This is at the blue screen I get and I cannot get onto my computer. When you turn the computer on you get a black screen with the options
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally
If I choose any of those my computer goes to a blue screen with the code: ***Stop : 0x00000024 (0x00190203, 0x8AD0ADE8, OxC0000102, 0x00000000)
This is what it shows me when I turn on the computer and windows tried to load: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you�ve seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0X00000024 and a bunch of other numbers and letters..............
View 4 Replies View Relatedi installed a new printer hp laserjet 4015 from the installation cd. previously 2015 version was installed. the installation went ok and the printing was also ok. system was shutdown normally. the next work day the system rebooted after the login was entered. this was solved by choosing 'last know good configuration' option of startup. however on re starting the same issued erupts. the system xp sp2 boots only when the last know good config option is chosen. the blue screen when opted for shows this error stop: 0x00000024 (0x001902fe, 0xf7a76854, 0xf7a76650, 0xa2c83692)
View 4 Replies View RelatedI plugged my blackeberry into my computer - it has a new battery, though I don't know why that made a difference - and my computer crashed immediately. After the intel screen it brought me to a black screen with choice to reboot in safe mode, etc. No matter what option I chose, I was unsuccessful - just kept coming back to that screen. After troubleshooting I found my way to the blue screen with the error message stop: 0x00000024 (0x00190203, 0x8AFFA800, 0xc0000102, 0x00000000) and that I should disable virus protection etc. I inserted my xp disc but don't know how to get the system to boot from that.
View 14 Replies View Relatedi shut down while pc was running chkdsk (yes, I now know how stupid that was). I rebooted and that brought me to the blue screen that I have not been able to get past yet. Message reads: stop:0x00000024(0x00190203, 0x83160AB0, 0xC0000102, 0x00000000) I was able to change setup to get it to reboot from the cd drive and used the XP Diagnostics CD to run diagnostics. I ran the diagnostics for blue screen and hard drive errors - all tests passed. (This took several hours). I then tried to reboot from hard drive and got the same blue screen again. i then put in the Windows XP startup disk and came to the recovery console. Here I get a prompt I've never seen before: 1:J:minint
View 11 Replies View RelatedSTOP: 0X00000024 (0X001902FA, 0XF7B2680C, 0XF7B2650C, 0X6F0AB6BD) This is the blue screen i get when i disable restart on errors. I've replaced the hard drive and even swapped it with a good drive with xp loaded....still the same error. I've tried running the restore disk...same thing. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode.
View 12 Replies View RelatedMy friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message.
She doesnt have a recovery cd with her.
It was initially having problems loading her desktop and profile, sometimes rebooting itself several times after the log-in before successfully starting windows. I attempted to export the registry this morning in regedit and as soon as it started, it rebooted. Now it always gives a stop screen no matter what start up option I try stop: 0x00000024 (0x001902fe, 0xf89b16dc, 0xf89b13d8, 0xf8171f81) ntfs.sys - address f8171f81 base at f8122000, datestamp 41107eea
I downloaded the microsoft startup disks and even booting with all of them, when I type r for the recovery console it takes me right to the same blue screen. From what I've read it seems like chkdsk might fix things but I cannot get a command prompt. Perhaps the Maxtor harddrive is failing and I downloaded Seagate diagnostics for DOS because their windows version isn't going to help me since I can't start that. I booted off the disk and get a screen full of mostly general info but then it tells me the command interpreter is not found and wants me to give it the full path for command.com. It can't recognize anything I try to type here but I don't know what syntax to even use here. If I can come up with an ASR disk from another XP Pro PC, I'm wondering would running the automated system restore found on the first microsoft disk be an option? Is there any other way to get to run chkdsk because I can't even get into recovery console?
I read previous threads. My problem(s): Hard drive checks out. Problem started with "unable to defrag due to system files..." Found what I thought was problem software, tried to remove it, it froze up, I attempted to cancel it, I shut computer down. Start up gave 0X00000024 (0X00190292, 0XBA4D9840,0XBA4D953C, 0X804EF920). I tried booting from Windows CD. When I tried to get recovery console, it asked for admin. password. I don't remember ever setting one. I attempted to recover or reset by methods on "tweaking with Vishal". Didn't work.
View 12 Replies View Relatedgetting a BSOD every day, sometimes two or three times a day. And when it happens, atleast once in that say the computer won't turn back on. It'll BSOD and then when he goes to boot it back up, it'll load the Bios screen and turn itself back off, with no warning. Here's the line of code he gave me:BCCode : 10000050 BCP1 : B3D25FFC BCP2 : 00000000 BCP3 :BD11FD61BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1file names: C:DOCUME~1USERLOCALS ~1Temp WERb815.dir00Mini071110-01.dmpC:DOCUME~1USERLOCALS~1TempWERb815.dir00sysdata.xml
View 7 Replies View RelatedThis has happened twice.I wake up in the morning and my computer has a blue screen with a stop error message:0x0000008E.
View 6 Replies View RelatedAll of a sudden my HP notebook started to give the following message while starting, I am getting the following error message: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0x00000024 (0x00190203, 0x8239B008, 0xC0000102, 0x00000000)."
When I restart my computer, Windows tries to load, but I get the screen where I choose whether to start in Safe Mode, Safe Mode with Command Prompt, Last Known Good Configuration, or Start Windows Normally. I have tried to start all ways, and each time return to the 1st error message (above). I can not get to a prompt to run a CHKDSK, and am lost in what to try next.
computer has a BSoD, Stop error 0x00000024. Many of the guides on the Internet told me to run " chkdsk drive: /f " in Cmd. The problem is that I CANT go past the BSoD to access Cmd, even in safe mode. It is a Windows XP Home Edition.
View 2 Replies View RelatedThe computer I am working on is a Compaq Presario SR1020NX running Windows XP Home Edition. It connects to the internet via a Linksys WMP54G adapter. It tried to install Windows XP SP3 and it failed. While the update was trying to work correcting the changes it made it froze so my b/f powered it off. It rebooted just fine and he was on the internet for a little bit and then it stopped working. We recycled the modem and the router, I reset everything. Tried to uninstall and reinstall the adapter and nothing worked. I contacted Linksys and we tried to use WZC to connect to no avail. After troubleshooting a little more we determined that it had to do with the updates that were just installed on the pc. The tech suggested removing all the updates that were just installed and try again. I tried...but that is where everything went heywire. I uninstalled the first update and rebooted.....then got a blue screen flash up that said autochk program not found - skipping autocheck and then went to an endless boot cycle. I couldn't boot in safe mode, tried last known good config and nothing worked.
View 2 Replies View RelatedThis computer has Windows XP. I am not the first user of this computer, and cannot figure out why an alarm is sounding. I first thought it might be security when I am online, or auto updates, but it happens when I am just word processing or logged in. Will not stop until turn off computer. And sometimes will begin again immediately after restart.
View 6 Replies View RelatedWe are running Windows XP Professional SP3 on an HP Pavilion D4100Y. After a recent Windows Update, the computer was completing the update installation before shutting down, when the surge protector was accidentally turned off before the computer was finished with the updates. Now, when the computer powers up, it goes to the Windows XP splash screen, flashes blue for a quick second and the computer reboots.
If we access the Boot Menu, the Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Enable VGA Mode, Last Known Good Configuration options all lead to the OS Choices menu, which gives "Windows XP Professional" and "Windows Recovery Console" options. Both options reboot the computer. Only the Disable Automatic Restart option doesn't reboot the computer, and it gives a BSOD with STOP error 0x00000024........
*** STOP: 0X00000024 (0X00190203, 0X82ECA898, 0X0000102, 0X00000000) This is the blue screen i get when i disable restart on errors. For what ever reason i cannot access this Hard Drive. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode............
View 8 Replies View RelatedMultiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
i was registering spyware doctor (pirately) but when i registered it required to reboot
then the problem started when i got the blue bar of windows xp moving then suddenly my pc restared itself then whenever it comes to the blue bar it gets restarted. and also i tried to make a windows MS DOS startup disk but it won't help i also uninstalled Spyware Doctor and quick heal internet security ( i did this in the directory services repair mode) i also performed chkdsk/:f
now when the pc starts it comes to the blue bar and suddenly a blue screen appears and it says STOP 0x00000024 (0x001902FE, 0xF7A5747C, 0xF7A57178, 0x84469889)
I turnd off my laptop using the power button as aposed to shuting it down.. this may have been the wrong thing to do however i was in a rush and had done it befor with no problem.I have gone to turn on my laptop. insted of loading up the usual windows xp user select screen i have been directed to a screen that states "we apologise for the inconvenience but windows did not start successfully. a recent hardware or software change might have caused this."
View 2 Replies View RelatedA problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virsus, disk defragmentation or back up utilities. Check your hard drive configeration, and check for any updated drivers. Run CHDSK/ F to check for hard drive corrpution, and then restart your computer. Technical Informtion: *** STOP: 0X00000024 (0X00190203, 0X86F3B848, 0XC0000102, 0X00000000)
It said all of this. I cant uninstall anything because this error comes up right after it says windows. I already tried safe mode, start from the best mode where it work and etc. It is not workin. i already tried the F8 steps, tht did not work either. and i dnt knw wat they are tlkin about when they say run CHDSK/ F. ummm yea so i need alot of help. Hopefully someone can walk me through of how to fix this. And also i do not have the window xp installtion cd or disk. I was wondering where u get tht from because when i was lookin up how u fix this problem most said u need this cd. So pretty much the basic of my problem is tht i have the BSOD and it is 0x00000024 error and i can not log on or even get to the log on part.
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
Turn the computer on, it starts to boot, I see the compaq splash screen then the blue windows is starting. Then it just restarts the process over. I have tried to repair windows: The F8 to last known good config & F8 safe and it just restarts from both of those as well. Win XP SP3 Currently doing this: You can boot from the cd and press R to go to the recovery console. Your best bet is to try running Checkdisk. So once in the recovery console, type chkdsk /r and press enter. It could take from 20 minutes to a couple of hours, depending on the repairs it needs to make
View 14 Replies View RelatedI got the blue screen error code stop: c0000218 have no idea what this means.
View 1 Replies View RelatedI occasionally get a stop message and blue screen. It happens randomly, sometimes I am just on my desktop with no programs running. Here are some details:
STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0xF3C70140) atinyvxx.sys - Address F3C70140 base at F3C52000, Date Stamp 41f70216
I've been having some issues with the DRIVER_IRQL_NOT_LESS_OR_EQUAL_TO_ZERO (0x000000d1) as well as IRQL_NOT_LESS_OR_EQUAL (0x0000000A)and STOP: 0x1000008e and 0x1000007f.I'm crashing only while playing games. The crashes seem to occur more often if I'm playing a game while running something else such as streaming a podcast. The crashes are also occuring with greater frequency with each day that passes. I reformatted after these started happening, and i replaced my RAM as well, as that seemed the most likely culprit.
View 14 Replies View RelatedI have borrowed a school computer for the summer, it runs XP. Today, when I booted it up, it displayed a blue screen with a stop message. "c0000135 <unable to locate component> winsrv was not found. I have spent the afternoon searching for a way to fix this, but all the windows help sites require you to download stuff, and since I can't get the OS to actually turn on, I obviously can't log on to a website.
View 4 Replies View RelatedI'm working on an HP 530 and when I boot up, it blue screens with a stop code.The code is 0x0000007B So far, I have attempted F8 w/o success, tested and swapped the RAM, and run checks on the Hard Disk.G-Parted can see and partition the Hard disk , but Windows Repair disk can't see the Hard Disk.I have re-imaged this unit and it completed successfully, but when I rebooted, it BSOD'd again.There is nothing in the BIOS to change it to IDE from SATA and the self-test is reporting no errors.
View 12 Replies View RelatedThe Technical Information is this: *** STOP: 0x0000008E (0xC0000005, 0x00000000, 0xF2F22A50, 0x00000000) I'm getting tired of this happening every day.
View 14 Replies View RelatedFour or five months ago I installed a new HD in my Dell Inpiron 700m laptop. I used Acronis True Image, as I've done previously with my Latitude. Initially, I had some trouble, because apparantly one or two drivers were missing. I found a discussion about this online and ran through the steps to fix the problem and everything seemed fine. A couple days after the installation I received the blue stop error screen for the first time. Restarted the computer and hadn't had it appear again until last week. The other night, it was coming up every five minutes, shutting down the computer.
View 24 Replies View Related