I had two computers -- one was a Windows 98 and the other an XP. I had four files on my 98 that I wanted to keep before I got rid of it, so I saved the files onto a floppy (the internet wasn't working on the 98). I have an XP that has a floppy drive, so I thought it would be fine.Some of the four files are rtf (WordPad) or doc.When I inserted the floppy, "A:" showed up, and the first two files transferred over to my desktop fine. As for the last two, when I double-click or try to open it in a window comes up, a different message pops up each time. One time it said, "The disk in drive A is not formatted. Would you like to format it now?" When I tried to open one of the rtf files in WordPad, it said that it couldn't open Word 6.0 files.
I have just got a pc with 2 dvd drives and a floppy drive, I'me not very clued up on media I think the top drive which is d:drive is a dvd rom which I think only plays dvd and cd's. The other drive while I know it is a dvd drive and I am thinking that this will be a burner drive. When I go to my computer I can only see the d:drive a:drive and c:drive should'ent there be an e:drive here as well: When I try to burn something using nero or roxio I am asked to put a disk in the d:drive should'ent this be the e:drive as thats what I think is the burning drive
Recently the computer has been trying to access my floppy drive both on boot up and when I shut down. There is no disk in the drive. The computer also gives no errors. It never used to do that. My concern is that something is set up incorrectly, in addition to it being annoying.I am contemplating formatting my HD and starting from scratch. But before I do any ideas what could be causing this?
Do any one of several things. Access my external drive, the floppy does a disc check for several seconds, right click explore a partition or folder and frequently yhe same thing happens. Put in audio cd to auto run, first the floppy has to do its chugga bugga chugga sound then the cd plays. Started over a week ago, or about when I formatted a floppy to make new Partition Magic emerg. discs. I rememeber something like this on a Win98SE machine a very long time ago. Tried some searches with not much luck, tried uninstalling in safe mode and rebooting, no joy.
I just did a clean install of Windows XP Pro with SP2. Everything seems to work fine but i wanted to make a bootup disk with a floppy. I inserted a new one into A: drive which is the floppy drive but the 'Insert Disk' window keeps popping up. I tried to format the disks but it's as though it doesn't recognize the disks. I checked the drivers and it says there's no conflicts. I used to have Win 2000 Pro and it recognized my floppy without any problems. Could the problem be my BIOS or WIN XP?
My floppy (A: drive) runs intermittently when my PC is on. Here is what I have come up with so far. This started after I reformatted and reinstalled XP Pro. During the reinstallation I did not use the floppy for anything so it is not hanging and waiting for a file. I have checked my registry for any reference to the floppy. I have uninstalled NAV and MS Office and it still happens. I have not made any changes in my BIOS. It boots into the hard drive first. I have cleaned out the recent documents file area. I have checked my startup folder. Sometime it will access the drive while surfing in IE and clicking to another web page. Just clicking the "My Computer" icon will make it run. I have Googled and tried everything I can find and the problem persist. Any thoughts? Thanks
Apparently she was trying to save some files to a floppy drive, and after several failed attempts, a "bubble" popped up (the little yellow pop-ups on the bottom right) that told her to run checkdisk on the A-drive. How does one go about accomplishing this? I've been looking around and found how to run it on the C-drive, is it any different for the A-drive?
I'd like to add a floppy drive to my newish XP based desktop (which came without), and am debating whether to put in an internal drive or get an external USB drive. Since I don't expect to be using it a lot (mainly to read floppies from previous systems), I'm leaning toward the USB drive for reasons ranging from convenience to leaving a free bay for another hard drive,
I receive the following message in Device Manager under the floppy drive: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). I have attempted to remove the drive and let XP recognize it and I have also tried uninstall and install of the driver both without success. I found similar hits to my problem through a google search and one had a solution for a CD rom drive problem from this forum.
Look at Device Manager and noticed the yellow on my floppy drive and tried the standard uninstall > restart fix but it does not work. My Computer shows no floppy drive. The note on startup is: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
System Been working okay, but when you log off the floppy drive would run for a second or two but now it runs for around 10 seconds. Is this a concern or not
I wanted to convert NTFS or FAT32 but my laptop don't have a floppy drive so I can not use the win98 or ME start up disk. I can not format my drive but I can use fdisk from the win98 cd.
I keep noticing that my floppy drive would activate when I'd go to log onto the computer or turn it off. I disabled the A drive and since then things are kind of going the way it was when I first bought this computer. I did manage to check the areas that were mentioned before. I found nothing that came close to what was mentioned to look for.Did I manage to contain this thing in the floppy? I still want it off of my computer.
Doing a fresh install of xp on a sata drive. When it asks to press F6 to install the third party drivers will I be able to load off the motherboard driver cd, or does it *have* to be a floppy.? Reason is the folder that contains the driver info on the cd is over 6mb so obviously won't fit on a floppy..and I'm not sure which I need to complete the install. If I habe the driver cd in the second cd drive will I be able to browse to it when asked? Failing that, just what info do I need to put on a floppy?
my hard drive will simply not boot. i am having a problem with NTLDR is missing. i have tried at least 4 different methods of fixing it. it will not boot from a floppy drive or cd. the hard drive is about a year old. i think the problem started after i used a cleaning program called PC-decrapifier.. thinking it would speed up my computer.. i would like to fix this problem asap and the hard drive isn't bad, because i can connect it to my other computer as a slave and access my files, but i still can not boot it even in another computer.
I have this sony vaio laptop, and the good people at sony decided not to give this drive the ability to boot from a usb device (external dvd or floppy)Unfortunately the DVD drive that was built in BROKE, and I need to install windows on this laptop using a brand new hard drive.I can't boot from the windows dvd, I can't boot from a floppy, the drive is totally empty so I can't put anything on it.I CAN however, connect it to another computer and format it, I thought I could make it into a MSDOS bootable drive (like when you format a floppy) but windows does not allow it on a drive this size.
when i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
Windows XP network wizard wants me to create a floppy disc to use on other machines on my home network. Problem is I have a media card reader that shows as four separate drives under My computer but no floppy disc drive.The network wizard only gives me the option of creating a disc on one of the four media card drives.I can't even browse for another drive.
I've blown my Win2K registry -- probably with an inopportune power loss. No backups, natch. And a complicated developer setup, probably on the order of days to rebuild ...
I found chkreg.exe on the MS site and was all set to try it when I realized ... my laptop doesn't have a floppy drive. The only format it is available in (that I can find) at MS is floppy.
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
Just got a new computer with Gigabyte GA-K8SNC-939 Motherboard. The problem is that on each boot , and shutdown, the floppy drive is accessed (i.e. motor runs ).The floppy drive is NOT selected as a boot option in the bios and the access on boot comes just after the 'Loading Personal Settings" screen. On shutdown it is just before the end , not immediately on shutdown.I seem to remember there was a Floppy Seek setting somewhere in Windows at one time, but I can't seem to find it in XP SP 2. As it happens well into the boot cycle, I don't think it's related to the motherboard.
Just downloaded the "Checkit PE Diagnostic ESD for DriverAgent" onto a floppy diskette as directed by DriverAgent.com. After placing it into the floppy drive and rebooting as directed, the program began to boot but hung up about halfway through the process and the PC would not boot until I removed the flopppy and then all worked well, except.now the floppy drive will not respond to any commands and the PC freezes completely. It will not respond until I manually shut it down from the tower button. Once I fire it up again all is well until the same happens if I try to use the floppy drive.
How do I reinstall Windows XP on my laptop (Compaq V5000 - which is several years old)? The laptop's cd-rom is dead. There is no floppy disk drive. The hard drive has crashed. I have read on some websites that I can make a bootable usb drive. However, I have not been succesful in making a bootable USB thumb drive when the laptop's BIOS doesnt support a USB device to be bootable.The only thing I do have is my desktop computer (which is working fine) and a USB external case for the laptop internal hard drive.
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
Helping a friend with his computer (Gateway w/XP Home SP2) and discovered his floppy drive does not detect the floppy disk when it is inserted. I was attempting to created Ghost images from the floppy and it would boot into the OS instead of the bootable floppy. Checked BIOS and boot sequence was correct (2nd boot device). Tried 3 different disks still no joy. Clicked on A:/ drive in Windows Explorer (with floppy disk inserted) and got "Device not accessible". Checked floppy drive properties in Device Manager and it says device is operating normally.
I have not yet opened the tower to check connections, but to date the tower has never been opened since the computer was purchased a couple of years ago. I do not know whether the floppy has ever been actually used. My friend doesn't remember ever using it.Checked the bootable floppy in my computer and it worked just fine.
I need to do a fresh install of Win XP SP3 (OEM) from a bootfloppy as I cannot access the CD. I tried the SP2 boot floppy install downloaded from MS. Didn't work. Are there any options to accomplish this? I also have another drive with Win 98 on it, but can't see the CD there as well.
I need a driver for the floppy, supported by XP, but different to the one it installs automatically.It´s due that I can´t write to the floppy, but when I disabled the onboard SIS AGP Graphics Adaptor on the Device Manager, then I´m able to write to it.The graphics driver was updated, but the problem persists. For this reason I need to test with a different floppy driver.But to find it on any site of the web has been impossible for me. Does anybody knows exactly where to find it ?
I want make a floppy disk in order to instal XP Pro SP2 in a Sata-2 HD.(Mobo recognize it as Sata-1)Where can I find latest files?Or I could use the ones which are in mobo's cd-rom? Mobo is Asus A8V Deluxe 2.0, agp, bios 1017.
the computer is a SolidPPC50 515 Model, which has no internal CD-ROM or Floppy drive. I have an external USB CD-ROM and Floppy, but there are only 2 USB ports, and no PS/2 keyboard slot, so I've had to use a USB keyboard. Despite the BIOS being compatible with booting through USB, it doesn't recognise the CD-ROM, but it does recognise the Floppy. I tried using a bootable floppy with the I386 folder from the install CD copied to the Hard Drive (formatted as FAT32), but when I run WINNT.exe then try to change over the Floppy drive for the CD-ROM, it can't find the CD-ROM drive.
If i buy a USB floppy drive, can my bios in my hp zv6015 boot from it in order to load external hard drive drivers so i can install win2k on that drive?
I am in desperate need of dual boot and would love to get this up and running
