Fresh Install On Sata Drive - Does Have Floppy?
Oct 18, 2005
Doing a fresh install of xp on a sata drive. When it asks to press F6 to install the third party drivers will I be able to load off the motherboard driver cd, or does it *have* to be a floppy.? Reason is the folder that contains the driver info on the cd is over 6mb so obviously won't fit on a floppy..and I'm not sure which I need to complete the install. If I habe the driver cd in the second cd drive will I be able to browse to it when asked? Failing that, just what info do I need to put on a floppy?
View 4 Replies
ADVERTISEMENT
Jul 11, 2005
when i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies
View Related
Jul 11, 2007
I'm having problems with windows xp on a laptop with preinstalled vista that has no floppy drive, the error "It doesn't detect the SATA HDD"; I tried the solution with a usb floppy drive and pressing f6, I found the correct driver and it works fine, I`m able to partition the HD and the process continues until it asks for the driver again but the USB floppy drive doesn't wortk in that part of the installation.
The next solution I found of this forum was making a custom XP CD including the SATA drivers with NLITE software, incredible software, without pressing f6 the HD is detected and again I'm able to partition and the installation begins, almost success!! but ... when it reboots to continue the installation it does't detect the HD again a lecture error displays and the classic press ctrl+alt+del to reboot!!! Am I missing something?
View 14 Replies
View Related
Apr 11, 2008
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies
View Related
Nov 25, 2006
I want make a floppy disk in order to instal XP Pro SP2 in a Sata-2 HD.(Mobo recognize it as Sata-1)Where can I find latest files?Or I could use the ones which are in mobo's cd-rom? Mobo is Asus A8V Deluxe 2.0, agp, bios 1017.
View 12 Replies
View Related
Dec 24, 2008
I cannot install Windows XP onto a SATA hard drive. I read that I need to install the drivers for the HD separately during the Windows installation but how do I do that.
View 3 Replies
View Related
Dec 10, 2006
I can't install Windows to the SATA drive. It loads everything it needs, then when it tries to boot, it says the files aren't found. I'm guessing it can't read it without the drivers installed, but how do i do that with no OS? I was thinking of dual booting with linux.
View 2 Replies
View Related
Jan 23, 2007
OK, I just finished building my PC, but I can't figure out how to install XP (don't stop reading, it isn't that easy).I get XP Pro SP2 through the Microsoft Campus Agreement for free, since I'm a full time student, it's legit.Problem is, they can only provide it as a self extracting executable.I can't get it on a bootable cd.I want to do a clean install, without installing a previous version of windows and then installing XP pro on top.
View 15 Replies
View Related
Aug 28, 2009
need floppy disks that already have the sata drivers loaded
View 1 Replies
View Related
Mar 3, 2006
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
View 3 Replies
View Related
Aug 14, 2007
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
View 2 Replies
View Related
Feb 21, 2006
Just downloaded the "Checkit PE Diagnostic ESD for DriverAgent" onto a floppy diskette as directed by DriverAgent.com. After placing it into the floppy drive and rebooting as directed, the program began to boot but hung up about halfway through the process and the PC would not boot until I removed the flopppy and then all worked well, except.now the floppy drive will not respond to any commands and the PC freezes completely. It will not respond until I manually shut it down from the tower button. Once I fire it up again all is well until the same happens if I try to use the floppy drive.
View 7 Replies
View Related
May 14, 2007
I have integrated the drivers onto the windows xp home disk using nlite as well as integrating sp2 but after the restart it keeps saying failed to load os, why should I do to install it on my sata drive? this is making me consider consider vista, does vista install to sata drives straight from the disk?
View 1 Replies
View Related
Feb 27, 2010
I want to install Windows XP on a new SATA HDD drive. The computer in question came with Windows Vista installed. There is no IDE option in the BIOS. There is no floppy drive on the unit. So it looks like I might have to slipstream all the drivers, etc., on to the unit (which I have no clue how to do). I do not have the motherboard make or model number, nor do I have the motherboard CD. My business partner is trying to take the cover off the laptop as we speak, but we're having trouble getting it off. Thus, as of now, we can't identify the motherboard manufacturer or the serial number.
Can anyone here point us in the right direction? The computer in question is a Compaq Presario c769us (laptop). It was purchased in June 2008. This all started when my business partner decided to use a Vista System Recovery CD to overwrite the existing copy of Vista that he had on the computer. After he ran the disk, the system stopped working. So right now, we have the old hard drive, which contains a non-working copy of Vista on it (which we can 't delete), and we have the new hard drive (a 250 GB Hitachi). So maybe we could just delete the copy of Vista on the old hard drive - the self drive test checked out okay on the old hard drive. So I guess the two options are - figure out a way to put XP on the NEW hard drive, or figure out a way to put XP on the OLD hard drive and delete Vista from it first. If we can put XP on the old hard drive and remove Vista from it, we could take the new hard drive back, and get our money back, too.
View 14 Replies
View Related
Mar 11, 2009
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
View 8 Replies
View Related
Feb 9, 2009
Mobo is Biostar p4m90-m7c fe
Bios finds 320G SATA drive fine.
Put Win XP HOme (original version from wayyyyyyy back) in cd=drive. XP boots from disk and sees the drvie but ONLy as 130 or so Gigs. I realize this is a limititation of xp prior to all the service packs, but how do I get around it? BTW there is no Floppy in the computer (none of my puters have working floppys!) I thought I'd be tricky and installed the disk to my other winxp machine and formatted the drive into a 40G and 280G partitions both primary the 40G first. Retried the new machine and it didn't recognize the partitions and listed only one unknown drive of about 130 gigs.
Looked int he bois and didn't see a setting for ide/raid for the sata. I've read where you can F6 durring the install and load additional drivers but all those post linked to external sources for key information and those links were dead. How can I get around this limitation? If I need to load drivers during the install I assume I can burn them to a cd on my other computer and f6 during the install to load them, but what drivers am I looking for if this is the way to go? If not how can I get all of my drive available. I did try simply letting install format the 130 partition hoping that when I finished the install the rest of the drive would show up as unpartioned but that didn't work out.
View 12 Replies
View Related
Dec 31, 2006
My computer got a harsh virus on it that is giving me problems so i'm left with no choice but to reformat it.
but here is my problem..
when i get to the partition part of the installation, it shows that i have 2 drives.
C: my main drive that has 70GB
D: Recovery drive that has 10 GB...
so, how should i approach this.
I just want 1 copy of windows XP running on my computer.
View 11 Replies
View Related
Jun 7, 2008
Well i tried to install windows on a used 80gig hd. It ended up hanging at the Setup is inspecting your computers hardware configuration. So i searched around a bit and it said my hd needed to be repartitioned so i said instead of that id go out and buy a new 500gig that was only 80 dollars. So i put the hd in and tried with this and it still hangs at teh same screen. For some reason i cannot get passed the "Setup is inspecting your computers hardwear configuration" screen. I then put in another CD of windows but the 64 bit version to try that one to see if it were the CD that were bad. And it went straight into the setup but then did not recognize my harddrive was there.
View 3 Replies
View Related
Oct 27, 2007
Have installed new hard drive, a 500GB Samsung Spinpoint, slipped in my XP disk - and windows setup says this:Windows XP Professional Setup.Setup did not find any hard disk drives installed in your computer.Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.Setup cannot continue. To quit Setup, press F3Could it be that Windows Setup is not seeing the HDD because it is SATA, may need specific drivers or similar? Vaguely remember this happening the last time i installed the OS on this system, but this was years ago. It appears in the Bios on bootup, so the machine itself is counts it as present.Running an AMD Athlon� XP 2800+ on a DFI Lanparty NFII Ultra B motherboard, with 1GB of RAM.
View 14 Replies
View Related
Mar 17, 2007
i have a p5s800-vm mother board of asus and the setup of windows xp (pro-sp2) dont find my hard disc and i need to make a floopy from the drivers on the disc to help it found the hard disc. that what i do to make that floopy (as some nice guys here tell me to) i go to the drivers folder on the disc of the motherbord than chose "raid" folder in it i chose the floopyimage folder there i have 3 folders
1.964plus180(181)
2.964_180
3.965_965L
the guys here tell me to put the files of the 965_965L on the floopy without the foler imself. so in the 965_965L folder i have two files "SISRAID and "TXTSETUP.OEM" and aonter folder calld "raid" and in it i have to folders "winxp" and "win2000" and each folder has its own file. so what i do was to put only the "TXTSETUP.OEM" file on the floopy without noting else cause someone here tell me it all i need to do......
View 6 Replies
View Related
May 16, 2006
My hard drive recently crashed and I reinstalled windows xp, the copy i brought with the product key turns out to me fake or blacklisted by Microsoft, the problem is i scanned the disc used for installation and it contain more than a few adware programs and viruses. My PC is operating noticeably slower than before the crash, I scanned my RAM with MemTest. There is also a couple adware programs that comes up in processes, only bitdefender blocks it from popping up when using the internet. Also my Primary IDE channel is using PIO Mode instead of DMA, ive heard this can be because of viruses, should I reinstall windows?Could this mean the windows has been modified and what should i do?
View 10 Replies
View Related
Apr 18, 2005
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
View 1 Replies
View Related
Sep 25, 2007
I have just installed a fresh copy of windows XP sp2 on 2 machines. Both Dell Optiplex desktops. Usually it prompts that it has found new hardware for each device it hasn't found drivers for. Device manager lists them with a yellow exclamation icon.Problem I have now though is that the fresh install of XP does not show these prompt at all, although device manager lists them and if i go in there and update driver the device works.The problem I have is that basically i usually copy a driver heirarchy to the systemdrive and point the registry at them, which results in automatic installation on boot. This no longer works and I assume they are related as it doesn't look like it's automatically trying to install these devices.Is there a setting somewhere, seems very strange, what with it being a fresh install?
View 11 Replies
View Related
Feb 14, 2005
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
View 9 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Apr 24, 2005
Does Windows XP self boot and copy the necessary system files or do you still need a floppy disk drive like previous windows versions?
View 1 Replies
View Related
Feb 13, 2006
i need some help to install win xp at my sister notebook. The problem is her notebook does'nt have floppy & cdrom drive. Actually this notebook already xp in it but many problem occur (always freeze) and i decide to format and reinstall xp back Is that possible to format/install notebook from other than floppy & cdrom?
If it so then how?Anyway, the notebook model is
Acer Travelmate 340T
Pentium 3, 128 memory
View 9 Replies
View Related
Oct 3, 2009
"Floppy Disk not Recognized in Clean Install"
I am attempting a clean installation of Windows XP on a new disk. I have 3rd party drivers to install but the system at this step fails to recognize the floppy drive. At least it fails to respond to the F6 > S > 'Insert ... floppy disk ...' sequence. The drive is required for the floppy disks on which the drivers are located.
Is there a way around this, putting them on a CD or USB since some computers are coming now without floppy disks.
BTW the floppy drives works with an Alt. Boot using Win 2K Pro
View 2 Replies
View Related
Aug 21, 2008
I had two computers -- one was a Windows 98 and the other an XP. I had four files on my 98 that I wanted to keep before I got rid of it, so I saved the files onto a floppy (the internet wasn't working on the 98). I have an XP that has a floppy drive, so I thought it would be fine.Some of the four files are rtf (WordPad) or doc.When I inserted the floppy, "A:" showed up, and the first two files transferred over to my desktop fine. As for the last two, when I double-click or try to open it in a window comes up, a different message pops up each time. One time it said, "The disk in drive A is not formatted. Would you like to format it now?" When I tried to open one of the rtf files in WordPad, it said that it couldn't open Word 6.0 files.
View 7 Replies
View Related
Jan 28, 2008
I'm getting a Bad_Pool_Caller BSOD, along with some misc. BSOD's while trying to do a fresh install of Windows from a SATA Cdrom to an ATA IDE harddrive. Are there any known issues with trying to install an OS from SATA to IDE?
I was supposed to have SATA hdd as well, but shipping screw'd up, and I got sent an ATA instead. I'm pretty sure that I will be able to figure out the solution tomorrow when I get to record the other information on the BSOD screens. I was just curious if there are any known issues or negatives associated with writing from a SATA cdrom drive to an IDE?
View 1 Replies
View Related
Jan 15, 2006
Wanted to do a fresh install. I want to wipe the HD clean before I start a clean install. Any programs out there for doing this?
View 7 Replies
View Related
