Windows XP network wizard wants me to create a floppy disc to use on other machines on my home network. Problem is I have a media card reader that shows as four separate drives under My computer but no floppy disc drive.The network wizard only gives me the option of creating a disc on one of the four media card drives.I can't even browse for another drive.
View 8 RepliesI try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies View RelatedHow do I create a restore floppy disk for windows xp home edition.
View 11 Replies View RelatedWhen I bring up my start, all programs, accessories... and try to right click on windows explorer, to make a "shortcut", nothing happens.The item I right click on, blinks, but I am unable to move the item. Nor can I change the order, or create a shortcut to place on my desktop.I'm sure I caused this accidentally, but don't know how.
View 10 Replies View Related1. When I try to run the Network Setup Wizard, I get an error at the very end that Windows was unable to complete the setup
2. When I select Windows Firewall from the Control Panel, I says that it cannot start the service
3. When I select Network Connections>Local Area Connection>Properties>Advanced (tab) it says that it cannot display some of the properties of the connection because WMI information may be corrupted
4. When I try to configure my Intel network adapter, it says that it "failed to load a network component"
5. Also, this is not related to networking but the Windows Updater has failed to install every update for quite a while now.
Two computers running windows xp professional and each computer has 3 different NIC cards. 1 wireless, 1 wired through switch and 1 wired directly. I used the network setup wizard to configure file sharing however neither computer can see the other's shared folders. The only firewall running is the default windows firewall. I suspect it has something to do with the different NIC cards and it is trying to find shared folders using the wireless as opposed to through the LAN.
View 8 Replies View Relatedi set up network setup wizard which led to csnw show in the control panel moreover now the way i log in and log off has also changed and when i start my comp it asks for a password.when i press ctrl alt and delete together instead og task manager opening a window security sumthing opens up i want to restore my log in and log off to normal state and delete the csnw **** and restore the task manager.
View 1 Replies View RelatedI have a local area connection icon when i go into network connections--it was automatically set up with the laptop, and there used to be another icon i could click on to activate and select between detectable wi-fi's. This icon has mysteriously gone missing, does anyone know how to get it back? I tried a wireless connection setup and it didn't work.
View 6 Replies View RelatedThis is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I had two computers -- one was a Windows 98 and the other an XP. I had four files on my 98 that I wanted to keep before I got rid of it, so I saved the files onto a floppy (the internet wasn't working on the 98). I have an XP that has a floppy drive, so I thought it would be fine.Some of the four files are rtf (WordPad) or doc.When I inserted the floppy, "A:" showed up, and the first two files transferred over to my desktop fine. As for the last two, when I double-click or try to open it in a window comes up, a different message pops up each time. One time it said, "The disk in drive A is not formatted. Would you like to format it now?" When I tried to open one of the rtf files in WordPad, it said that it couldn't open Word 6.0 files.
View 7 Replies View RelatedI have just got a pc with 2 dvd drives and a floppy drive, I'me not very clued up on media I think the top drive which is d:drive is a dvd rom which I think only plays dvd and cd's. The other drive while I know it is a dvd drive and I am thinking that this will be a burner drive. When I go to my computer I can only see the d:drive a:drive and c:drive should'ent there be an e:drive here as well: When I try to burn something using nero or roxio I am asked to put a disk in the d:drive should'ent this be the e:drive as thats what I think is the burning drive
View 12 Replies View RelatedRecently the computer has been trying to access my floppy drive both on boot up and when I shut down. There is no disk in the drive. The computer also gives no errors. It never used to do that. My concern is that something is set up incorrectly, in addition to it being annoying.I am contemplating formatting my HD and starting from scratch. But before I do any ideas what could be causing this?
View 1 Replies View RelatedDo any one of several things. Access my external drive, the floppy does a disc check for several seconds, right click explore a partition or folder and frequently yhe same thing happens. Put in audio cd to auto run, first the floppy has to do its chugga bugga chugga sound then the cd plays. Started over a week ago, or about when I formatted a floppy to make new Partition Magic emerg. discs. I rememeber something like this on a Win98SE machine a very long time ago. Tried some searches with not much luck, tried uninstalling in safe mode and rebooting, no joy.
View 7 Replies View RelatedI just did a clean install of Windows XP Pro with SP2. Everything seems to work fine but i wanted to make a bootup disk with a floppy. I inserted a new one into A: drive which is the floppy drive but the 'Insert Disk' window keeps popping up. I tried to format the disks but it's as though it doesn't recognize the disks. I checked the drivers and it says there's no conflicts. I used to have Win 2000 Pro and it recognized my floppy without any problems. Could the problem be my BIOS or WIN XP?
View 6 Replies View RelatedMy floppy (A: drive) runs intermittently when my PC is on. Here is what I have come up with so far. This started after I reformatted and reinstalled XP Pro. During the reinstallation I did not use the floppy for anything so it is not hanging and waiting for a file. I have checked my registry for any reference to the floppy. I have uninstalled NAV and MS Office and it still happens. I have not made any changes in my BIOS. It boots into the hard drive first. I have cleaned out the recent documents file area. I have checked my startup folder. Sometime it will access the drive while surfing in IE and clicking to another web page. Just clicking the "My Computer" icon will make it run. I have Googled and tried everything I can find and the problem persist. Any thoughts? Thanks
View 4 Replies View RelatedApparently she was trying to save some files to a floppy drive, and after several failed attempts, a "bubble" popped up (the little yellow pop-ups on the bottom right) that told her to run checkdisk on the A-drive. How does one go about accomplishing this? I've been looking around and found how to run it on the C-drive, is it any different for the A-drive?
View 6 Replies View RelatedI'd like to add a floppy drive to my newish XP based desktop (which came without), and am debating whether to put in an internal drive or get an external USB drive. Since I don't expect to be using it a lot (mainly to read floppies from previous systems), I'm leaning toward the USB drive for reasons ranging from convenience to leaving a free bay for another hard drive,
View 3 Replies View RelatedI receive the following message in Device Manager under the floppy drive: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). I have attempted to remove the drive and let XP recognize it and I have also tried uninstall and install of the driver both without success. I found similar hits to my problem through a google search and one had a solution for a CD rom drive problem from this forum.
View 5 Replies View RelatedLook at Device Manager and noticed the yellow on my floppy drive and tried the standard uninstall > restart fix but it does not work. My Computer shows no floppy drive. The note on startup is: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
View 9 Replies View RelatedSystem Been working okay, but when you log off the floppy drive would run for a second or two but now it runs for around 10 seconds. Is this a concern or not
View 4 Replies View RelatedI wanted to convert NTFS or FAT32 but my laptop don't have a floppy drive so I can not use the win98 or ME start up disk. I can not format my drive but I can use fdisk from the win98 cd.
View 5 Replies View RelatedI keep noticing that my floppy drive would activate when I'd go to log onto the computer or turn it off. I disabled the A drive and since then things are kind of going the way it was when I first bought this computer. I did manage to check the areas that were mentioned before. I found nothing that came close to what was mentioned to look for.Did I manage to contain this thing in the floppy? I still want it off of my computer.
View 8 Replies View RelatedDoing a fresh install of xp on a sata drive. When it asks to press F6 to install the third party drivers will I be able to load off the motherboard driver cd, or does it *have* to be a floppy.? Reason is the folder that contains the driver info on the cd is over 6mb so obviously won't fit on a floppy..and I'm not sure which I need to complete the install. If I habe the driver cd in the second cd drive will I be able to browse to it when asked? Failing that, just what info do I need to put on a floppy?
View 4 Replies View Relatedmy hard drive will simply not boot. i am having a problem with NTLDR is missing. i have tried at least 4 different methods of fixing it. it will not boot from a floppy drive or cd. the hard drive is about a year old. i think the problem started after i used a cleaning program called PC-decrapifier.. thinking it would speed up my computer.. i would like to fix this problem asap and the hard drive isn't bad, because i can connect it to my other computer as a slave and access my files, but i still can not boot it even in another computer.
View 14 Replies View RelatedI have this sony vaio laptop, and the good people at sony decided not to give this drive the ability to boot from a usb device (external dvd or floppy)Unfortunately the DVD drive that was built in BROKE, and I need to install windows on this laptop using a brand new hard drive.I can't boot from the windows dvd, I can't boot from a floppy, the drive is totally empty so I can't put anything on it.I CAN however, connect it to another computer and format it, I thought I could make it into a MSDOS bootable drive (like when you format a floppy) but windows does not allow it on a drive this size.
View 13 Replies View Relatedwhen i first installed windows and what not i had a floppy drive installed.i need to do a windows repair and to do so i need to install these external sata drivers for my hard drives.i do not have access to a floppy drive and i would like to know if there was anyway to get around using the floppy drive to install these drivers one question i had was would i be able to change the drive letter of one of my dvd drives to A so that windows will install from there instead of an obsolete floppy drive A.
View 9 Replies View RelatedI want to migrate data from my old computer (98) to my new computer (XP) via serial cable. To do that I need to create a "Wizard Disk" for my old computer. I'm trying to use "File and Settings Transfer Wizard" on my new computer to create the Wizard CD, but that program doesn't recognize my CD-RW/DVD drive (E. The dropdown list used to select the output device includes choices for only F, G, H, and I, my 8-in-1 media drives. How can I
get it to write to my CD on drive E?
I've blown my Win2K registry -- probably with an inopportune power loss. No backups, natch. And a complicated developer setup, probably on the order of days to rebuild ...
I found chkreg.exe on the MS site and was all set to try it when I realized ... my laptop doesn't have a floppy drive. The only format it is available in (that I can find) at MS is floppy.
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies View RelatedJust got a new computer with Gigabyte GA-K8SNC-939 Motherboard. The problem is that on each boot , and shutdown, the floppy drive is accessed (i.e. motor runs ).The floppy drive is NOT selected as a boot option in the bios and the access on boot comes just after the 'Loading Personal Settings" screen. On shutdown it is just before the end , not immediately on shutdown.I seem to remember there was a Floppy Seek setting somewhere in Windows at one time, but I can't seem to find it in XP SP 2. As it happens well into the boot cycle, I don't think it's related to the motherboard.
View 7 Replies View RelatedI am installing an external hard drive via FireWire for a dedicated audio drive but New Hardware Wizard does not appear when I connect. Neither does it show the connected drive when I enter the Wizard manually in control panel. The FireWire shows to be working properly in Device Manager and the drivers are current.
View 1 Replies View Related