STOP 0x00000024 / Can't Reboot
Jul 31, 2007
All of a sudden my HP notebook started to give the following message while starting, I am getting the following error message: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0x00000024 (0x00190203, 0x8239B008, 0xC0000102, 0x00000000)."
When I restart my computer, Windows tries to load, but I get the screen where I choose whether to start in Safe Mode, Safe Mode with Command Prompt, Last Known Good Configuration, or Start Windows Normally. I have tried to start all ways, and each time return to the 1st error message (above). I can not get to a prompt to run a CHKDSK, and am lost in what to try next.
View 5 Replies
ADVERTISEMENT
Oct 2, 2007
It was initially having problems loading her desktop and profile, sometimes rebooting itself several times after the log-in before successfully starting windows. I attempted to export the registry this morning in regedit and as soon as it started, it rebooted. Now it always gives a stop screen no matter what start up option I try stop: 0x00000024 (0x001902fe, 0xf89b16dc, 0xf89b13d8, 0xf8171f81) ntfs.sys - address f8171f81 base at f8122000, datestamp 41107eea
I downloaded the microsoft startup disks and even booting with all of them, when I type r for the recovery console it takes me right to the same blue screen. From what I've read it seems like chkdsk might fix things but I cannot get a command prompt. Perhaps the Maxtor harddrive is failing and I downloaded Seagate diagnostics for DOS because their windows version isn't going to help me since I can't start that. I booted off the disk and get a screen full of mostly general info but then it tells me the command interpreter is not found and wants me to give it the full path for command.com. It can't recognize anything I try to type here but I don't know what syntax to even use here. If I can come up with an ASR disk from another XP Pro PC, I'm wondering would running the automated system restore found on the first microsoft disk be an option? Is there any other way to get to run chkdsk because I can't even get into recovery console?
View 5 Replies
View Related
Jan 3, 2009
computer has a BSoD, Stop error 0x00000024. Many of the guides on the Internet told me to run " chkdsk drive: /f " in Cmd. The problem is that I CANT go past the BSoD to access Cmd, even in safe mode. It is a Windows XP Home Edition.
View 2 Replies
View Related
Jul 30, 2010
i installed a new printer hp laserjet 4015 from the installation cd. previously 2015 version was installed. the installation went ok and the printing was also ok. system was shutdown normally. the next work day the system rebooted after the login was entered. this was solved by choosing 'last know good configuration' option of startup. however on re starting the same issued erupts. the system xp sp2 boots only when the last know good config option is chosen. the blue screen when opted for shows this error stop: 0x00000024 (0x001902fe, 0xf7a76854, 0xf7a76650, 0xa2c83692)
View 4 Replies
View Related
Jan 9, 2009
The computer I am working on is a Compaq Presario SR1020NX running Windows XP Home Edition. It connects to the internet via a Linksys WMP54G adapter. It tried to install Windows XP SP3 and it failed. While the update was trying to work correcting the changes it made it froze so my b/f powered it off. It rebooted just fine and he was on the internet for a little bit and then it stopped working. We recycled the modem and the router, I reset everything. Tried to uninstall and reinstall the adapter and nothing worked. I contacted Linksys and we tried to use WZC to connect to no avail. After troubleshooting a little more we determined that it had to do with the updates that were just installed on the pc. The tech suggested removing all the updates that were just installed and try again. I tried...but that is where everything went heywire. I uninstalled the first update and rebooted.....then got a blue screen flash up that said autochk program not found - skipping autocheck and then went to an endless boot cycle. I couldn't boot in safe mode, tried last known good config and nothing worked.
View 2 Replies
View Related
Oct 11, 2010
We are running Windows XP Professional SP3 on an HP Pavilion D4100Y. After a recent Windows Update, the computer was completing the update installation before shutting down, when the surge protector was accidentally turned off before the computer was finished with the updates. Now, when the computer powers up, it goes to the Windows XP splash screen, flashes blue for a quick second and the computer reboots.
If we access the Boot Menu, the Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Enable VGA Mode, Last Known Good Configuration options all lead to the OS Choices menu, which gives "Windows XP Professional" and "Windows Recovery Console" options. Both options reboot the computer. Only the Disable Automatic Restart option doesn't reboot the computer, and it gives a BSOD with STOP error 0x00000024........
View 19 Replies
View Related
Sep 5, 2009
I plugged my blackeberry into my computer - it has a new battery, though I don't know why that made a difference - and my computer crashed immediately. After the intel screen it brought me to a black screen with choice to reboot in safe mode, etc. No matter what option I chose, I was unsuccessful - just kept coming back to that screen. After troubleshooting I found my way to the blue screen with the error message stop: 0x00000024 (0x00190203, 0x8AFFA800, 0xc0000102, 0x00000000) and that I should disable virus protection etc. I inserted my xp disc but don't know how to get the system to boot from that.
View 14 Replies
View Related
Oct 2, 2009
i shut down while pc was running chkdsk (yes, I now know how stupid that was). I rebooted and that brought me to the blue screen that I have not been able to get past yet. Message reads: stop:0x00000024(0x00190203, 0x83160AB0, 0xC0000102, 0x00000000) I was able to change setup to get it to reboot from the cd drive and used the XP Diagnostics CD to run diagnostics. I ran the diagnostics for blue screen and hard drive errors - all tests passed. (This took several hours). I then tried to reboot from hard drive and got the same blue screen again. i then put in the Windows XP startup disk and came to the recovery console. Here I get a prompt I've never seen before: 1:J:minint
View 11 Replies
View Related
Apr 27, 2007
*** STOP: 0X00000024 (0X00190203, 0X82ECA898, 0X0000102, 0X00000000) This is the blue screen i get when i disable restart on errors. For what ever reason i cannot access this Hard Drive. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode............
View 8 Replies
View Related
Jun 21, 2007
Multiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
View 7 Replies
View Related
Mar 7, 2010
i was registering spyware doctor (pirately) but when i registered it required to reboot
then the problem started when i got the blue bar of windows xp moving then suddenly my pc restared itself then whenever it comes to the blue bar it gets restarted. and also i tried to make a windows MS DOS startup disk but it won't help i also uninstalled Spyware Doctor and quick heal internet security ( i did this in the directory services repair mode) i also performed chkdsk/:f
now when the pc starts it comes to the blue bar and suddenly a blue screen appears and it says STOP 0x00000024 (0x001902FE, 0xF7A5747C, 0xF7A57178, 0x84469889)
View 1 Replies
View Related
Jan 9, 2009
STOP: 0X00000024 (0X001902FA, 0XF7B2680C, 0XF7B2650C, 0X6F0AB6BD) This is the blue screen i get when i disable restart on errors. I've replaced the hard drive and even swapped it with a good drive with xp loaded....still the same error. I've tried running the restore disk...same thing. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode.
View 12 Replies
View Related
Apr 2, 2010
This is at the blue screen I get and I cannot get onto my computer. When you turn the computer on you get a black screen with the options
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally
If I choose any of those my computer goes to a blue screen with the code: ***Stop : 0x00000024 (0x00190203, 0x8AD0ADE8, OxC0000102, 0x00000000)
View 8 Replies
View Related
Jul 25, 2009
This is what it shows me when I turn on the computer and windows tried to load: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you�ve seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0X00000024 and a bunch of other numbers and letters..............
View 4 Replies
View Related
Aug 9, 2010
A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virsus, disk defragmentation or back up utilities. Check your hard drive configeration, and check for any updated drivers. Run CHDSK/ F to check for hard drive corrpution, and then restart your computer. Technical Informtion: *** STOP: 0X00000024 (0X00190203, 0X86F3B848, 0XC0000102, 0X00000000)
It said all of this. I cant uninstall anything because this error comes up right after it says windows. I already tried safe mode, start from the best mode where it work and etc. It is not workin. i already tried the F8 steps, tht did not work either. and i dnt knw wat they are tlkin about when they say run CHDSK/ F. ummm yea so i need alot of help. Hopefully someone can walk me through of how to fix this. And also i do not have the window xp installtion cd or disk. I was wondering where u get tht from because when i was lookin up how u fix this problem most said u need this cd. So pretty much the basic of my problem is tht i have the BSOD and it is 0x00000024 error and i can not log on or even get to the log on part.
View 2 Replies
View Related
Jul 5, 2005
My computer started to crash a bunch, so I reloaded windows. Now it does it all the time. It reboots randomly and does not record anything in the error log. It did however just give me a stop error. The error was 0x0000007E (0xC00001D, 0x804FFDB7, 0xF789E678, 0xF789E374)
View 2 Replies
View Related
Aug 22, 2005
i have a customer that is getting a stop error when they boot the pc. the error flashes too quickly on the screen to catch it. i know there's a registry entry somewhere that i can change that will change the reboot automatically setting. does anyone know what it is? there should also be a log file that will also show me the what the stop is, but everything i see is all binary data.
View 8 Replies
View Related
Aug 19, 2009
This is similar to the problem B1177 posted about, but I'm having no luck solving it myself. Basically, I have an IDE CDROM into the mobo, and a SATA HDD hooked to a Koutech Initio-chipset SATA controller card. In the card's setup at boot, it says the drive is "passthrough". I confess I'm not sure what that means. I'm new to SATA. I slipstreamed the Inic1620 drivers into a new CD with nLite, which stopped the "Setup cannot find any hard drives..." error, and allowed Setup to continue. After loading files, however, on restart I get the ever popular STOP 7B BSOD. Windows DOES begin to start, and the splash screen shows for a second or so, then it's into the ol' freezerino. Email to Koutech support has gone unanswered.
The machine is a Gigabyte 6IEML/P3900/500MB with an Intel 82815/801B chipset. I also tried restoring an image from another machine with an Intel chipset--though not the same one--and it stops at mup.sys, but that may have nothing to do with the SATA card. Interestingly, although Windows Setup couldn't find the drive, a Hiren's CD, with no SATA drivers loaded, could. Actually, a bit more than interesting isn't it?
View 2 Replies
View Related
Mar 18, 2006
When I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies
View Related
May 22, 2010
I read previous threads. My problem(s): Hard drive checks out. Problem started with "unable to defrag due to system files..." Found what I thought was problem software, tried to remove it, it froze up, I attempted to cancel it, I shut computer down. Start up gave 0X00000024 (0X00190292, 0XBA4D9840,0XBA4D953C, 0X804EF920). I tried booting from Windows CD. When I tried to get recovery console, it asked for admin. password. I don't remember ever setting one. I attempted to recover or reset by methods on "tweaking with Vishal". Didn't work.
View 12 Replies
View Related
Jul 15, 2008
My desktop currently boots, but before starting XP displays a warning that the system was restarted to protect from data loss after an unexpected start or system failure. All of the options (safe mode, safe mode with command prompt, safe mode with networking, last known good configuration, and start normally) don't work, they all lead to a short start-up and then the system restarts. I turned off auto-restart on system failure to see the blue screen that would tell me the error, and the error I got was "*** STOP: 0x00000024", which from what I've researched usually has to with a corrupted ntfs.sys file but I'm not sure. I tried booting the Windows Recovery Console from the OS choice menu and that goes straight to the error, and booting the System Recovery disc lets me start up the process, but when I press "r" to run the normal fixes (that don't include wiping the drive) the process goes nowhere. It starts, but after finished the loading bar it goes to a solid baby blue screen.
I direly need my files off of the hard drive, so I'm not really looking at a full system recovery as an option, I just need something that'll buy me enough time to transfer most of the content on the hard drive (around 160 gigs) to an external hard drive.
I've also tried testing both sticks of RAM by removing one and then the other to see if one is bad, but the error still persists.
View 14 Replies
View Related
Aug 28, 2009
I bought a bare bones computer kit (2,actually-- the other one is working fine) and have been running up against 2 diff bsod errors. The first error I encountered was 0x00000050. Symptoms: Computer stopped working, flashed bsod, couldn't reboot. It would appear to start, lights would come on, but screen would remain black and wouldn't get that reassuring little beep. If I turned off computer and waited 20 min or so, then it would start up again and work for a short while before getting bsod again. I tried reseating everything, making sure plugs were plugged. I pulled out one of the RAM then reinstalled windows xp after reformatting drive. Everything seemed to be working great!
To test and see if it was the RAM, I pulled out the working RAM and replaced it with the other one. I booted up and immediately got BSOD with different error message--the 0x00000024 one. It would restart, start me on the screen saying it encountered an error and which mode did I want to start in. No matter what I selected, I would get the bsod error. I put in the 'good' RAM. No change. I put in the other RAM so now both were in. No change. I put in the Windows XP disk and selected repair. It is now running chkdsk /r. did putting in the 'bad' RAM cause the disk error? It's a little late now to pull out the second RAM, but I'm worried that I'll still end up with an issue because I have both in there. After running this, should I run it again with the 'good' RAM only? or is there a different issue entirely going on that I should check?
View 6 Replies
View Related
Oct 25, 2007
My friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message.
She doesnt have a recovery cd with her.
View 14 Replies
View Related
Sep 16, 2005
Error message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies
View Related
Nov 18, 2004
Major virus infection on computer resulted in fdisk and reformat. I used Win 98SE to fdisk and reformat, as I couldn't for the life of me find a format on the Dell Operating reinstallation CD. (could be first mistake)
Used Win 98 SE startup diskette to start system w/CD rom support.
Navigated to D: Drive which containe the XP OS reinstallation. Navigated to I386 folder and typed WINNT to begin reinstalling files.
Start WIn XP setup and began copying files to HD.
Screen shows: The MS-DOS based portion of setup is complete. Setup will now restart you computer. After your computer restarts, WIN XP Setup will continue. Remove floppy, etc.
Computer restarts - did inspection of system, shows Win XP Setup, loading files (drivers, controllers, etc.)
Starting windows - Welcom to Setup:
1. Setup - press enter
2. Repair (using Repair Console)
3. Quite - F3
Pressed enter
Next message:
Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer. This may involve running a mfg supplied diagnostics or setup program.
Setup cannot continue Press F3
System then attempts reboot, attempts installation again by booting from HD. Then error message:
Stop error:
Stop: 0x0000007b
(0xf7cb063c, 0xc0000034, 0x00000000, 0x00000000)
At this point I must shut off the PC.
System:
Dell Deminsion 4600 series p4 processor @2.4 GHz
512 MD DDR SDRAM @ 400 MHz
128 MB DDR NVidia GeForce FX 5200 graphics card
80GB 7200 RMP Ultra ATA HD
Win XP Pro SP1
48x/24x/48x CD-RW Drive
SoundBlaster Live! w/ 5.1 support
I have looked on MS site for the error code and think I understand that the problem is either a hd controller device driver is not installing from the Dell Reinstallation CD and therefore stops the installation of the software. How I can possibly extract and install the driver setup may be looking for.
View 13 Replies
View Related
Jun 9, 2008
STOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
View 7 Replies
View Related
Feb 10, 2010
I have pentium 4 desktop.and windows xp is the operating system installed.it is now required to reboot.would you please suggest me How to reboot and what would be requirements for it?
View 5 Replies
View Related
Oct 31, 2009
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:50:51 PM, on 10/31/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe
C:WINDOWSExplorer.EXE
C:PROGRA~1AVGAVG8avgwdsvc.exe
C:Program FilesYahoo!Search ProtectionSearchProtection.exe
C:Program FilesDigital Media Readershwiconem.exe
C:Program FilesLexmark 1300 Serieslxdcamon.exe
C:Program FilesQuickTimeqttask.exe
C:PROGRA~1AVGAVG8avgrsx.exe
C:Program FilesJavajre6injqs.exe
C:PROGRA~1AVGAVG8avgnsx.exe
C:Program FilesCommon FilesRealUpdate_OB
ealsched.exe
C:WINDOWSsystem32svchost.exe
C:Program FilesJavajre6injusched.exe
C:WINDOWSsystem32ctfmon.exe
C:PROGRA~1AVGAVG8avgemc.exe
C:Program FilesLogitechSetPointSetPoint.exe
C:WINDOWSSTK02NSTK02NM.exe
C:Program FilesCommon FilesLogishrdKHAL2KHALMNPR.EXE
C:Program FilesAVGAVG8avgcsrvx.exe
C:WINDOWSsystem32lxdccoms.exe
C:Program FilesTrend MicroHijackThisHijackThis.exe
R1 - HKCUSoftwareMicrosoftInternet ExplorerMain,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCUSoftwareMicrosoftInternet ExplorerMain,Start Page = http://www.yahoo.com/
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLMSoftwareMicrosoftInternet ExplorerMain,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKCUSoftwareMicrosoftInternet ExplorerMain,Window Title = Windows Internet Explorer provided by Yahoo!
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O2 - BHO: &Yahoo! Toolbar Helper - {02478D38-C3F9-4efb-9B51-7695ECA05670} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:Program FilesCommon FilesAdobeAcrobatActiveXAcroIEHelper.dll
O2 - BHO: RealPlayer Download and Record Plugin for Internet Explorer - {3049C3E9-B461-4BC5-8870-4C09146192CA} - c:program files
eal
ealplayer
pbrowserrecordplugin.dll
O2 - BHO: WormRadar.com IESiteBlocker.NavFilter - {3CA2F312-6F6E-4B53-A66E-4E65E497C8C0} - C:Program FilesAVGAVG8avgssie.dll
O2 - BHO: UberButton Class - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:Program FilesYahoo!Commonyiesrvc.dll
O2 - BHO: YahooTaggedBM Class - {65D886A2-7CA7-479B-BB95-14D1EFB7946A} - C:Program FilesYahoo!CommonYIeTagBm.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:Program FilesJavajre6injp2ssv.dll
O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:Program FilesJavajre6libdeployjqsiejqs_plugin.dll
O2 - BHO: SingleInstance Class - {FDAD4DA1-61A2-4FD8-9C17-86F7AC245081} - C:Program FilesYahoo!CompanionInstallscpn2YTSingleInstance.dll
O3 - Toolbar: (no name) - {1017A80C-6F09-4548-A84D-EDD6AC9525F0} - (no file)
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:Program FilesYahoo!CompanionInstallscpn2yt.dll
O4 - HKLM..Run: [YSearchProtection] "C:Program FilesYahoo!Search ProtectionSearchProtection.exe"
O4 - HKLM..Run: [SunKistEM] C:Program FilesDigital Media Readershwiconem.exe
O4 - HKLM..Run: [Recguard] C:WINDOWSSMINSTRECGUARD.EXE
O4 - HKLM..Run: [lxdcamon] "C:Program FilesLexmark 1300 Serieslxdcamon.exe"
O4 - HKLM..Run: [Logitech Hardware Abstraction Layer] KHALMNPR.EXE
O4 - HKLM..Run: [Kernel and Hardware Abstraction Layer] KHALMNPR.EXE
O4 - HKLM..Run: [LXDCCATS] rundll32 C:WINDOWSSystem32spoolDRIVERSW32X863LXDCtime.dll,_RunDLLEntry@16
O4 - HKLM..Run: [QuickTime Task] "C:Program FilesQuickTimeqttask.exe" -atboottime
O4 - HKLM..Run: [TkBellExe] "C:Program FilesCommon FilesRealUpdate_OB
ealsched.exe" -osboot
O4 - HKLM..Run: [Adobe ARM] "C:Program FilesCommon FilesAdobeARM1.0AdobeARM.exe"
O4 - HKLM..Run: [Adobe Reader Speed Launcher] "C:Program FilesAdobeReader 8.0ReaderReader_sl.exe"
O4 - HKLM..Run: [SunJavaUpdateSched] "C:Program FilesJavajre6injusched.exe"
O4 - HKCU..Run: [Search Protection] C:Program FilesYahoo!Search ProtectionSearchProtection.exe
O4 - HKCU..Run: [ctfmon.exe] C:WINDOWSsystem32ctfmon.exe
O4 - HKCU..RunOnce: [Shockwave Updater] C:WINDOWSsystem32AdobeSHOCKW~1SWHELP~3.EXE -Update -1103471 -"Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; IEMB3; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; yie8)" -"http://www.shockwave.com/contentPlay...=jigsawpuzzles"
O4 - Global Startup: Logitech SetPoint.lnk = C:Program FilesLogitechSetPointSetPoint.exe
O4 - Global Startup: STK02N 2.3 PNP Monitor.lnk = ?
O9 - Extra button: Yahoo! Services - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:Program FilesYahoo!Commonyiesrvc.dll
O9 - Extra button: (no name) - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - (no file)
O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:WINDOWSNetwork Diagnosticxpnetdiag.exe
O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583} - C:WINDOWSNetwork Diagnosticxpnetdiag.exe
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O10 - Unknown file in Winsock LSP: c:windowssystem32
wprovau.dll
O15 - Trusted Zone: http://download.windowsupdate.com
O16 - DPF: Garmin Communicator Plug-In - https://my.garmin.com/static/m/cab/2...nAxControl.CAB
O16 - DPF: {0E5F0222-96B9-11D3-8997-00104BD12D94} (PCPitstop Utility) - http://www.pcpitstop.com/pcpitstop/PCPitStop.CAB
O16 - DPF: {18120951-D397-4D47-8476-85CD07C1A39C} - http://scanner.win-x-defender.com/setup/webinst.cab
O16 - DPF: {193C772A-87BE-4B19-A7BB-445B226FE9A1} (ewidoOnlineScan Control) - http://download.ewido.net/ewidoOnlineScan.cab
O16 - DPF: {2BC66F54-93A8-11D3-BEB6-00105AA9B6AE} (Symantec AntiVirus scanner) - http://security.symantec.com/sscv6/S...in/AvSniff.cab
O16 - DPF: {30528230-99f7-4bb4-88d8-fa1d4f56a2ab} (Installation Support) - C:Program FilesYahoo!CommonYinsthelper.dll
O16 - DPF: {31E68DE2-5548-4B23-88F0-C51E6A0F695E} (Microsoft PID Sniffer) - https://support.microsoft.com/OAS/ActiveX/odc.cab
O16 - DPF: {56393399-041A-4650-94C7-13DFCB1F4665} (PSFormX Control) - http://ca.com/us/securityadvisor/pestscan/pestscan.cab
O16 - DPF: {5ED80217-570B-4DA9-BF44-BE107C0EC166} (Windows Live Safety Center Base Module) - http://cdn.scan.onecare.live.com/res...scbase5483.cab
O16 - DPF: {63DF43C2-469A-41F3-B119-17B1ACE8BB50} (Sony SNC-CS3 Image Viewer) - http://61.9.217.44:1025/home/SonySncCs3View.cab
O16 - DPF: {644E432F-49D3-41A1-8DD5-E099162EEEC5} (Symantec RuFSI Utility Class) - http://security.symantec.com/sscv6/S.../bin/cabsa.cab
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsof...?1125242674640
O16 - DPF: {917623D1-D8E5-11D2-BE8B-00104B06BDE3} (CamImage Class) - http://www.hihiltonhead.com/AxisCamControl.ocx
O16 - DPF: {A922B6AB-3B87-11D3-B3C2-0008C7DA6CB9} (InetDownload Class) - https://media.pineconeresearch.com/A...oadcontrol.cab
O16 - DPF: {A93B47FD-9BF6-4DA8-97FC-9270B9D64A6C} (VaPgCtrl Class) - http://www.4xem.com/downloads/cab/WPT/h263ctrl.cab
O16 - DPF: {B38870E4-7ECB-40DA-8C6A-595F0A5519FF} (MsnMessengerSetupDownloadControl Class) - http://messenger.msn.com/download/Ms...Downloader.cab
O16 - DPF: {B8BE5E93-A60C-4D26-A2DC-220313175592} (MSN Games - Installer) - http://cdn2.zone.msn.com/binFramewor...o.cab56649.cab
O18 - Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:Program FilesAVGAVG8avgpp.dll
O20 - Winlogon Notify: !SASWinLogon - C:Program FilesSUPERAntiSpywareSASWINLO.dll
O20 - Winlogon Notify: avgrsstarter - C:WINDOWSSYSTEM32avgrsstx.dll
O20 - Winlogon Notify: GoToAssist - C:Program FilesCitrixGoToAssist570G2AWinLogon.dll
O23 - Service: AVG8 E-mail Scanner (avg8emc) - AVG Technologies CZ, s.r.o. - C:PROGRA~1AVGAVG8avgemc.exe
O23 - Service: AVG8 WatchDog (avg8wd) - AVG Technologies CZ, s.r.o. - C:PROGRA~1AVGAVG8avgwdsvc.exe
O23 - Service: GoToAssist - Citrix Online, a division of Citrix Systems, Inc. - C:Program FilesCitrixGoToAssist570g2aservice.exe
O23 - Service: Google Update Service (gupdate1c9fbe4f8b4930e) (gupdate1c9fbe4f8b4930e) - Google Inc. - C:Program FilesGoogleUpdateGoogleUpdate.exe
O23 - Service: Google Software Updater (gusvc) - Google - C:Program FilesGoogleCommonGoogle UpdaterGoogleUpdaterService.exe
O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:Program FilesCommon FilesInstallShieldDriver11Intel 32IDriverT.exe
O23 - Service: Java Quick Starter (JavaQuickStarterService) - Sun Microsystems, Inc. - C:Program FilesJavajre6injqs.exe
O23 - Service: Logitech Bluetooth Service (LBTServ) - Logitech, Inc. - C:Program FilesCommon FilesLogitechBluetoothLBTServ.exe
O23 - Service: lxdc_device - - C:WINDOWSsystem32lxdccoms.exe
O23 - Service: NVIDIA Display Driver Service (NVSvc) - NVIDIA Corporation - C:WINDOWSsystem32
vsvc32.exe
O23 - Service: PrismXL - New Boundary Technologies, Inc. - C:Program FilesCommon FilesNew BoundaryPrismXLPRISMXL.SYS
O23 - Service: Yahoo! Updater (YahooAUService) - Yahoo! Inc. - C:Program FilesYahoo!SoftwareUpdateYahooAUService.exe
--
End of file - 10370 bytes
View 6 Replies
View Related
Oct 17, 2007
I went away for business for about 2 months. I come back and my PC does not boot at all. Nothing happens when I hit the power button. I've unplugged it and when I put the plug in, the lights flash for a moment then the thing dies. I've tried to hold down the power button and stuff but it just won't start. I built it in July 06 and its been running well until I get back from this trip.
View 13 Replies
View Related
Dec 23, 2004
I am at home. A co-worker is also at home. She has a VNC connection to the computer in her cube at work. We need to reboot the machine that's in my cube at work. She has to do it remotely, as I don't have the VNC software here. Is a way to do this via WMI
View 3 Replies
View Related
Jun 12, 2006
My question is: In Win XP Pro SP2, is there a reboot command (executable) in the Windows (or any other) folder? If so, would you please tell me where it is. I would like to use the task scheduler to reboot the computer at the start of each day, and hopefully without going through a lot of hoops.
View 2 Replies
View Related
