one out there that anyone knows of? I want to slipstream this into an XP install, but I can't do it without the driver.
View 4 RepliesEvery time I try to install the si3112 driver I get an Install key fail error followed by an install driver error. I have tried to install it off both a floppy and the nvidia cd and both give me the same errors.
I have no trouble installing the si3112r driver (the raid) version' but I want to use it as my start-up drive. I have a GA-K8N PRO mobo and the drive is a WD3200ks. If I can't get it to run where can I download a replacement dirver from --with-out haveing to download a huge driver package?
I am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
View 7 Replies View RelatedI have purchased a Acer Extensa 5230E-2177 with Windows 7 and wish to install XP pro.The system needs an F6 sata driver during the Xp install?Do you know where I can locate one?
View 6 Replies View RelatedI recently bought a dvd drive online but I find it has what I think is a sata socket. Can anyone tell me where I can see a picture of a sata socked so I can be sure, I can describe it looks rectangular with two plastic bars running parallel in the centre one longer than the other with little dots at the bottom.
View 6 Replies View RelatedI'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
Iv got a Gateway MT6705 laptop with Windows Vista Pre Installed and I dont like it one bit. But when I went to install Windows XP Professional SP2 It says No hard drive found. It has 120Gb SATA hard drive installed using a Intel SATA Controller.
View 1 Replies View RelatedI have a Gateway 7422GX which as a Mobility Radeon 9550. I repaired windows using the cd because I restarted my computer and it was either going to take 7min+ to boot, or just wasn't going to. I got stuck at the windows splash screen. I'm using windows professional. Whenever I try to install any of the drivers, I get the same error message: Setup did not find a driver compatible with your current hardware or operating system. Setup will now exit.
View 10 Replies View RelatedI have this seriously big problem on my computer (well why else would i be here)i have a ACER Aspire L100 which is a VERY good pc.it used to have Media Centre edition as the operating system but it suddenly stopped working. so i was forced to install windows xp home edition.now when i install the sound driver ever time i try and open up a media program such as media player or itunes and turns around and tells me that there is a problem with the sound card and another program must be using it. The graphic driver is the other driver that wont install properly. when i run the installation i get a message that reads
ive tried and run windows update but it doesnt find anything.
Thanks in advance
Peter
I'm getting a Bad_Pool_Caller BSOD, along with some misc. BSOD's while trying to do a fresh install of Windows from a SATA Cdrom to an ATA IDE harddrive. Are there any known issues with trying to install an OS from SATA to IDE?
I was supposed to have SATA hdd as well, but shipping screw'd up, and I got sent an ATA instead. I'm pretty sure that I will be able to figure out the solution tomorrow when I get to record the other information on the BSOD screens. I was just curious if there are any known issues or negatives associated with writing from a SATA cdrom drive to an IDE?
I'm getting extremely frustrated with a problem I keep encountering trying to install a new SATA Hard Drive. I connect the SATA HD power & data cable I prepare a FDD with the necessary HD Cotroller Drivers from the motherboard utilities CD I boot the PC I insert my XP Pro (SP2) CD The PC boots from the CD I press F6 when prompted for 3rd party drivers When prompted, I install the necessary drivers from the FDD I then get to the bit where I chose to install Windows rather than do a Repair - when I select install, I'm told that no HD is present & that I need to exit by pressing F3 I've tried removing RAM to see if any is dodgy but still encounter the same problem.
I've attached the new SATA HD to a different PC & everything moves on perfectly but I quit before formatting the drive as I want to do a clean install on the other PC. I'm beginning to think that there might be a problem with the Motherboard but am open to suggestions (the old HD is stuck in an infitinte boot loop & am unable to slave it to another HD as it wont respond - maybe caused by a Motherboard problem?).
This is the first time i have tried to format a sata drive. I put the disk in and boot from the cd and it goes straight into the xp splash screen it doesn't even give me the chance to hit f6 thats the first problem.
View 4 Replies View RelatedI cannot install Windows XP onto a SATA hard drive. I read that I need to install the drivers for the HD separately during the Windows installation but how do I do that.
View 3 Replies View RelatedI can't install Windows to the SATA drive. It loads everything it needs, then when it tries to boot, it says the files aren't found. I'm guessing it can't read it without the drivers installed, but how do i do that with no OS? I was thinking of dual booting with linux.
View 2 Replies View RelatedAfter my last hard drive took a nosedive, I went out and bought a Western Digital Serial ATA 500 gb harddrive. I've physically put it in my Sony Vaio Desktop. I am trying to install Windows XP Professional now. When I get to the Setup screen is says Unknown Disk. I've already seemed to install the drivers for the new harddisk (they provided me a CD to install the drivers, it came with a program called "Lifeguard Tool" or something like that.
I have tried pressing F6 to install a RAID driver using the Windows setup... I pressed S... but then I find out I need a floppy disk drive... even if I had one, the box only came with a CD and not any floppy disks. I've tried slipstreaming Windows xp cd, service pack 2, and the drivers onto one bootable cd, it did not work... i'm too tired to go in there and find out why. *sigh*
I recently bought a WD 74GB Raptor harddrive to install XP on, but I'm having problems. Every time I load up XP setup from the setup CD, when it gets to the part where the installation options menu is about to appear, as it tries to boot windows from the CD, I get a BSOD and have to restart. I've tried running the CD with my other 80GB WD IDE hard drive inside and it doesn't cause this stop error. I've been screwing with this for 2 weeks now trying everything I can find on google and forums to fix this problem. I have the correct SATA drivers for my board as well for the drive of which I hit F6 for at the beginning of setup.
View 1 Replies View Relatedfirst and foremost is considering I have all of the old videos, files, pictures etc on my 80 GB Maxtor that I plan on transfering to the SATA hard drive since it's faster and I'd like to use the SATA as my primary...so all in all that makes things complicated in itself.
What I did was got everything ready, I didn't back up anything from the Maxtor (IDE) because that is out of the plan since I hope to do a simple drag and drop transfer of all the old stuff to my new SATA hard drive. I went into my BIOS and set the boot priorty to the SATA and it detected my SATA drive fine. I got out of the BIOS and inserted my Win XP upgrade disc. I let it go and also inserted the SiS 964 RAID Installation support disk so that it would install the SATA controller that was included in the Foxconn mobo. Then keeping my IDE drive intact, I deleted and formated the SATA to create a partition and installed XP on it......
My computer uses SATA HD. Right now it functions properly and boots into
Windows just fine. But I need to reinstall the XP Pro. So I boot from the CD
but the setup does not see any HD. Are there any special instructions on
installing on a SATA HD?
I'm having problems with windows xp on a laptop with preinstalled vista that has no floppy drive, the error "It doesn't detect the SATA HDD"; I tried the solution with a usb floppy drive and pressing f6, I found the correct driver and it works fine, I`m able to partition the HD and the process continues until it asks for the driver again but the USB floppy drive doesn't wortk in that part of the installation.
The next solution I found of this forum was making a custom XP CD including the SATA drivers with NLITE software, incredible software, without pressing f6 the HD is detected and again I'm able to partition and the installation begins, almost success!! but ... when it reboots to continue the installation it does't detect the HD again a lecture error displays and the classic press ctrl+alt+del to reboot!!! Am I missing something?
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
View 2 Replies View RelatedWill this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies View RelatedLong story short - Athlon/mobo on old unit died, 3 hd's (all WD eide 80 [C:], 40 [F:], 80 [G:]) & 1.5 gb memory good until mobo failure. Had shop install new mobo along with intel duo processor, new ATI video card, reinstalled memory & both 80 hd. Installed WD SATA 160 [replacing WD 40 hd] & tried to make it master boot record. Had shop transfer files from old WD 80 [C:] MBR to SATA 160, leaving files on 80. Did an repair install of xp on old 80 hd. Wouldn't boot. Tried reinstall of xp on SATA 160 & rebooted. Able to do so, but couldn't access internet for updates. Got sp2 update disc from technician & updated, then restarted.
View 9 Replies View RelatedI was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies View RelatedI`m running windows xp 64 bit on my laptop. I had the 32 bit OS earlier but since I became aware that the lappy was 64 bit capable I switched to the 64 bit OS thinking it`d be better.
Took a lot of problem solving but it works just fine, but i`ve kept the interface minimal. The problem is that it says found new hardware twice every time I start the lappy. I have connected to the net. It says can`t find software.
I have integrated the drivers onto the windows xp home disk using nlite as well as integrating sp2 but after the restart it keeps saying failed to load os, why should I do to install it on my sata drive? this is making me consider consider vista, does vista install to sata drives straight from the disk?
View 1 Replies View RelatedThis is similar to the problem B1177 posted about, but I'm having no luck solving it myself. Basically, I have an IDE CDROM into the mobo, and a SATA HDD hooked to a Koutech Initio-chipset SATA controller card. In the card's setup at boot, it says the drive is "passthrough". I confess I'm not sure what that means. I'm new to SATA. I slipstreamed the Inic1620 drivers into a new CD with nLite, which stopped the "Setup cannot find any hard drives..." error, and allowed Setup to continue. After loading files, however, on restart I get the ever popular STOP 7B BSOD. Windows DOES begin to start, and the splash screen shows for a second or so, then it's into the ol' freezerino. Email to Koutech support has gone unanswered.
The machine is a Gigabyte 6IEML/P3900/500MB with an Intel 82815/801B chipset. I also tried restoring an image from another machine with an Intel chipset--though not the same one--and it stops at mup.sys, but that may have nothing to do with the SATA card. Interestingly, although Windows Setup couldn't find the drive, a Hiren's CD, with no SATA drivers loaded, could. Actually, a bit more than interesting isn't it?
Doing a fresh install of xp on a sata drive. When it asks to press F6 to install the third party drivers will I be able to load off the motherboard driver cd, or does it *have* to be a floppy.? Reason is the folder that contains the driver info on the cd is over 6mb so obviously won't fit on a floppy..and I'm not sure which I need to complete the install. If I habe the driver cd in the second cd drive will I be able to browse to it when asked? Failing that, just what info do I need to put on a floppy?
View 4 Replies View RelatedI want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies View RelatedI want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)