STOP 7B On Install Reboot With SATA Card
Aug 19, 2009
This is similar to the problem B1177 posted about, but I'm having no luck solving it myself. Basically, I have an IDE CDROM into the mobo, and a SATA HDD hooked to a Koutech Initio-chipset SATA controller card. In the card's setup at boot, it says the drive is "passthrough". I confess I'm not sure what that means. I'm new to SATA. I slipstreamed the Inic1620 drivers into a new CD with nLite, which stopped the "Setup cannot find any hard drives..." error, and allowed Setup to continue. After loading files, however, on restart I get the ever popular STOP 7B BSOD. Windows DOES begin to start, and the splash screen shows for a second or so, then it's into the ol' freezerino. Email to Koutech support has gone unanswered.
The machine is a Gigabyte 6IEML/P3900/500MB with an Intel 82815/801B chipset. I also tried restoring an image from another machine with an Intel chipset--though not the same one--and it stops at mup.sys, but that may have nothing to do with the SATA card. Interestingly, although Windows Setup couldn't find the drive, a Hiren's CD, with no SATA drivers loaded, could. Actually, a bit more than interesting isn't it?
View 2 Replies
ADVERTISEMENT
Aug 3, 2010
I have a Acer Aspire AM5640-E5520A Intel Pentium 2 QUAD, 2.4GHz with a MCP73PV motherboard and SATA drive. When I try to install XP (which I like better than Vista) the set up acts ok ,loading files, until it gets to "setup is starting windows".. Then I get the BSOD and a message saying STOP:0x0000007b. I have tried to change the bios setting for the HD to IDE but I do not find anything about storage or AHCI. All i see is a place to change raid configuration. Raid is disabled. But i have tried it with raid being enabled.
View 3 Replies
View Related
May 12, 2005
I'm trying to recover the data from a SATA drive in a new Dell computer. I have an old computer that has an IDE drive with XP on it. I tried to install that old drive into the other computer and boot off of it and see if it can see the files on the busted SATA drive. It boots up and the XP loading screen flickers very quickly and then the system reboots. If I start it in safe mode, it also reboots while its loading all the drivers. The last driver it shows is "agp440.sys"
View 7 Replies
View Related
Jul 1, 2010
I'm trying to dual boot Windows XP Pro 32-bit and Windows 7 with Windows 7 installed first; but this isn't the problem.
The problem is trying to boot Windows XP so it can install. I booted XP from an installation CD, then a blue setup screen appears, with some files apparently being loaded at the bottom of the screen (this is around the time pressing F6 to load drivers comes up). Then boom, I get blue screened with this error and cannot proceed:
A problem has been detected and windows has been shut down to prevent damage to your computer.
View 14 Replies
View Related
Aug 25, 2007
When first booting the system it gets to a windows screen and reboots - ad infinitum. When booted in "safe mode" it reads several files (in DOS - I think) and stops on reading a path on the "C" drive ending with something like ...../AGP 440 or ..../AGP 44? (or something smilar).
Do you think it is looking for graphics drivers?I have gone into the BIOS set up to change from a PCI graphics card to the on-board, and there appears to be no PCI card.
View 13 Replies
View Related
Jul 31, 2007
All of a sudden my HP notebook started to give the following message while starting, I am getting the following error message: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0x00000024 (0x00190203, 0x8239B008, 0xC0000102, 0x00000000)."
When I restart my computer, Windows tries to load, but I get the screen where I choose whether to start in Safe Mode, Safe Mode with Command Prompt, Last Known Good Configuration, or Start Windows Normally. I have tried to start all ways, and each time return to the 1st error message (above). I can not get to a prompt to run a CHKDSK, and am lost in what to try next.
View 5 Replies
View Related
Jul 5, 2005
My computer started to crash a bunch, so I reloaded windows. Now it does it all the time. It reboots randomly and does not record anything in the error log. It did however just give me a stop error. The error was 0x0000007E (0xC00001D, 0x804FFDB7, 0xF789E678, 0xF789E374)
View 2 Replies
View Related
Aug 22, 2005
i have a customer that is getting a stop error when they boot the pc. the error flashes too quickly on the screen to catch it. i know there's a registry entry somewhere that i can change that will change the reboot automatically setting. does anyone know what it is? there should also be a log file that will also show me the what the stop is, but everything i see is all binary data.
View 8 Replies
View Related
Aug 10, 2005
2 year old 2650 Dell laptop running XP. Installed a Linksys wireless G card and then a couple wks later the machine won't reboot. When powering up I get the blue Dell screen with "F2 for setup" and then it goes to a dark silver/black screen with a pretty white cursor flashing upper left corner of the display. Besides that I get nothing. Power down/up/sideways and nothing, except the same Dell screen noted above and the same silvery black screen w.cursor.
I've removed the batt so only the power cord is feeding it. No dice. I did somehow manage to get to my desktop a few min ago after 2 wks of no attempts but as soon as I tried to launch IE it froze and I had to power down and now I'm back to square one. Have also tried F8 a hundred times, as well as dancing on my left big toe while chanting to the computer gods.
View 1 Replies
View Related
Oct 20, 2007
Here�s the problem I have been looking at a friends dell latitude d600 equipped with a 1450 Broadcom wireless mini pci card Driver for the card is up to date, the card is brand new, every time I shut down, then reboot I have to reinstall the driver again,�.the driver keeps getting dropped for some reason��..Xp pro sp2���.
View 6 Replies
View Related
Sep 27, 2010
I was wondering if someone could help me with a little problem I have. When I install service pack 2 or anything past sp2, it does something with my video card. Normally everything runs fine until I try to play one of my PC games (for instance Half Life 2) then either the computer freezes up, or the monitor goes black and stops receiving a signal from the video card. I know that it's not a hardware issue because running off of a fresh windows install with no updates and sp1 everything's fine, but sp2 or later causes problems with my video card, I've tried updating everything (windows, hardware etc....) nothing works except running it with no updates and sp1, and as you know you cannot run much without sp2 at least. Any help would be appreciated, I've also attached a .txt with my specs from dxdiag.
View 3 Replies
View Related
Jan 30, 2006
this is really tricky to explain. i installed a graphics card a while ago, and since then i have been getting stop messages when i log on. i fixed the driver and now they are less frequent. also i receive notification that the registry has been restored from a backup. and spybot is reporting that it has been changed . i have no virus or spyware its a clean PC. is there a program i can use to collect data about these error messages to help you diagnose them.
View 3 Replies
View Related
Oct 2, 2009
can an on board grafix card/video card cause random blue screen stop errors?
View 6 Replies
View Related
Jan 28, 2008
I'm getting a Bad_Pool_Caller BSOD, along with some misc. BSOD's while trying to do a fresh install of Windows from a SATA Cdrom to an ATA IDE harddrive. Are there any known issues with trying to install an OS from SATA to IDE?
I was supposed to have SATA hdd as well, but shipping screw'd up, and I got sent an ATA instead. I'm pretty sure that I will be able to figure out the solution tomorrow when I get to record the other information on the BSOD screens. I was just curious if there are any known issues or negatives associated with writing from a SATA cdrom drive to an IDE?
View 1 Replies
View Related
Nov 17, 2007
I'm getting extremely frustrated with a problem I keep encountering trying to install a new SATA Hard Drive. I connect the SATA HD power & data cable I prepare a FDD with the necessary HD Cotroller Drivers from the motherboard utilities CD I boot the PC I insert my XP Pro (SP2) CD The PC boots from the CD I press F6 when prompted for 3rd party drivers When prompted, I install the necessary drivers from the FDD I then get to the bit where I chose to install Windows rather than do a Repair - when I select install, I'm told that no HD is present & that I need to exit by pressing F3 I've tried removing RAM to see if any is dodgy but still encounter the same problem.
I've attached the new SATA HD to a different PC & everything moves on perfectly but I quit before formatting the drive as I want to do a clean install on the other PC. I'm beginning to think that there might be a problem with the Motherboard but am open to suggestions (the old HD is stuck in an infitinte boot loop & am unable to slave it to another HD as it wont respond - maybe caused by a Motherboard problem?).
View 4 Replies
View Related
Apr 20, 2005
This is the first time i have tried to format a sata drive. I put the disk in and boot from the cd and it goes straight into the xp splash screen it doesn't even give me the chance to hit f6 thats the first problem.
View 4 Replies
View Related
Dec 24, 2008
I cannot install Windows XP onto a SATA hard drive. I read that I need to install the drivers for the HD separately during the Windows installation but how do I do that.
View 3 Replies
View Related
Dec 10, 2006
I can't install Windows to the SATA drive. It loads everything it needs, then when it tries to boot, it says the files aren't found. I'm guessing it can't read it without the drivers installed, but how do i do that with no OS? I was thinking of dual booting with linux.
View 2 Replies
View Related
May 3, 2007
After my last hard drive took a nosedive, I went out and bought a Western Digital Serial ATA 500 gb harddrive. I've physically put it in my Sony Vaio Desktop. I am trying to install Windows XP Professional now. When I get to the Setup screen is says Unknown Disk. I've already seemed to install the drivers for the new harddisk (they provided me a CD to install the drivers, it came with a program called "Lifeguard Tool" or something like that.
I have tried pressing F6 to install a RAID driver using the Windows setup... I pressed S... but then I find out I need a floppy disk drive... even if I had one, the box only came with a CD and not any floppy disks. I've tried slipstreaming Windows xp cd, service pack 2, and the drivers onto one bootable cd, it did not work... i'm too tired to go in there and find out why. *sigh*
View 3 Replies
View Related
Jan 30, 2007
I recently bought a WD 74GB Raptor harddrive to install XP on, but I'm having problems. Every time I load up XP setup from the setup CD, when it gets to the part where the installation options menu is about to appear, as it tries to boot windows from the CD, I get a BSOD and have to restart. I've tried running the CD with my other 80GB WD IDE hard drive inside and it doesn't cause this stop error. I've been screwing with this for 2 weeks now trying everything I can find on google and forums to fix this problem. I have the correct SATA drivers for my board as well for the drive of which I hit F6 for at the beginning of setup.
View 1 Replies
View Related
Sep 6, 2007
first and foremost is considering I have all of the old videos, files, pictures etc on my 80 GB Maxtor that I plan on transfering to the SATA hard drive since it's faster and I'd like to use the SATA as my primary...so all in all that makes things complicated in itself.
What I did was got everything ready, I didn't back up anything from the Maxtor (IDE) because that is out of the plan since I hope to do a simple drag and drop transfer of all the old stuff to my new SATA hard drive. I went into my BIOS and set the boot priorty to the SATA and it detected my SATA drive fine. I got out of the BIOS and inserted my Win XP upgrade disc. I let it go and also inserted the SiS 964 RAID Installation support disk so that it would install the SATA controller that was included in the Foxconn mobo. Then keeping my IDE drive intact, I deleted and formated the SATA to create a partition and installed XP on it......
View 5 Replies
View Related
Sep 8, 2005
My computer uses SATA HD. Right now it functions properly and boots into
Windows just fine. But I need to reinstall the XP Pro. So I boot from the CD
but the setup does not see any HD. Are there any special instructions on
installing on a SATA HD?
View 1 Replies
View Related
Jul 11, 2007
I'm having problems with windows xp on a laptop with preinstalled vista that has no floppy drive, the error "It doesn't detect the SATA HDD"; I tried the solution with a usb floppy drive and pressing f6, I found the correct driver and it works fine, I`m able to partition the HD and the process continues until it asks for the driver again but the USB floppy drive doesn't wortk in that part of the installation.
The next solution I found of this forum was making a custom XP CD including the SATA drivers with NLITE software, incredible software, without pressing f6 the HD is detected and again I'm able to partition and the installation begins, almost success!! but ... when it reboots to continue the installation it does't detect the HD again a lecture error displays and the classic press ctrl+alt+del to reboot!!! Am I missing something?
View 14 Replies
View Related
Mar 3, 2006
Just bought a 300Gig Maxtor SATA hard drive. My supports the connection onboard. How do I get Windows XP pro to reconized the full 300Gigs and not just 137Gigs. I have a Intel(R) Desktop board D85GVHZ Base System
Intel(R) Celeron CPU 3.06Hz 512MB of ram.
View 3 Replies
View Related
Aug 14, 2007
I have recently bought a new computer that came with windows vista as you may have guessed the experience mostly has not been a good one, with lots of compatibility issues. I want to dual boot Vista with XP but the problem is I have heard windows XP does not have the SATA drivers on the disc. I understand that you just need to insert a floppy and push F6 I think but the problem is I don't have a floppy drive! Is there anyway I can slipstream the drivers into the install or something?
View 2 Replies
View Related
Apr 13, 2010
I am having a heck of a time with this. I am trying to install Windows XP on a Lenovo R60e that has a SATA hard drive. I cannot for the life of me find the driver. I cannot seem to find anything resembling this driver on Lenovo's "Driver Matrix" or anywhere else on their site. Is there a generic one out there that anyone knows of? I want to slipstream this into an XP install, but I can't do it without the driver.
View 4 Replies
View Related
Mar 21, 2009
Will this motherboard: Asus m4a78 pro, need me to install extra sata drivers for winxp to support it? If so, where would i find them?
View 2 Replies
View Related
Dec 18, 2006
Long story short - Athlon/mobo on old unit died, 3 hd's (all WD eide 80 [C:], 40 [F:], 80 [G:]) & 1.5 gb memory good until mobo failure. Had shop install new mobo along with intel duo processor, new ATI video card, reinstalled memory & both 80 hd. Installed WD SATA 160 [replacing WD 40 hd] & tried to make it master boot record. Had shop transfer files from old WD 80 [C:] MBR to SATA 160, leaving files on 80. Did an repair install of xp on old 80 hd. Wouldn't boot. Tried reinstall of xp on SATA 160 & rebooted. Able to do so, but couldn't access internet for updates. Got sp2 update disc from technician & updated, then restarted.
View 9 Replies
View Related
Aug 2, 2005
I was wondering if it makes any sense to buy and install a SATA 300 controller to work with two WD SATA 300 drives. I kind of doubt I will achieve 300mb buffer to host transfers with only SATA 150 motherboard.
View 6 Replies
View Related
May 14, 2007
I have integrated the drivers onto the windows xp home disk using nlite as well as integrating sp2 but after the restart it keeps saying failed to load os, why should I do to install it on my sata drive? this is making me consider consider vista, does vista install to sata drives straight from the disk?
View 1 Replies
View Related
Oct 18, 2005
Doing a fresh install of xp on a sata drive. When it asks to press F6 to install the third party drivers will I be able to load off the motherboard driver cd, or does it *have* to be a floppy.? Reason is the folder that contains the driver info on the cd is over 6mb so obviously won't fit on a floppy..and I'm not sure which I need to complete the install. If I habe the driver cd in the second cd drive will I be able to browse to it when asked? Failing that, just what info do I need to put on a floppy?
View 4 Replies
View Related
